 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| microcontrollers data sheet v 1.1, 2015-05 tc290 / TC297 / tc298 / tc299 32-bit single-chip micocontroller bb-step 32-bit single-chip micocontroller 32-bit microcontroller tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06
edition 2015-05 published by infineon technologies ag 81726 munich, germany ? 2015 infineon technologies ag all rights reserved. legal disclaimer the information given in th is document shall in no event be rega rded as a guarantee of conditions or characteristics. with respect to any ex amples or hints given herein, any typi cal values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including wit hout limitation, warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices, please contact the nearest infineon technologies office ( www.infineon.com ) warnings due to technical requirements, components may contain dangerous substances. for in formation on the types in question, please contact the neares t infineon technologies office. infineon technologies components may be used in life-suppo rt devices or systems only with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or sys tem. life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. if t hey fail, it is reasonable to assume that the health of the user or other persons may be endangered. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step data sheet 3 v 1.1 2015-05 revision history page or item subjects (major changes since previous revision) v 1.1, 2015-05 the history is documented in the last chapter tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step data sheet 4 v 1.1 2015-05 trademarks of infineon technologies ag aurix?, c166?, canpak?, ci pos?, cipurse?, econopac k?, coolmos?, coolset?, corecontrol?, crossav e?, dave?, di-pol?, easypim?, econobridge?, econodual?, econopim?, econopack?, eicedriver?, eupec?, fcos?, hitfet?, hybridpack?, i2rf?, isoface?, isopack?, mipaq?, modstack?, my-d?, novalithic?, optimos?, origa?, powercode?; primarion?, pr imepack?, primestack?, pr o-sil?, profet?, rasic?, reversave?, satric?, si eget?, sindrion?, sipmos?, smartl ewis?, solid flash?, tempfet?, thinq!?, trenchstop?, tricore?. other trademarks advance design system? (ads) of agilent te chnologies, amba?, arm?, multi-ice?, keil?, primecell?, realview?, thumb?, vision? of arm limited, uk. autosar? is licensed by autosar development partnership. bluetooth? of bluetooth sig inc. cat-iq? of dect forum. colossus?, firstgps? of trimble navigation ltd. emv? of emvc o, llc (visa holdings in c.). epcos? of epcos ag. flexgo? of microsoft corp oration. flexray? is licensed by flexray consortium. hyperterminal? of hilgraeve incorporated. iec? of commission electrot echnique internationale. irda? of infrared data association corporation. iso? of international organization for standardization. matlab? of mathworks, inc. maxim? of maxim integrated products, inc. microtec?, nucleus? of mentor graphics corporation. mipi? of mipi allianc e, inc. mips? of mips technologies, inc., u sa. murata? of murata manufacturing co., microwave office? (mwo) of applied wave research inc., omnivision? of omnivision technologies, inc. openwave? openwave systems inc. red hat? red hat, inc. rfmd? rf micro devices, inc. sirius? of si rius satellite radio inc. solaris? of sun microsystems, inc. spansion? of spansion llc ltd. symbian? of symbian software limited. taiyo yuden? of taiyo yuden co. teaklite? of ceva, inc. tektro nix? of tektronix inc. toko? of toko kabushiki kaisha ta. unix? of x/open company limited. verilo g?, palladium? of cadence design systems, inc. vlynq? of texas instruments incorpor ated. vxworks?, wind river? of wind ri ver systems, inc. zetex? of diodes zetex limited. last trademarks update 2011-11-11 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step data sheet toc-1 v 1.1, 2015-05 1 summary of features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 package and pinning definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 tc299x pin definition and functions: bga516 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.1 tc299x bga516 package variant pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1.2 emergency stop function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 2.1.3 pull-up/pull-down reset behav ior of the pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 2.2 tc298x pin definition and functions: bga416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 2.2.1 tc298x bga416 package variant pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 2.2.2 emergency stop function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 2.2.3 pull-up/pull-down reset behav ior of the pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 2.3 TC297x pin definition and functions: bga292 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 2.3.1 TC297x bga292 package variant pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 2.3.2 emergency stop function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290 2.3.3 pull-up/pull-down reset behav ior of the pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290 2.4 tc29x bare die pad definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 2.4.1 pad openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 2.4.2 emergency stop function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 2.4.3 pull-up/pull-down reset behav ior of the pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 3 electrical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 3.1 parameter interpretation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 3.2 absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 3.3 pin reliability in overload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 3.4 operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 3.5 5 v / 3.3 v switchable pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 3.6 high performance lvds pads (lvdsh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 3.7 medium performance lvds pads (lvdsm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6 3.8 vadc parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 3.9 dsadc parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353 3.10 mhz oscillator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 3.11 back-up clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359 3.12 temperature sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 3.13 power supply current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 3.13.1 calculating the 1.3 v current consumpt ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 3.14 power-up and power-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 3.14.1 external supply mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 3.14.2 single supply mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 3.14.3 external supply mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372 3.14.4 single supply mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 3.15 reset timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 3.16 evr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378 3.17 phase locked loop (pll) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383 3.18 eray phase locked loop (eray_pll) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 3.19 ac specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 3.20 jtag parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 3.21 dap parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 3.22 asclin spi master timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 3.23 asclin spi master timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394 3.24 qspi timings, master and slave mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 table of contents tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step data sheet 2 v 1.1 2015-05 3.25 qspi timings, master and slave mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 3.26 msc timing 5 v operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410 3.27 msc timing 3.3 v operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415 3.28 ethernet interface (eth) characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 3.28.1 eth measurement reference points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 3.28.2 eth management signal parameters (eth_mdc, eth_mdio ) . . . . . . . . . . . . . . . . . . . . . . . . . 421 3.28.3 eth mii parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 3.28.4 eth rmii parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423 3.29 e-ray parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 3.30 hsct parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 3.31 inter-ic (i2c) interface timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 3.32 ebu timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 3.32.1 bfclko output clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 3.32.2 ebu asynchronous timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 3.32.3 ebu burst mode access timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 3.32.4 ebu arbitration signal timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438 3.33 cif parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 3.34 flash target parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445 3.35 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448 3.35.1 package parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449 3.35.2 tc290 carrier tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449 3.36 quality declarations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451 4 history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452 4.1 changes from version version 0.6 to 0.71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452 4.2 changes from version version 0.71 to 1.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 4.3 changes from version version 0.71 to 1.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 467 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step summary of features data sheet 1-1 v 1.1 2015-05 1 summary of features the tc29x product family has the following features: ? high performance microcontroller with three cpu cores ? one 32-bit super-scalar tricore cpus (tc1.6p), having the following features: ? superior real-time performance ? strong bit handling ? fully integrated dsp capabilities ? multiply-accumulate unit able to sustain 2 mac operations per cycle ? up to 300 mhz operation at full temperature range ? up to 120 / 240 kbyte data scratch-pad ram (dspr) ? up to 32 kbyte instruct ion scratch-pad ram (pspr) ? 16 / 32 kbyte instruction cache (icache) ? 8 kbyte data cache (dcache) ? lockstepped shadow core for tc1.6p core 1 ? multiple on-chip memories ? all embedded nvm and sram are ecc protected ? up to 8 mbyte program flash memory (pflash) ? up to 768 kbyte data flash memory (dflash) usable for eeprom emulation ? 32 kbyte memory (lmu) ? bootrom (brom) ? 128-channel dma controller with safe data transfer ? sophisticated interrupt system (ecc protected) ? high performance on-chip bus structure ? 64-bit cross bar interconnect (sri) giving fast pa rallel access between busmasters, cpus and memories ? 32-bit system peripheral bus (spb) fo r on-chip peripheral and functional units ? one bus bridge (sfi bridge) ? safety management unit (smu) handling safety monitor alarms ? memory test unit with ecc, memory initialization and mbist functions (mtu) ? hardware i/o monitor (iom) for checking of digital i/o ? versatile on-chip peripheral units ? four asynchronous/synchronous serial channels (asclin) with hardware lin support (v1.3, v2.0, v2.1 and j2602) up to 50 mbaud ? six queued spi interf ace channels (qspi) with master and slave capabilit y upto 50 mbit/s ? high speed serial link (hssl) for serial in ter-processor communication up to 320mbit/s ? two serial micro second bus interfaces (msc) for serial port expansion to external power devices ? two multican+ module with 6 can nodes and 384 free assignable messageobjects for high efficiency data handling via fifo buffering and gateway data transfer ? 15 single edge nibble transmission (sent) channels for connection to sensors ? up to two flexray tm module with 2 channels (e-ray) supporting v2.1 ? one generic timer module (gtm) providing a powerful se t of digital signal filteringand timer functionality to realize autonomous and complex input/output management ? one capture / compare 6 module (two kernels ccu60 and ccu61) tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step summary of features data sheet 1-2 v 1.1 2015-05 ? one general purpose 12 timer unit (gpt120) ? five channel peripheral sensor interface conforming to v1.3 (psi5) ? peripheral sensor interface with serial phy (psi5-s) ? inter-integrated circuit bus interface (i2c) conforming to v2.1 ? optional ieee802.3 ethernet mac wit h rmii and mii interfaces (eth) ? versatile successive approximation adc (vadc) ? cluster of 11 independent adc kernels ? input voltage range from 0 v to 5.5v (adc supply) ? delta-sigma adc (dsadc) ? ten channels ? digital programmable i/o ports ? on-chip debug support for ocds le vel 1 (cpus , dma, on chip buses) ? dedicated emulation device chip available (ed) ? multi-core debugging, real time tracing, and calibration ? aurora gigabit trace port (agbt) on some variants (see below) ? four/five wire jtag (ieee 1149.1) or dap (device access port) interface ? power management system and on-chip regulators ? clock generation unit with system pll and flexray pll ? embedded voltage regulator ordering information the ordering code for infineon microcontrollers provides an exact reference to the required product. this ordering code identifies: ? the derivative itself, i.e. its function set, the temperature range, and the supply voltage ? the package and the type of delivery. for the available ordering codes for the tc290 / TC297 / tc298 / tc299 please refer to the ?aurix tc29x microcontrollers variant overview? , which summarizes all available variants. table 1-1 overview of tc29x functions feature cpu core type tc1.6p p cores / checker cores 3 / 1 max. freq. 300 mhz fpu yes program flash size 8 mbyte data flash size 768 kbyte cache instruction 16/ 32 / 32 kbyte data 8 kbyte tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step summary of features data sheet 1-3 v 1.1 2015-05 sram size tc1.6p (dpsr/pspr) 120 kbyte / 32 kbyte 1) 2) 240 kbyte / 32 kbyte 240 kbyte / 32 kbyte size lmu 32 kbyte dma channels 128 adc channels 72 + 12 converter 11 dsadc channels 10 gtm tim 6 tom 5 atom / mcs 9 / 6 cmu / icm 1 / 1 psm 2 tbu 1 spe 4 cmp / mon 1 / 1 brc / dpll 1 / 1 timer gpt12 1 ccu6 2 stm modules 3 flexray modules 2 channels 4 can nodes 6 message objects 384 qspi channels 6 asclin interfaces 4 i2c interfaces 2 sent modules 15 psi5 channels 5 psi5-s modules 1 hssl channels 1 msc channels 3 ethernet channels 1 asil level up to asil-d fce modules 1 safety support smu 1 iom 1 table 1-1 overview of tc29x functions feature tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step summary of features data sheet 1-4 v 1.1 2015-05 adas yes embedded voltage regulator dcdc from 5 v/ 3.3 v to 1.3 v yes embedded voltage regulator ldo from 5 v / 3.3 v to 1.3 v yes embedded voltage regulator ldo from 5 v to 3.3 v yes low power features standby ram yes packages type lf-bga-292-6 / pg-bga-416-26 / pg-lfbga-516-5 i/o type 5 v cmos / 3.3 v cmos / lvds t ambient range -40 ... + 125c / + 150c / + 170c 1) address range starts at lowest address defined in the user?s manual. for reference see the memory maps chapter of the user?s manual. 2) to ensure the processor cores are provided with a consta nt stream of instructions t he instruction fetch units will speculatively fetch instructions from t he up to 64 bytes ahead of the current pc. if the current pc is within 64 bytes of the top of an in struction memory the instruction fetch unit may attempt to speculatively fetch instruction from be yond the physical range. this may then lead to error conditions and alarms being triggered by the bus and memory systems. it is therefore recommended that the upper 64 bytes of any memory be unused for instruction storage. table 1-1 overview of tc29x functions feature tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitions data sheet 2-5 v 1.1 2015-05 2 package and pinning definitions this chapter gives a pinning of the different pa ckages of the tc290 / TC297 / tc298 / tc299. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-6 v 1.1 2015-05 2.1 tc299x pin definition and functions: bga516 figure 2-1 is showing the tc299x logic symbol for the package variant: bga516. figure 2-1 tc299x logic symbol fo r the package variant bga516. 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 ak vss vflexe p30.15 p30.13 p30.11 p30.9 p30.7 p30.5 p30.3 p30.1 vflexe p31.15 p31.13 p31.11 p31.9 p31.7 p31.5 p31.3 p31.1 vflexe vss vddm vssm an48 aj vext vss p30.14 p30.12 p30.10 p30.8 p30.6 p30.4 p30.2 p30.0 vgate3p p31.14 p31.12 p31.10 p31.8 p31.6 p31.4 p31.2 p31.0 vflexe vss vddm vssm an49 ah vebu vext ag p25.0 p26.0 af p25.1 p25.2 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 ae p25.3 p25.4 ae vss p32.3 p32.2 p32.0 p33.13 p33.11 p33.9 p33.7 p33.5 p33.3 p33.1 an5 an10 vagnd1 varef1 vddm vssm an20 an21 ad p25.5 p25.7 ad vext vss p32.4 vgate1p p33.12 p33.10 p33.8 p33.6 p33.4 p33.2 p33.0 an2 an8 an11 an13 an16 an18 an19 an24 ac p25.9 p25.8 ac p23.0 vext 22 21 20 19 18 17 16 15 14 13 12 11 10 9 an2 6 ab p25.11 p25.10 ab p23.2 p23.1 ab vss p32.7 p32.6 p33.15 p34.5 p34.3 p34.1 an1 an3 an7 an9 an14 an17 nc ab an2 8 aa p25.13 p25.12 aa p23.4 p23.3 aa p23.5 vss p32.5 p33.14 p34.4 p34.2 vevrsb an0 an4 an6 an12 an15 an22 an30 aa vagnd2 y p25.15 p25.14 y p22.2 p22.3 y p23.6 p23.7 19 18 17 16 15 14 13 12 an2 3 an3 1 y an3 5 w nc p25.6 w p22.0 p22.1 w p22.5 p22.4 w vd d vss vss (agbt tx0p) vss (agbt tx0n) vss vd d w an3 4 an3 2 w an3 7 v nc nc v vddp3 vdd v p22.7 p22.6 v vdd vss vss vss vss vdd v an3 8 an3 6 v an4 5 u p24.1 p24.0 u xtal 1 xtal 2 u p22.9 p22.8 u vss vss vss vss vss vss u an4 0 an4 1 u an4 7 t p24.3 p24.2 t vss trst t p22.11 p22.10 t vss (agbt err) vss vss vss vss vss vss vss (agbt clkn) t an4 2 an4 3 t p00.12 r p24.5 p24.4 r p21.4 p21.2 r p21.0 tms r nc (vddpsb ) vss vss vss vss vss vss vss (agbt clkp) r p00.10 p00.8 r p00.9 p p24.7 p24.6 p p21.5 p21.3 p p21.1 tck p vss vss vss vss vss vss p p01.7 p00.6 p p00.5 n p24.9 p24.8 n p20.0 p20.2 n p21.6 p21.7 n vdd vss vss vss vss vdd (vddsb) n p01.5 p01.6 n p00.3 m p24.11 p24.10 m p20.3 p20.1 m porst esr1 m vd d vss vss vss vss vd d (vddsb) m p01.3 p01.4 m p00.1 l p24.13 p24.12 l p20.8 p20.7 l p20.6 esr0 19 18 17 16 15 14 13 12 p02.10 p02.11 l p02.7 k p24.15 p24.14 k p20.11 p20.10 k p20.9 vss vddfl3 p15.5 p14.2 p12.0 p12.1 p11.0 p11.1 p11.7 p11.8 p11.13 vss p02.9 k p02.5 j vebu vebu j p20.13 p20.12 j vss vddfl3 p15.7 p15.8 p14.7 p14.9 p14.10 p11.4 p11.6 p11.5 p11.14 p11.15 vflex vss j p02.3 h vss vss h p20.14 p15.2 22 21 20 19 18 17 16 15 14 13 12 11 10 9 p02.1 g nc nc g p15.0 vss vddp3 p15.3 p14.0 p14.4 p14.3 p14.6 p13.0 p13.2 p11.3 p11.10 p11.12 p10.1 p10.4 p10.5 p10.8 vext vss f nc nc f vss vddp3 p15.1 p15.4 p15.6 p14.1 p14.5 p14.8 p13.1 p13.3 p11.2 p11.9 p11.11 p10.0 p10.3 p10.2 p10.6 p10.7 vext e nc nc 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 d nc nc c nc nc b vss vss vddp3 nc nc nc p15.10 p15.12 p15.14 nc nc p14.12 p14.14 nc p13.4 p13.6 nc p13.10 p13.12 p13.14 nc nc p10.9 p10.10 a vss vddp3 nc nc nc nc p15.11 p15.13 p15.15 nc p14.11 p14.13 p14.15 nc p13.5 p13.7 p13.9 p13.11 p13.13 p13.15 nc nc nc p10.11 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 top-view 6 54321 an 5 1 an 5 3 an 5 5 n c n c n c ak an 5 0 an 5 2 an 5 4 n c n c n c aj nc nc ah nc nc ag 6 an5 7 an56 af nc ae an5 8 an59 ae an2 5 ad an6 1 an60 ad an2 7 ac an6 2 an63 ac an2 9 ab an6 4 an65 ab varef2 aa an6 6 an67 aa an3 3 y an6 9 an68 y an3 9 w an7 1 an70 w an4 4 v nc nc v an4 6 u p00.14 p00.15 u p00.11 t p00.13 nc t p00.7 r nc nc r p00.4 p p01.14 p01.15 p p00.2 n p01.12 p01.13 n p00.0 m p01.10 p01.11 m p02.8 l p01.9 p01.8 l p02.6 k p01.2 p01.1 k p02.4 j p01.0 nc j p02.2 h nc nc h p02.0 g p02.14 p02.15 g nc f p02.12 p02.13 f 6 nc nc e nc nc d nc nc c n c p1 0 . 1 4 nc vext vss n c b p10.13 p10.15 nc nc vext nc a 6 54321 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-7 v 1.1 2015-05 2.1.1 tc299x bga516 package va riant pin configuration table 2-1 port 00 functions pin symbol ctrl type function m6 p00.0 i mp / pu1 / vext general-purpose input tin9 gtm input ctrapa ccu61 input t12hre ccu60 input inj00 msc0 input cifd9 cif input p00.0 o0 general-purpose output tout9 o1 gtm output asclk3 o2 asclin3 output atx3 o3 asclin3 output ? o4 reserved txdcan1 o5 can node 1 output ? o6 reserved cout63 o7 ccu60 output ethmdioa hwou t eth input/output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-8 v 1.1 2015-05 m7 p00.1 i lp / pu1 / vext general-purpose input tin10 gtm input arx3e asclin3 input rxdcan1d can node 1 input psirx0a psi5 input sent0b sent input cc60inb ccu60 input cc60ina ccu61 input dscin5a dsadc channel 5 input ds5na dsadc positive analog input of channel channel 5, pin a dscin7b dsadc channel 7 input vadcg7.5 vadc analog input channel 5 of group 7 cifd10 cif input p00.1 o0 general-purpose output tout10 o1 gtm output atx3 o2 asclin3 output ? o3 reserved dscout5 o4 dsadc channel 5 output dscout7 o5 dsadc channel 7 output spc0 o6 sent output cc60 o7 ccu61 output n6 p00.2 i lp / pu1 / vext general-purpose input tin11 gtm input sent1b sent input dsdin5a dsadc channel 5 input dsdin7b dsadc channel 7 input ds5pa dsadc negative analog input of channel 5, pin a vadcg7.4 vadc analog input channel 4 of group 7 cifd11 cif input p00.2 o0 general-purpose output tout11 o1 gtm output asclk3 o2 asclin3 output txdcanr1 o3 can node 1 output (multicanr+) psitx0 o4 psi5 output txdcan3 o5 can node 3 output slso34 o6 qspi3 output cout60 o7 ccu61 output table 2-1 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-9 v 1.1 2015-05 n7 p00.3 i lp / pu1 / vext general-purpose input tin12 gtm input rxdcan3a can node 3 input rxdcanr1a can node 1 input (multicanr+) psirx1a psi5 input psisrxa psi5-s input sent2b sent input cc61inb ccu60 input cc61ina ccu61 input dscin3a dsadc channel 3 input vadcg7.3 vadc analog input channel 3 of group 7 dsitr5f dsadc channel 5 input cifd12 cif input p00.3 o0 general-purpose output tout12 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved dscout3 o4 dsadc channel 3 output ? o5 reserved spc2 o6 sent output cc61 o7 ccu61 output p6 p00.4 i lp / pu1 / vext general-purpose input tin13 gtm input req7 scu input sent3b sent input dsdin3a dsadc channel 3 input dssgna dsadc channel input vadcg7.2 vadc analog input channel 2 of group 7 (md) cifd13 cif input p00.4 o0 general-purpose output tout13 o1 gtm output psistx o2 psi5-s output ? o3 reserved psitx1 o4 psi5 output vadcg4bfl0 o5 vadc output spc3 o6 sent output cout61 o7 ccu61 output table 2-1 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-10 v 1.1 2015-05 p7 p00.5 i lp / pu1 / vext general-purpose input tin14 gtm input psirx2a psi5 input sent4b sent input cc62inb ccu60 input cc62ina ccu61 input dscin2a dsadc channel 2 input vadcg7.1 vadc analog input channel 1 of group 7 (md) cifd14 cif input p00.5 o0 general-purpose output tout14 o1 gtm output dscgpwmn o2 dsadc output slso33 o3 qspi3 output dscout2 o4 dsadc channel 2 output vadcg4bfl1 o5 vadc output spc4 o6 sent output cc62 o7 ccu61 output p9 p00.6 i lp / pu1 / vext general-purpose input tin15 gtm input sent5b sent input dsdin2a dsadc channel 2 input a vadcg7.0 vadc analog input channel 0 of group 7 (with pull down diagnostics) dsitr4f dsadc channel 4 input f cifd15 cif input p00.6 o0 general-purpose output tout15 o1 gtm output dscgpwmp o2 dsadc output vadcg4bfl2 o3 vadc output psitx2 o4 psi5 output vadcemux10 o5 vadc output spc5 o6 sent output cout62 o7 ccu61 output table 2-1 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-11 v 1.1 2015-05 r6 p00.7 i lp / pu1 / vext general-purpose input tin16 gtm input sent6b sent input cc60inc ccu61 input ccpos0a ccu61 input t12hrb ccu60 input t2ina gpt120 input dscin4a dsadc channel 4 input a ds4na dsadc negative analog input channel 4, pin a vadcg6.5 vadc analog input channel 5 of group 6 cifclk cif input p00.7 o0 general-purpose output tout16 o1 gtm output ? o2 reserved vadcg4bfl3 o3 vadc output dscout4 o4 dsadc channel 4 output vadcemux11 o5 vadc output spc6 o6 sent output cc60 o7 ccu61 output r9 p00.8 i lp / pu1 / vext general-purpose input tin17 gtm input sent7b sent input cc61inc ccu61 input ccpos1a ccu61 input t13hrb ccu60 input t2euda gpt120 input dsdin4a dsadc channel 4 input a ds4pa dsadc positive analog input of channel 4, pin a vadcg6.4 vadc analog input channel 4 of group 6 cifvsnc cif input p00.8 o0 general-purpose output tout17 o1 gtm output slso36 o2 qspi3 output ? o3 reserved ? o4 reserved vadcemux12 o5 vadc output spc7 o6 sent output cc61 o7 ccu61 output table 2-1 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-12 v 1.1 2015-05 r7 p00.9 i lp / pu1 / vext general-purpose input tin18 gtm input sent8b sent input cc62inc ccu61 input ccpos2a ccu61 input t13hrc ccu60 input t12hrc ccu60 input t4euda gpt120 input dscin1a dsadc channel 1 input a vadcg6.3 vadc analog input channel 3 of group 6 dsitr3f dsadc channel 3 input f cifhsnc cif input p00.9 o0 general-purpose output tout18 o1 gtm output slso37 o2 qspi3 output arts3 o3 asclin3 output dscout1 o4 dsadc channel 1 output ? o5 reserved spc8 o6 sent output cc62 o7 ccu61 output r10 p00.10 i lp / pu1 / vext general-purpose input tin19 gtm input sent9b sent input dsdin1a dsadc channel 1 input a vadcg6.2 vadc analog input channel 2 of group 6 (md) p00.10 o0 general-purpose output tout19 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved spc9 o6 sent output cout63 o7 ccu61 output table 2-1 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-13 v 1.1 2015-05 t6 p00.11 i lp / pu1 / vext general-purpose input tin20 gtm input ctrapa ccu60 input t12hre ccu61 input dscin0a dsadc channel 0 input a vadcg6.1 vadc analog input channel 1 of group 6 (md) p00.11 o0 general-purpose output tout20 o1 gtm output ? o2 reserved ? o3 reserved dscout0 o4 dsadc channel 0 output ? o5 reserved ? o6 reserved ? o7 reserved t7 p00.12 i lp / pu1 / vext general-purpose input tin21 gtm input acts3a asclin3 input dsdin0a dsadc channel 0 input a vadcg6.0 vadc analog input channel 0 of group 6 p00.12 o0 general-purpose output tout21 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cout63 o7 ccu61 output t2 p00.13 i mp+ / pu1 / vext general-purpose input tin167 gtm input dsdin6a dsadc channel 6 input a p00.13 o0 general-purpose output tout167 o1 gtm output ? o2 reserved ? o3 reserved extclk1 o4 scu output ? o5 reserved ? o6 reserved ? o7 reserved table 2-1 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-14 v 1.1 2015-05 u2 p00.14 i lp / pu1 / vext general-purpose input tin166 gtm input dscin6a dsadc channel 6 input a p00.14 o0 general-purpose output tout166 o1 gtm output ? o2 reserved ? o3 reserved dscout6 o4 dsadc channel 6 output ? o5 reserved ? o6 reserved ? o7 reserved u1 p00.15 i mp+ / pu1 / vext general-purpose input tin168 gtm input dsitr6f dsadc channel 6 input f p00.15 o0 general-purpose output tout168 o1 gtm output ? o2 reserved ? o3 reserved extclk0 o4 scu output ? o5 reserved ? o6 reserved ? o7 reserved table 2-2 port 01 functions pin symbol ctrl type function j2 p01.0 i lp / pu1 / vext general-purpose input tin155 gtm input dsitr6e dsadc channel 6 input e rxdcan3f can node 3 input rxdcanr1e can node 1 input (multicanr+) p01.0 o0 general-purpose output tout155 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-1 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-15 v 1.1 2015-05 k1 p01.1 i lp / pu1 / vext general-purpose input tin159 gtm input dsitr8e dsadc channel 8 input e rxd1a1 eray1 input sent10b sent input p01.1 o0 general-purpose output tout159 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved k2 p01.2 i lp / pu1 / vext general-purpose input tin156 gtm input dscin7a dsadc channel 7 input a p01.2 o0 general-purpose output tout156 o1 gtm output ? o2 reserved txdcan3 o3 can node 3 output ? o4 reserved txdcanr1 o5 can node 1 output (multicanr+) dscout7 o6 dsadc channel 7 output ? o7 reserved m10 p01.3 i lp / pu1 / vext general-purpose input tin111 gtm input slsi3b qspi3 input dsitr7f dsadc channel 7 input f p01.3 o0 general-purpose output tout111 o1 gtm output ? o2 reserved ? o3 reserved slso39 o4 qspi3 output txdcan1 o5 can node 1 output ? o6 reserved ? o7 reserved table 2-2 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-16 v 1.1 2015-05 m9 p01.4 i lp / pu1 / vext general-purpose input tin112 gtm input rxdcan1c can node 1 input dsitr7e dsadc channel 7 input e p01.4 o0 general-purpose output tout112 o1 gtm output ? o2 reserved ? o3 reserved slso310 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved n10 p01.5 i lp / pu1 / vext general-purpose input tin113 gtm input mrst3c qspi3 input dscin8a dsadc channel 8 input a p01.5 o0 general-purpose output tout113 o1 gtm output ? o2 reserved ? o3 reserved mrst3 o4 qspi3 output ? o5 reserved dscout8 o6 dsadc channel 8 output ? o7 reserved n9 p01.6 i mp / pu1 / vext general-purpose input tin114 gtm input mtsr3c qspi3 input dsdin8a dsadc channel 8 input a p01.6 o0 general-purpose output tout114 o1 gtm output ? o2 reserved ? o3 reserved mtsr3 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-2 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-17 v 1.1 2015-05 p10 p01.7 i mp / pu1 / vext general-purpose input tin115 gtm input sclk3c qspi3 input dsitr8f dsadc channel 8 input f p01.7 o0 general-purpose output tout115 o1 gtm output ? o2 reserved ? o3 reserved sclk3 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved l1 p01.8 i lp / pu1 / vext general-purpose input tin162 gtm input dsdin9a dsadc channel 9 input a sent12b sent input arx0c asclin0 input rxdcan0f can node 0 input rxdcanr0e can node 0 input (multicanr+) rxd1b1 eray1 input p01.8 o0 general-purpose output tout162 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-2 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-18 v 1.1 2015-05 l2 p01.9 i lp / pu1 / vext general-purpose input tin160 gtm input dscin9a dsadc channel 9 input a sent11b sent input p01.9 o0 general-purpose output tout160 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved dscout9 o6 dsadc channel 9 output ? o7 reserved m2 p01.10 i lp / pu1 / vext general-purpose input tin163 gtm input dsitr9f dsadc channel 9 input f sent13b sent input p01.10 o0 general-purpose output tout163 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved m1 p01.11 i lp / pu1 / vext general-purpose input tin165 gtm input dsitr9e dsadc channel 9 input e sent14b sent input p01.11 o0 general-purpose output tout165 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-2 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-19 v 1.1 2015-05 n2 p01.12 i mp+ / pu1 / vext general-purpose input tin158 gtm input p01.12 o0 general-purpose output tout158 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved txd1a o6 eray1 output ? o7 reserved n1 p01.13 i mp+ / pu1 / vext general-purpose input tin161 gtm input p01.13 o0 general-purpose output tout161 o1 gtm output atx0 o2 asclin0 output ? o3 reserved txdcan0 o4 can node 0 output txdcanr0 o5 can node 0 output (multicanr+) txd1b o6 eray1 output ? o7 reserved p2 p01.14 i mp+ / pu1 / vext general-purpose input tin164 gtm input p01.14 o0 general-purpose output tout164 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved txen1a o6 eray1 output ? o7 reserved table 2-2 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-20 v 1.1 2015-05 p1 p01.15 i lp / pu1 / vext general-purpose input tin157 gtm input dsdin7a dsadc channel 7 input a p01.15 o0 general-purpose output tout157 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-3 port 02 functions pin symbol ctrl type function g6 p02.0 i mp+ / pu1 / vext general-purpose input tin0 gtm input req6 scu input arx2g asclin2 input cc60ina ccu60 input cc60inb ccu61 input cifd0 cif input p02.0 o0 general-purpose output tout0 o1 gtm output atx2 o2 asclin2 output slso31 o3 qspi3 output dscgpwmn o4 dsadc output txdcan0 o5 can node 0 output txd0a o6 eray0 output cc60 o7 ccu60 output table 2-2 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-21 v 1.1 2015-05 h7 p02.1 i lp / pu1 / vext general-purpose input tin1 gtm input req14 scu input arx2b asclin2 input rxdcan0a can node 0 input rxd0a2 eray0 input cifd1 cif input p02.1 o0 general-purpose output tout1 o1 gtm output slso47 o2 qspi4 output slso32 o3 qspi3 output dscgpwmp o4 dsadc output ? o5 reserved ? o6 reserved cout60 o7 ccu60 output h6 p02.2 i mp+ / pu1 / vext general-purpose input tin2 gtm input cc61ina ccu60 input cc61inb ccu61 input cifd2 cif input p02.2 o0 general-purpose output tout2 o1 gtm output atx1 o2 asclin1 output slso33 o3 qspi3 output psitx0 o4 psi5 output txdcan2 o5 can node 2 output txd0b o6 eray0 output cc61 o7 ccu60 output table 2-3 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-22 v 1.1 2015-05 j7 p02.3 i lp / pu1 / vext general-purpose input tin3 gtm input arx1g asclin1 input rxdcan2b can node 2 input rxd0b2 eray0 input psirx0b psi5 input dscin5b dsadc channel 5 input b sdi11 msc1 input cifd3 cif input p02.3 o0 general-purpose output tout3 o1 gtm output aslso2 o2 asclin2 output slso34 o3 qspi3 output dscout5 o4 dsadc channel 5 output ? o5 reserved ? o6 reserved cout61 o7 ccu60 output j6 p02.4 i mp+ / pu1 / vext general-purpose input tin4 gtm input slsi3a qspi3 input ectt1 ttcan input rxdcan0d can node 0 input cc62ina ccu60 input cc62inb ccu61 input dsdin5b dsadc channel 5 input b sda0a i2c0 input cifd4 cif input p02.4 o0 general-purpose output tout4 o1 gtm output asclk2 o2 asclin2 output slso30 o3 qspi3 output psisclk o4 psi5-s output sda0 o5 i2c0 output txen0a o6 eray0 output cc62 o7 ccu60 output table 2-3 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-23 v 1.1 2015-05 k7 p02.5 i mp+ / pu1 / vext general-purpose input tin5 gtm input mrst3a qspi3 input ectt2 ttcan input psirx1b psi5 input psisrxb psi5-s input sent3c sent input dscin4b dsadc channel 4 input b scl0a i2c0 input cifd5 cif input p02.5 o0 general-purpose output tout5 o1 gtm output txdcan0 o2 can node 0 output mrst3 o3 qspi3 output dscout4 o4 dsadc channel 4 output scl0 o5 i2c0 output txen0b o6 eray0 output cout62 o7 ccu60 output k6 p02.6 i mp / pu1 / vext general-purpose input tin6 gtm input mtsr3a qspi3 input sent2c sent input cc60inc ccu60 input ccpos0a ccu60 input t12hrb ccu61 input t3ina gpt120 input cifd6 cif input dsdin4b dsadc channel 4 input b dsitr5e dsadc channel 5 input e p02.6 o0 general-purpose output tout6 o1 gtm output psistx o2 psi5-s output mtsr3 o3 qspi3 output psitx1 o4 psi5 output vadcemux00 o5 vadc output ? o6 reserved cc60 o7 ccu60 output table 2-3 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-24 v 1.1 2015-05 l7 p02.7 i mp / pu1 / vext general-purpose input tin7 gtm input sclk3a qspi3 input psirx2b psi5 input sent1c sent input cc61inc ccu60 input ccpos1a ccu60 input t13hrb ccu61 input t3euda gpt120 input cifd7 cif input dscin3b dsadc channel 3 input b dsitr4e dsadc channel 4 input e p02.7 o0 general-purpose output tout7 o1 gtm output ? o2 reserved sclk3 o3 qspi3 output dscout3 o4 dsadc channel 3 output vadcemux01 o5 vadc output spc1 o6 sent output cc61 o7 ccu60 output table 2-3 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-25 v 1.1 2015-05 l6 p02.8 i lp / pu1 / vext general-purpose input tin8 gtm input sent0c sent input cc62inc ccu60 input ccpos2a ccu60 input t12hrc ccu61 input t13hrc ccu61 input t4ina gpt120 input cifd8 cif input dsdin3b dsadc channel 3 input b dsitr3e dsadc channel 3 input e p02.8 o0 general-purpose output tout8 o1 gtm output slso35 o2 qspi3 output ? o3 reserved psitx2 o4 psi5 output vadcemux02 o5 vadc output ethmdc o6 eth output cc62 o7 ccu60 output k9 p02.9 i lp / pu1 / vext general-purpose input tin116 gtm input p02.9 o0 general-purpose output tout116 o1 gtm output atx2 o2 asclin2 output ? o3 reserved ? o4 reserved txdcan1 o5 can node 1 output ? o6 reserved ? o7 reserved table 2-3 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-26 v 1.1 2015-05 l10 p02.10 i lp / pu1 / vext general-purpose input tin117 gtm input arx2c asclin2 input rxdcan1e can node 1 input p02.10 o0 general-purpose output tout117 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved l9 p02.11 i lp / pu1 / vext general-purpose input tin118 gtm input p02.11 o0 general-purpose output tout118 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved f2 p02.12 i lp / pu1 / vext general-purpose input tin151 gtm input p02.12 o0 general-purpose output tout151 o1 gtm output slso35 o2 qspi3 output slso44 o3 qspi4 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-3 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-27 v 1.1 2015-05 f1 p02.13 i lp / pu1 / vext general-purpose input tin153 gtm input p02.13 o0 general-purpose output tout153 o1 gtm output slso37 o2 qspi3 output slso46 o3 qspi4 output txdcan0 o4 can node 0 output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved ? o7 reserved g2 p02.14 i lp / pu1 / vext general-purpose input tin154 gtm input rxdcan0h can node 0 input rxdcanr0d can node 0 input (multicanr+) p02.14 o0 general-purpose output tout154 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved g1 p02.15 i mp+ / pu1 / vext general-purpose input tin152 gtm input p02.15 o0 general-purpose output tout152 o1 gtm output slso36 o2 qspi3 output slso45 o3 qspi4 output ? o4 reserved ? o5 reserved txen1b o6 eray1 output ? o7 reserved table 2-3 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-28 v 1.1 2015-05 table 2-4 port 10 functions pin symbol ctrl type function f12 p10.0 i lp / pu1 / vext general-purpose input tin102 gtm input t6eudb gpt120 input p10.0 o0 general-purpose output tout102 o1 gtm output ? o2 reserved slso110 o3 qspi1 output ? o4 reserved vadcg6bfl0 o5 vadc output ? o6 reserved ? o7 reserved g12 p10.1 i mp+ / pu1 / vext general-purpose input tin103 gtm input mrst1a qspi1 input t5eudb gpt120 input p10.1 o0 general-purpose output tout103 o1 gtm output mtsr1 o2 qspi1 output mrst1 o3 qspi1 output en01 o4 msc0 output vadcg6bfl1 o5 vadc output end03 o6 msc0 output ? o7 reserved f10 p10.2 i mp / pu1 / vext general-purpose input tin104 gtm input sclk1a qspi1 input t6inb gpt120 input req2 scu input rxdcan2e can node 2 input sdi01 msc0 input p10.2 o0 general-purpose output tout104 o1 gtm output ? o2 reserved sclk1 o3 qspi1 output en00 o4 msc0 output vadcg6bfl2 o5 vadc output end02 o6 msc0 output ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-29 v 1.1 2015-05 f11 p10.3 i mp / pu1 / vext general-purpose input tin105 gtm input mtsr1a qspi1 input req3 scu input t5inb gpt120 input p10.3 o0 general-purpose output tout105 o1 gtm output vadcg6bfl3 o2 vadc output mtsr1 o3 qspi1 output en00 o4 msc0 output end02 o5 msc0 output txdcan2 o6 can node 2 output ? o7 reserved g11 p10.4 i mp+ / pu1 / vext general-purpose input tin106 gtm input mtsr1c qspi1 input ccpos0c ccu60 input t3inb gpt120 input p10.4 o0 general-purpose output tout106 o1 gtm output ? o2 reserved slso18 o3 qspi1 output mtsr1 o4 qspi1 output en00 o5 msc0 output end02 o6 msc0 output ? o7 reserved table 2-4 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-30 v 1.1 2015-05 g10 p10.5 i lp / pu1 / vext general-purpose input tin107 gtm input hwcfg4 scu input rxdcanr0a can node 0 input (multicanr+) inj01 msc0 input p10.5 o0 general-purpose output tout107 o1 gtm output atx2 o2 asclin2 output slso38 o3 qspi3 output slso19 o4 qspi1 output t6out o5 gpt120 output aslso2 o6 asclin2 output psitx3 o7 psi5 output f9 p10.6 i lp / pu1 / vext general-purpose input tin108 gtm input arx2d asclin2 input mtsr3b qspi3 input psirx3c psi5 input hwcfg5 scu input p10.6 o0 general-purpose output tout108 o1 gtm output asclk2 o2 asclin2 output mtsr3 o3 qspi3 output t3out o4 gpt120 output txdcanr0 o5 can node 0 output (multicanr+) mrst1 o6 qspi1 output vadcg7bfl0 o7 vadc output table 2-4 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-31 v 1.1 2015-05 f8 p10.7 i lp / pu1 / vext general-purpose input tin109 gtm input acts2a asclin2 input mrst3b qspi3 input req4 scu input ccpos1c ccu60 input t3eudb gpt120 input p10.7 o0 general-purpose output tout109 o1 gtm output ? o2 reserved mrst3 o3 qspi3 output vadcg7bfl1 o4 vadc output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved ? o7 reserved g9 p10.8 i lp / pu1 / vext general-purpose input tin110 gtm input sclk3b qspi3 input req5 scu input ccpos2c ccu60 input t4inb gpt120 input rxdcanr0b can node 0 input (multicanr+) p10.8 o0 general-purpose output tout110 o1 gtm output arts2 o2 asclin2 output sclk3 o3 qspi3 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-4 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-32 v 1.1 2015-05 b8 p10.9 i lp / pu1 / vext general-purpose input tin265 gtm input sent10c sent input p10.9 o0 general-purpose output tout265 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved b7 p10.10 i lp / pu1 / vext general-purpose input tin266 gtm input sent11c sent input p10.10 o0 general-purpose output tout266 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a7 p10.11 i lp / pu1 / vext general-purpose input tin269 gtm input sent14c sent input p10.11 o0 general-purpose output tout269 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-4 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-33 v 1.1 2015-05 a6 p10.13 i lp / pu1 / vext general-purpose input tin268 gtm input sent13c sent input p10.13 o0 general-purpose output tout268 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved b5 p10.14 i lp / pu1 / vext general-purpose input tin267 gtm input sent12c sent input p10.14 o0 general-purpose output tout267 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a5 p10.15 i lp / pu1 / vext general-purpose input tin270 gtm input p10.15 o0 general-purpose output tout270 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-4 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-34 v 1.1 2015-05 table 2-5 port 11 functions pin symbol ctrl type function k15 p11.0 i mp+ / pu1 / vflex general-purpose input tin119 gtm input arx3b asclin3 input p11.0 o0 general-purpose output tout119 o1 gtm output atx3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved ethtxd3 o6 eth output ? o7 reserved k14 p11.1 i mp+ / pu1 / vflex general-purpose input tin120 gtm input p11.1 o0 general-purpose output tout120 o1 gtm output asclk3 o2 asclin3 output atx3 o3 asclin3 output ? o4 reserved ? o5 reserved ethtxd2 o6 eth output ? o7 reserved f15 p11.2 i mpr/ pu1 / vflex general-purpose input tin95 gtm input p11.2 o0 general-purpose output tout95 o1 gtm output end03 o2 msc0 output slso05 o3 qspi0 output slso15 o4 qspi1 output en01 o5 msc0 output ethtxd1 o6 eth output cout63 o7 ccu60 output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-35 v 1.1 2015-05 g15 p11.3 i mpr / pu1 / vflex general-purpose input tin96 gtm input mrst1b qspi1 input sdi03 msc0 input p11.3 o0 general-purpose output tout96 o1 gtm output ? o2 reserved mrst1 o3 qspi1 output txd0a o4 eray0 output ? o5 reserved ethtxd0 o6 eth output cout62 o7 ccu60 output j15 p11.4 i mp+ / pu1 / vflex general-purpose input tin121 gtm input ethrxclkb eth input p11.4 o0 general-purpose output tout121 o1 gtm output asclk3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved ethtxer o6 eth output ? o7 reserved j13 p11.5 i lp / pu1 / vflex general-purpose input tin122 gtm input ethtxclka eth input p11.5 o0 general-purpose output tout122 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-5 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-36 v 1.1 2015-05 j14 p11.6 i mpr / pu1 / vflex general-purpose input tin97 gtm input sclk1b qspi1 input p11.6 o0 general-purpose output tout97 o1 gtm output txen0b o2 eray0 output sclk1 o3 qspi1 output txen0a o4 eray0 output fclp0 o5 msc0 output ethtxen o6 eth output cout61 o7 ccu60 output k13 p11.7 i lp / pu1 / vflex general-purpose input tin123 gtm input ethrxd3 eth input p11.7 o0 general-purpose output tout123 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved k12 p11.8 i lp / pu1 / vflex general-purpose input tin124 gtm input ethrxd2 eth input p11.8 o0 general-purpose output tout124 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-5 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-37 v 1.1 2015-05 f14 p11.9 i mp+ / pu1 / vflex general-purpose input tin98 gtm input mtsr1b qspi1 input rxd0a1 eray0 input ethrxd1 eth input p11.9 o0 general-purpose output tout98 o1 gtm output ? o2 reserved mtsr1 o3 qspi1 output ? o4 reserved sop0 o5 msc0 output ? o6 reserved cout60 o7 ccu60 output g14 p11.10 i lp / pu1 / vflex general-purpose input tin99 gtm input req12 scu input arx1e asclin1 input slsi1a qspi1 input rxdcan3d can node 3 input rxd0b1 eray0 input ethrxd0 eth input sdi00 msc0 input p11.10 o0 general-purpose output tout99 o1 gtm output ? o2 reserved slso03 o3 qspi0 output slso13 o4 qspi1 output ? o5 reserved ? o6 reserved cc62 o7 ccu60 output table 2-5 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-38 v 1.1 2015-05 f13 p11.11 i mp+ / pu1 / vflex general-purpose input tin100 gtm input ethcrsdva eth input ethrxdva eth input ethcrsb eth input p11.11 o0 general-purpose output tout100 o1 gtm output end02 o2 msc0 output slso04 o3 qspi0 output slso14 o4 qspi1 output en00 o5 msc0 output txen0b o6 eray0 output cc61 o7 ccu60 output g13 p11.12 i mpr / pu1 / vflex general-purpose input tin101 gtm input ethrefclk eth input ethtxclkb eth input (not for productive purposes) ethrxclka eth input (not for productive purposes) p11.12 o0 general-purpose output tout101 o1 gtm output atx1 o2 asclin1 output gtmclk2 o3 gtm output txd0b o4 eray0 output txdcan3 o5 can node 3 output extclk1 o6 scu output cc60 o7 ccu60 output table 2-5 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-39 v 1.1 2015-05 k11 p11.13 i lp / pu1 / vflex general-purpose input tin125 gtm input ethrxera eth input sda1a i2c1 input p11.13 o0 general-purpose output tout125 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sda1 o6 i2c1 output ? o7 reserved j12 p11.14 i lp / pu1 / vflex general-purpose input tin126 gtm input ethcrsdvb eth input ethrxdvb eth input ethcrsa eth input scl1a i2c1 input p11.14 o0 general-purpose output tout126 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved scl1 o6 i2c1 output ? o7 reserved j11 p11.15 i lp / pu1 / vflex general-purpose input tin127 gtm input ethcol eth input p11.15 o0 general-purpose output tout127 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-5 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-40 v 1.1 2015-05 table 2-6 port 12 functions pin symbol ctrl type function k17 p12.0 i lp / pu1 / vflex general-purpose input tin128 gtm input ethrxclkc eth input rxdcan0c can node 0 input p12.0 o0 general-purpose output tout128 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdc o6 eth output ? o7 reserved k16 p12.1 i lp / pu1 / vflex general-purpose input tin129 gtm input p12.1 o0 general-purpose output tout129 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved txdcan0 o5 can node 0 output ? o6 reserved ? o7 reserved ethmdioc hwou t eth input/output table 2-7 port 13 functions pin symbol ctrl type function g17 p13.0 i lvdsm_n / pu1 / vext general-purpose input tin91 gtm input p13.0 o0 general-purpose output tout91 o1 gtm output end03 o2 msc0 output sclk2n o3 qspi2 output (lvds) en01 o4 msc0 output fcln0 o5 msc0 output (lvds) fclnd0 o6 msc0 output (lvds) ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-41 v 1.1 2015-05 f17 p13.1 i lvdsm_p / pu1 / vext general-purpose input tin92 gtm input scl0b i2c0 input p13.1 o0 general-purpose output tout92 o1 gtm output ? o2 reserved sclk2p o3 qspi2 output (lvds) ? o4 reserved fclp0 o5 msc0 output (lvds) scl0 o6 i2c0 output ? o7 reserved g16 p13.2 i lvdsm_n / pu1 / vext general-purpose input tin93 gtm input capina gpt120 input sda0b i2c0 input p13.2 o0 general-purpose output tout93 o1 gtm output ? o2 reserved mtsr2n o3 qspi2 output (lvds) fclp0 o4 msc0 output son0 o5 msc0 output (lvds) sda0 o6 i2c0 output sond0 o7 msc0 output (lvds) f16 p13.3 i lvdsm_p / pu1 / vext general-purpose input tin94 gtm input p13.3 o0 general-purpose output tout94 o1 gtm output ? o2 reserved mtsr2p o3 qspi2 output (lvds) ? o4 reserved sop0 o5 msc0 output (lvds) ? o6 reserved ? o7 reserved table 2-7 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-42 v 1.1 2015-05 b16 p13.4 i lvdsm_n / pu1 / vext general-purpose input tin253 gtm input psirx4a psi5 input p13.4 o0 general-purpose output tout253 o1 gtm output end22 o2 msc2 output ? o3 reserved en20 o4 msc2 output fcln2 o5 msc2 output (lvds) fclnd2 o6 msc2 output (lvds) ? o7 reserved a16 p13.5 i lvdsm_p / pu1 / vext general-purpose input tin254 gtm input p13.5 o0 general-purpose output tout254 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved fclp2 o5 msc2 output (lvds) ? o6 reserved ? o7 reserved b15 p13.6 i lvdsm_n / pu1 / vext general-purpose input tin255 gtm input p13.6 o0 general-purpose output tout255 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved son2 o5 msc2 output (lvds) sond2 o6 msc2 output (lvds) ? o7 reserved table 2-7 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-43 v 1.1 2015-05 a15 p13.7 i lvdsm_p / pu1 / vext general-purpose input tin256 gtm input p13.7 o0 general-purpose output tout256 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved sop2 o5 msc2 output (lvds) ? o6 reserved ? o7 reserved a14 p13.9 i mp / pu1 / vext general-purpose input tin248 gtm input scl1b i2c1 input p13.9 o0 general-purpose output tout248 o1 gtm output atx3 o2 asclin3 output slso55 o3 qspi5 output ? o4 reserved txdcanr1 o5 can node 1 output (multicanr+) scl1 o6 i2c1 output ? o7 reserved b13 p13.10 i lp / pu1 / vext general-purpose input tin251 gtm input psirx3a psi5 input p13.10 o0 general-purpose output tout251 o1 gtm output atx0 o2 asclin0 output ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-7 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-44 v 1.1 2015-05 a13 p13.11 i lp / pu1 / vext general-purpose input tin250 gtm input arx0e asclin0 input p13.11 o0 general-purpose output tout250 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved psitx3 o5 psi5 output ? o6 reserved ? o7 reserved b12 p13.12 i lp / pu1 / vext general-purpose input tin249 gtm input arx3h asclin3 input rxdcanr1b can node 1 input (multicanr+) sda1b i2c1 input p13.12 o0 general-purpose output tout249 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sda1 o6 i2c1 output ? o7 reserved a12 p13.13 i lp / pu1 / vext general-purpose input tin262 gtm input psirx3b psi5 input inj20 msc2 input p13.13 o0 general-purpose output tout262 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-7 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-45 v 1.1 2015-05 b11 p13.14 i lp / pu1 / vext general-purpose input tin252 gtm input p13.14 o0 general-purpose output tout252 o1 gtm output ? o2 reserved slso54 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a11 p13.15 i lp / pu1 / vext general-purpose input tin264 gtm input p13.15 o0 general-purpose output tout264 o1 gtm output ? o2 reserved ? o3 reserved psitx3 o4 psi5 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-8 port 14 functions pin symbol ctrl type function g21 p14.0 i mp+ / pu1 / vext general-purpose input tin80 gtm input sent12d sent input p14.0 o0 general-purpose output tout80 o1 gtm output atx0 o2 asclin0 output recommended as boot loader pin txd0a o3 eray0 output txd0b o4 eray0 output txdcan1 o5 can node 1 output used for single pin dap (spd) function asclk0 o6 asclin0 output cout62 o7 ccu60 output table 2-7 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-46 v 1.1 2015-05 f20 p14.1 i mp / pu1 / vext general-purpose input tin81 gtm input req15 scu input sent13d sent input arx0a asclin0 input recommended as boot loader pin rxdcan1b can node 1 input used for single pin dap (spd) function rxd0a3 eray0 input rxd0b3 eray0 input evrwupa scu input p14.1 o0 general-purpose output tout81 o1 gtm output atx0 o2 asclin0 output recommended as boot loader pin. ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cout63 o7 ccu60 output k18 p14.2 i lp / pu1 / vext general-purpose input tin82 gtm input hwcfg2 evr13 scu input latched at cold power on reset to decide evr13 activation. p14.2 o0 general-purpose output tout82 o1 gtm output atx2 o2 asclin2 output slso21 o3 qspi2 output ? o4 reserved ? o5 reserved asclk2 o6 asclin2 output ? o7 reserved table 2-8 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-47 v 1.1 2015-05 g19 p14.3 i lp / pu1 / vext general-purpose input tin83 gtm input arx2a asclin2 input req10 scu input hwcfg3_bmi scu input sdi02 msc0 input p14.3 o0 general-purpose output tout83 o1 gtm output atx2 o2 asclin2 output slso23 o3 qspi2 output aslso1 o4 asclin1 output aslso3 o5 asclin3 output ? o6 reserved ? o7 reserved g20 p14.4 i lp / pu1 / vext general-purpose input tin84 gtm input hwcfg6 scu input latched at cold power on reset to decide default pad reset state (pu or highz). p14.4 o0 general-purpose output tout84 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-8 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-48 v 1.1 2015-05 f19 p14.5 i mp+ / pu1 / vext general-purpose input tin85 gtm input hwcfg1 evr33 scu input latched at cold power on reset to decide evr33 activation. p14.5 o0 general-purpose output tout85 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved txd0b o6 eray0 output txd1b o7 eray1 output g18 p14.6 i mp+ / pu1 / vext general-purpose input tin86 gtm input hwcfg0 dcldo scu input if evr13 active, latched at cold power on reset to decide between ldo and smps mode. p14.6 o0 general-purpose output tout86 o1 gtm output ? o2 reserved slso22 o3 qspi2 output ? o4 reserved ? o5 reserved txen0b o6 eray0 output txen1b o7 eray1 output j18 p14.7 i lp / pu1 / vext general-purpose input tin87 gtm input rxd0b0 eray0 input rxd1b0 eray1 input p14.7 o0 general-purpose output tout87 o1 gtm output arts0 o2 asclin0 output slso24 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-8 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-49 v 1.1 2015-05 f18 p14.8 i lp / pu1 / vext general-purpose input tin88 gtm input arx1d asclin1 input rxdcan2d can node 2 input rxd0a0 eray0 input rxd1a0 eray1 input p14.8 o0 general-purpose output tout88 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved j17 p14.9 i mp+ / pu1 / vext general-purpose input tin89 gtm input acts0a asclin0 input p14.9 o0 general-purpose output tout89 o1 gtm output end03 o2 msc0 output en01 o3 msc0 output ? o4 reserved txen0b o5 eray0 output txen0a o6 eray0 output txen1a o7 eray1 output j16 p14.10 i mp+ / pu1 / vext general-purpose input tin90 gtm input p14.10 o0 general-purpose output tout90 o1 gtm output end02 o2 msc0 output en00 o3 msc0 output atx1 o4 asclin1 output txdcan2 o5 can node 2 output txd0a o6 eray0 output txd1a o7 eray1 output table 2-8 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-50 v 1.1 2015-05 a20 p14.11 i lp / pu1 / vext general-purpose input tin258 gtm input p14.11 o0 general-purpose output tout258 o1 gtm output end20 o2 msc2 output psitx4 o3 psi5 output en22 o4 msc2 output sop2 o5 msc2 output ? o6 reserved ? o7 reserved b19 p14.12 i lp / pu1 / vext general-purpose input tin261 gtm input sdi20 msc2 input p14.12 o0 general-purpose output tout261 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a19 p14.13 i mp+ / pu1 / vext general-purpose input tin260 gtm input p14.13 o0 general-purpose output tout260 o1 gtm output end23 o2 msc2 output ? o3 reserved en21 o4 msc2 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-8 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-51 v 1.1 2015-05 b18 p14.14 i mp+ / pu1 / vext general-purpose input tin259 gtm input p14.14 o0 general-purpose output tout259 o1 gtm output end22 o2 msc2 output ? o3 reserved en20 o4 msc2 output ? o5 reserved ? o6 reserved ? o7 reserved a18 p14.15 i lp / pu1 / vext general-purpose input tin263 gtm input inj21 msc2 output p14.15 o0 general-purpose output tout263 o1 gtm output atx1 o2 asclin1 output ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-9 port 15 functions pin symbol ctrl type function g25 p15.0 i lp / pu1 / vext general-purpose input tin71 gtm input p15.0 o0 general-purpose output tout71 o1 gtm output atx1 o2 asclin1 output slso013 o3 qspi0 output ? o4 reserved txdcan2 o5 can node 2 output asclk1 o6 asclin1 output ? o7 reserved table 2-8 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-52 v 1.1 2015-05 f23 p15.1 i lp / pu1 / vext general-purpose input tin72 gtm input req16 scu input arx1a asclin1 input rxdcan2a can node 2 input slsi2b qspi2 input evrwupb scu input p15.1 o0 general-purpose output tout72 o1 gtm output atx1 o2 asclin1 output slso25 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved h24 p15.2 i mp / pu1 / vext general-purpose input tin73 gtm input slsi2a qspi2 input mrst2e qspi2 input sent10d sent input hsic2ina qspi2 input p15.2 o0 general-purpose output tout73 o1 gtm output atx0 o2 asclin0 output slso20 o3 qspi2 output ? o4 reserved txdcan1 o5 can node 1 output asclk0 o6 asclin0 output ? o7 reserved table 2-9 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-53 v 1.1 2015-05 g22 p15.3 i mp / pu1 / vext general-purpose input tin74 gtm input arx0b asclin0 input sclk2a qspi2 input rxdcan1a can node 1 input hsic2inb qspi2 input p15.3 o0 general-purpose output tout74 o1 gtm output atx0 o2 asclin0 output sclk2 o3 qspi2 output end03 o4 msc0 output en01 o5 msc0 output ? o6 reserved ? o7 reserved f22 p15.4 i mp / pu1 / vext general-purpose input tin75 gtm input mrst2a qspi2 input req0 scu input scl0c i2c0 input sent11d sent input p15.4 o0 general-purpose output tout75 o1 gtm output atx1 o2 asclin1 output mrst2 o3 qspi2 output ? o4 reserved ? o5 reserved scl0 o6 i2c0 output cc62 o7 ccu60 output table 2-9 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-54 v 1.1 2015-05 k19 p15.5 i mp / pu1 / vext general-purpose input tin76 gtm input arx1b asclin1 input mtsr2a qspi2 input req13 scu input sda0c i2c0 input p15.5 o0 general-purpose output tout76 o1 gtm output atx1 o2 asclin1 output mtsr2 o3 qspi2 output end02 o4 msc0 output en00 o5 msc0 output sda0 o6 i2c0 output cc61 o7 ccu60 output f21 p15.6 i mp / pu1 / vext general-purpose input tin77 gtm input mtsr2b qspi2 input p15.6 o0 general-purpose output tout77 o1 gtm output atx3 o2 asclin3 output mtsr2 o3 qspi2 output slso53 o4 qspi5 output sclk2 o5 qspi2 output asclk3 o6 asclin3 output cc60 o7 ccu60 output j20 p15.7 i mp / pu1 / vext general-purpose input tin78 gtm input arx3a asclin3 input mrst2b qspi2 input p15.7 o0 general-purpose output tout78 o1 gtm output atx3 o2 asclin3 output mrst2 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cout60 o7 ccu60 output table 2-9 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-55 v 1.1 2015-05 j19 p15.8 i mp / pu1 / vext general-purpose input tin79 gtm input sclk2b qspi2 input req1 scu input p15.8 o0 general-purpose output tout79 o1 gtm output ? o2 reserved sclk2 o3 qspi2 output ? o4 reserved ? o5 reserved asclk3 o6 asclin3 output cout61 o7 ccu60 output b24 p15.10 i lp / pu1 / vext general-purpose input tin242 gtm input mrst5a qspi5 input p15.10 o0 general-purpose output tout242 o1 gtm output ? o2 reserved mrst5 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a24 p15.11 i lp / pu1 / vext general-purpose input tin243 gtm input slsi5a qspi5 input p15.11 o0 general-purpose output tout243 o1 gtm output ? o2 reserved slso52 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-9 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-56 v 1.1 2015-05 b23 p15.12 i lp / pu1 / vext general-purpose input tin244 gtm input p15.12 o0 general-purpose output tout244 o1 gtm output ? o2 reserved slso51 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a23 p15.13 i lp / pu1 / vext general-purpose input tin245 gtm input p15.13 o0 general-purpose output tout245 o1 gtm output ? o2 reserved slso50 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved b22 p15.14 i mp / pu1 / vext general-purpose input tin246 gtm input mtsr5a qspi5 input p15.14 o0 general-purpose output tout246 o1 gtm output ? o2 reserved mtsr5 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-9 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-57 v 1.1 2015-05 a22 p15.15 i mp / pu1 / vext general-purpose input tin247 gtm input sclk5a qspi5 input p15.15 o0 general-purpose output tout247 o1 gtm output ? o2 reserved sclk5 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-10 port 20 functions pin symbol ctrl type function n25 p20.0 i mp / pu1 / vext general-purpose input tin59 gtm input rxdcan3c can node 3 input rxdcanr1c can node 1 input (multicanr+) t6euda gpt120 input req9 scu input sysclk hsct input tgi0 ocds input p20.0 o0 general-purpose output tout59 o1 gtm output atx3 o2 asclin3 output asclk3 o3 asclin3 output ? o4 reserved sysclk o5 hsct output ? o6 reserved ? o7 reserved tgo0 hwou t ocds; enx table 2-9 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-58 v 1.1 2015-05 m24 p20.1 i lp / pu1 / vext general-purpose input tin60 gtm input tgi1 ocds input p20.1 o0 general-purpose output tout60 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved tgo1 hwou t ocds; enx n24 p20.2 i lp / pu / vext general-purpose input this pin is latched at power on reset release to enter test mode. testmode ocds input p20.2 o0 output function not available ? o1 output function not available ? o2 output function not available ? o3 output function not available ? o4 output function not available ? o5 output function not available ? o6 output function not available ? o7 output function not available m25 p20.3 i lp / pu1 / vext general-purpose input tin61 gtm input t6ina gpt120 input arx3c asclin3 input p20.3 o0 general-purpose output tout61 o1 gtm output atx3 o2 asclin3 output slso09 o3 qspi0 output slso29 o4 qspi2 output txdcan3 o5 can node 3 output txdcanr1 o6 can node 1 output (multicanr+) ? o7 reserved table 2-10 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-59 v 1.1 2015-05 l22 p20.6 i lp / pu1 / vext general-purpose input tin62 gtm input p20.6 o0 general-purpose output tout62 o1 gtm output arts1 o2 asclin1 output slso08 o3 qspi0 output slso28 o4 qspi2 output ? o5 reserved wdt2lck o6 scu output ? o7 reserved l24 p20.7 i lp / pu1 / vext general-purpose input tin63 gtm input acts1a asclin1 input rxdcan0b can node 0 input p20.7 o0 general-purpose output tout63 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved wdt1lck o6 scu output cout63 o7 ccu61 output l25 p20.8 i mp / pu1 / vext general-purpose input tin64 gtm input p20.8 o0 general-purpose output tout64 o1 gtm output aslso1 o2 asclin1 output slso00 o3 qspi0 output slso10 o4 qspi1 output txdcan0 o5 can node 0 output wdt0lck o6 scu output cc60 o7 ccu61 output table 2-10 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-60 v 1.1 2015-05 k22 p20.9 i lp / pu1 / vext general-purpose input tin65 gtm input arx1c asclin1 input rxdcan3e can node 3 input req11 scu input slsi0b qspi0 input p20.9 o0 general-purpose output tout65 o1 gtm output ? o2 reserved slso01 o3 qspi0 output slso11 o4 qspi1 output ? o5 reserved wdtslck o6 scu output cc61 o7 ccu61 output k24 p20.10 i mp / pu1 / vext general-purpose input tin66 gtm input p20.10 o0 general-purpose output tout66 o1 gtm output atx1 o2 asclin1 output slso06 o3 qspi0 output slso27 o4 qspi2 output txdcan3 o5 can node 3 output asclk1 o6 asclin1 output cc62 o7 ccu61 output k25 p20.11 i mp / pu1 / vext general-purpose input tin67 gtm input sclk0a qspi0 input p20.11 o0 general-purpose output tout67 o1 gtm output ? o2 reserved sclk0 o3 qspi0 output ? o4 reserved ? o5 reserved ? o6 reserved cout60 o7 ccu61 output table 2-10 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-61 v 1.1 2015-05 j24 p20.12 i mp / pu1 / vext general-purpose input tin68 gtm input mrst0a qspi0 input p20.12 o0 general-purpose output tout68 o1 gtm output ? o2 reserved mrst0 o3 qspi0 output mtsr0 o4 qspi0 output ? o5 reserved ? o6 reserved cout61 o7 ccu61 output j25 p20.13 i mp / pu1 / vext general-purpose input tin69 gtm input slsi0a qspi0 input p20.13 o0 general-purpose output tout69 o1 gtm output ? o2 reserved slso02 o3 qspi0 output slso12 o4 qspi1 output sclk0 o5 qspi0 output ? o6 reserved cout62 o7 ccu61 output h25 p20.14 i mp / pu1 / vext general-purpose input tin70 gtm input mtsr0a qspi0 input p20.14 o0 general-purpose output tout70 o1 gtm output ? o2 reserved mtsr0 o3 qspi0 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-10 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-62 v 1.1 2015-05 table 2-11 port 21 functions pin symbol ctrl type function r22 p21.0 i lvdsh_n/ pu1 / vddp3 general-purpose input tin51 gtm input mrst4dn qspi4 input (lvds) hold ebu input p21.0 o0 general-purpose output tout51 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdc o6 eth output baaba0 o7 ebu output (combined for baa and ba0) hsm1 o hsm output p22 p21.1 i lvdsh_p/ pu1 / vddp3 general-purpose input tin52 gtm input ethmdiob eth input (not for production purposes) mrst4dp qspi4 input (lvds) wait ebu input p21.1 o0 general-purpose output tout52 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdio o6 eth output (not for production purposes) breqba1 o7 ebu output (combined for breq and ba1) hsm2 o hsm output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-63 v 1.1 2015-05 r24 p21.2 i lvdsh_n/ pu1 / vddp3 general-purpose input tin53 gtm input mrst2cn qspi2 input (lvds) mrst4cn qspi4 input (lvds) arx3gn asclin3 input (lvds) emgstopb scu input rxdn hsct input (lvds) p21.2 o0 general-purpose output tout53 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved ethmdc o5 eth output sdrama8 o6 ebu output ? o7 reserved p24 p21.3 i lvdsh_p/ pu1 / vddp3 general-purpose input tin54 gtm input mrst2cp qspi2 input (lvds) mrst4cp qspi4 input (lvds) arx3gp asclin3 input (lvds) rxdp hsct input (lvds) p21.3 o0 general-purpose output tout54 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama9 o6 ebu output ? o7 reserved ethmdiod hwout eth input/output table 2-11 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-64 v 1.1 2015-05 r25 p21.4 i lvdsh_n/ pu1 / vddp3 general-purpose input tin55 gtm input p21.4 o0 general-purpose output tout55 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama10 o6 ebu output ? o7 reserved txdn hsct hsct output (lvds) p25 p21.5 i lvdsh_p/ pu1 / vddp3 general-purpose input tin56 gtm input p21.5 o0 general-purpose output tout56 o1 gtm output asclk3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved sdrama11 o6 ebu output ? o7 reserved txdp hsct hsct output (lvds) n22 p21.6 i a2 / pu / vddp3 general-purpose input tin57 gtm input arx3f asclin3 input tgi2 ocds input tdi ocds (jtag) input t5euda gpt120 input p21.6 o0 general-purpose output tout57 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved sysclk o5 hsct output sdrama12 o6 ebu output t3out o7 gpt120 output tgo2 hwout ocds; enx table 2-11 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-65 v 1.1 2015-05 n21 p21.7 i a2 / pu / vddp3 general-purpose input tin58 gtm input dap2 ocds (3-pin dap) input in the 3-pin dap mode this pin is used as dap2. in the 2-pin dap mode this pin is used as p21.7 and controlled by the related port control logic tgi3 ocds input ethrxerb eth input t5ina gpt120 input p21.7 o0 general-purpose output tout58 o1 gtm output atx3 o2 asclin3 output asclk3 o3 asclin3 output ? o4 reserved ? o5 reserved sdrama13 o6 ebu output t6out o7 gpt120 output tgo3 hwout ocds; enx tdo ocds (jtag); enx the jtag tdo function is overlayed with p21.7 via a double bond. in jtag mode this pin is used as tdo, after power-on reset it is highz. dap2 ocds (3-pin dap); enx in the 3-pin dap mode this pin is used as dap2. table 2-12 port 22 functions pin symbol ctrl type function w25 p22.0 i lvdsm_n / pu1 / vext general-purpose input tin47 gtm input mtsr4b qspi4 input p22.0 o0 general-purpose output tout47 o1 gtm output atx3n o2 asclin3 output (lvds) mtsr4 o3 qspi4 output sclk4n o4 qspi4 output (lvds) fcln1 o5 msc1 output (lvds) fclnd1 o6 msc1 output (lvds) ? o7 reserved table 2-11 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-66 v 1.1 2015-05 w24 p22.1 i lvdsm_p / pu1 / vext general-purpose input tin48 gtm input mrst4b qspi4 input p22.1 o0 general-purpose output tout48 o1 gtm output atx3p o2 asclin3 output (lvds) mrst4 o3 qspi4 output sclk4p o4 qspi4 output (lvds) fclp1 o5 msc1 output (lvds) ? o6 reserved ? o7 reserved y25 p22.2 i lvdsm_n / pu1 / vext general-purpose input tin49 gtm input slsi4b qspi4 input p22.2 o0 general-purpose output tout49 o1 gtm output ? o2 reserved slso43 o3 qspi4 output mtsr4n o4 qspi4 output (lvds) son1 o5 msc1 output (lvds) sond1 o6 msc1 output (lvds) ? o7 reserved y24 p22.3 i lvdsm_p / pu1 / vext general-purpose input tin50 gtm input sclk4b qspi4 input p22.3 o0 general-purpose output tout50 o1 gtm output ? o2 reserved sclk4 o3 qspi4 output mtsr4p o4 qspi4 output (lvds) sop1 o5 msc1 output (lvds) ? o6 reserved ? o7 reserved table 2-12 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-67 v 1.1 2015-05 w21 p22.4 i lp / pu1 / vext general-purpose input tin130 gtm input p22.4 o0 general-purpose output tout130 o1 gtm output ? o2 reserved ? o3 reserved slso012 o4 qspi0 output psitx4 o5 psi5 output ? o6 reserved ? o7 reserved w22 p22.5 i lp / pu1 / vext general-purpose input tin131 gtm input mtsr0c qspi0 input psirx4b psi5 input p22.5 o0 general-purpose output tout131 o1 gtm output ? o2 reserved ? o3 reserved mtsr0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved v21 p22.6 i lp / pu1 / vext general-purpose input tin132 gtm input mrst0c qspi0 input p22.6 o0 general-purpose output tout132 o1 gtm output ? o2 reserved ? o3 reserved mrst0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-12 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-68 v 1.1 2015-05 v22 p22.7 i lp / pu1 / vext general-purpose input tin133 gtm input sclk0c qspi0 input p22.7 o0 general-purpose output tout133 o1 gtm output ? o2 reserved ? o3 reserved sclk0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved u21 p22.8 i lp / pu1 / vext general-purpose input tin134 gtm input sclk0b qspi0 input p22.8 o0 general-purpose output tout134 o1 gtm output ? o2 reserved ? o3 reserved sclk0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved u22 p22.9 i lp / pu1 / vext general-purpose input tin135 gtm input mrst0b qspi0 input p22.9 o0 general-purpose output tout135 o1 gtm output ? o2 reserved ? o3 reserved mrst0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-12 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-69 v 1.1 2015-05 t21 p22.10 i lp / pu1 / vext general-purpose input tin136 gtm input mtsr0b qspi0 input p22.10 o0 general-purpose output tout136 o1 gtm output ? o2 reserved ? o3 reserved mtsr0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved t22 p22.11 i lp / pu1 / vext general-purpose input tin137 gtm input p22.11 o0 general-purpose output tout137 o1 gtm output ? o2 reserved ? o3 reserved slso010 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-13 port 23 functions pin symbol ctrl type function ac25 p23.0 i lp / pu1 / vext general-purpose input tin41 gtm input p23.0 o0 general-purpose output tout41 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-12 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-70 v 1.1 2015-05 ab24 p23.1 i mp+ / pu1 / vext general-purpose input tin42 gtm input sdi10 msc1 input p23.1 o0 general-purpose output tout42 o1 gtm output arts1 o2 asclin1 output slso46 o3 qspi4 output gtmclk0 o4 gtm output ? o5 reserved extclk0 o6 scu output ? o7 reserved ab25 p23.2 i lp / pu1 / vext general-purpose input tin43 gtm input p23.2 o0 general-purpose output tout43 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved aa24 p23.3 i lp / pu1 / vext general-purpose input tin44 gtm input inj10 msc1 input p23.3 o0 general-purpose output tout44 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-13 port 23 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-71 v 1.1 2015-05 aa25 p23.4 i mp+ / pu1 / vext general-purpose input tin45 gtm input p23.4 o0 general-purpose output tout45 o1 gtm output ? o2 reserved slso45 o3 qspi4 output end12 o4 msc1 output en10 o5 msc1 output ? o6 reserved ? o7 reserved aa22 p23.5 i mp+ / pu1 / vext general-purpose input tin46 gtm input p23.5 o0 general-purpose output tout46 o1 gtm output ? o2 reserved slso44 o3 qspi4 output end13 o4 msc1 output en11 o5 msc1 output ? o6 reserved ? o7 reserved y22 p23.6 i lp / pu1 / vext general-purpose input tin138 gtm input p23.6 o0 general-purpose output tout138 o1 gtm output ? o2 reserved ? o3 reserved slso011 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-13 port 23 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-72 v 1.1 2015-05 y21 p23.7 i lp / pu1 / vext general-purpose input tin139 gtm input p23.7 o0 general-purpose output tout139 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-14 port 24 functions pin symbol ctrl type function u29 p24.0 i a2 / pu1 / vebu general-purpose input tin222 gtm input p24.0 o0 general-purpose output tout222 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq11 hwou t ebu data bus line (sdram) a11 ebu output u30 p24.1 i a2 / pu1 / vebu general-purpose input tin223 gtm input p24.1 o0 general-purpose output tout223 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq15 hwou t ebu data bus line (sdram) a15 ebu output table 2-13 port 23 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-73 v 1.1 2015-05 t29 p24.2 i a2 / pu1 / vebu general-purpose input tin224 gtm input p24.2 o0 general-purpose output tout224 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq14 hwou t ebu data bus line (sdram) a14 ebu output t30 p24.3 i a2 / pu1 / vebu general-purpose input tin225 gtm input p24.3 o0 general-purpose output tout225 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq13 hwou t ebu data bus line (sdram) a13 ebu output r29 p24.4 i a2 / pu1 / vebu general-purpose input tin226 gtm input p24.4 o0 general-purpose output tout226 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq9 hwou t ebu data bus line (sdram) a9 ebu output table 2-14 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-74 v 1.1 2015-05 r30 p24.5 i a2 / pu1 / vebu general-purpose input tin227 gtm input p24.5 o0 general-purpose output tout227 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq12 hwou t ebu data bus line (sdram) a12 ebu output p29 p24.6 i a2 / pu1 / vebu general-purpose input tin228 gtm input p24.6 o0 general-purpose output tout228 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq5 hwou t ebu data bus line (sdram) a5 ebu output p30 p24.7 i a2 / pu1 / vebu general-purpose input tin229 gtm input p24.7 o0 general-purpose output tout229 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq8 hwou t ebu data bus line (sdram) a8 ebu output table 2-14 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-75 v 1.1 2015-05 n29 p24.8 i a2 / pu1 / vebu general-purpose input tin230 gtm input p24.8 o0 general-purpose output tout230 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq10 hwou t ebu data bus line (sdram) a10 ebu output n30 p24.9 i a2 / pu1 / vebu general-purpose input tin231 gtm input p24.9 o0 general-purpose output tout231 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq6 hwou t ebu data bus line (sdram) a6 ebu output m29 p24.10 i a2 / pu1 / vebu general-purpose input tin232 gtm input p24.10 o0 general-purpose output tout232 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq4 hwou t ebu data bus line (sdram) a4 ebu output table 2-14 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-76 v 1.1 2015-05 m30 p24.11 i a2 / pu1 / vebu general-purpose input tin233 gtm input p24.11 o0 general-purpose output tout233 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq3 hwou t ebu data bus line (sdram) a3 ebu output l29 p24.12 i a2 / pu1 / vebu general-purpose input tin234 gtm input p24.12 o0 general-purpose output tout234 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq1 hwou t ebu data bus line (sdram) a1 ebu output l30 p24.13 i a2 / pu1 / vebu general-purpose input tin235 gtm input p24.13 o0 general-purpose output tout235 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq2 hwou t ebu data bus line (sdram) a2 ebu output table 2-14 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-77 v 1.1 2015-05 k29 p24.14 i a2 / pu1 / vebu general-purpose input tin236 gtm input p24.14 o0 general-purpose output tout236 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq0 hwou t ebu data bus line (sdram) a0 ebu output k30 p24.15 i a2 / pu1 / vebu general-purpose input tin237 gtm input p24.15 o0 general-purpose output tout237 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq7 hwou t ebu data bus line (sdram) a7 ebu output table 2-14 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-78 v 1.1 2015-05 table 2-15 port 25 functions pin symbol ctrl type function ag30 p25.0 i a2 / pu1 / vebu general-purpose input tin206 gtm input sdclki ebu input p25.0 o0 general-purpose output tout206 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved bfclko hwou t ebu output sdclko ebu output af30 p25.1 i a2 / pu1 / vebu general-purpose input tin207 gtm input p25.1 o0 general-purpose output tout207 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved rd hwou t ebu output ras ebu output af29 p25.2 i a2 / pu1 / vebu general-purpose input tin208 gtm input p25.2 o0 general-purpose output tout208 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved rd/wr hwou t ebu output wr ebu output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-79 v 1.1 2015-05 ae30 p25.3 i a2 / pu1 / vebu general-purpose input tin209 gtm input holda ebu input p25.3 o0 general-purpose output tout209 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved baaba0 o7 ebu output (combined for baa and ba0) cs2 hwou t ebu output dqm1 ebu output holda ebu output ae29 p25.4 i a2 / pu1 / vebu general-purpose input tin210 gtm input p25.4 o0 general-purpose output tout210 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved cs1 hwou t ebu output dqm0 ebu output ad30 p25.5 i a2 / pu1 / vebu general-purpose input tin211 gtm input p25.5 o0 general-purpose output tout211 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved cs0 hwou t ebu output table 2-15 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-80 v 1.1 2015-05 w29 p25.6 i a2 / pu1 / vebu general-purpose input p25.6 o0 general-purpose output tout212 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved cke hwou t ebu output ad29 p25.7 i a2 / pu1 / vebu general-purpose input tin213 gtm input p25.7 o0 general-purpose output tout213 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved adv hwou t ebu output cas ebu output ac29 p25.8 i a2 / pu1 / vebu general-purpose input tin214 gtm input p25.8 o0 general-purpose output tout214 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a23 o5 ebu output sdrama0 o6 ebu output ? o7 reserved bc0 hwou t ebu output table 2-15 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-81 v 1.1 2015-05 ac30 p25.9 i a2 / pu1 / vebu general-purpose input tin215 gtm input p25.9 o0 general-purpose output tout215 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a22 o5 ebu output sdrama1 o6 ebu output ? o7 reserved bc1 hwou t ebu output ab29 p25.10 i a2 / pu1 / vebu general-purpose input tin216 gtm input p25.10 o0 general-purpose output tout216 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a21 o5 ebu output sdrama2 o6 ebu output ? o7 reserved bc2 hwou t ebu output ab30 p25.11 i a2 / pu1 / vebu general-purpose input tin217 gtm input p25.11 o0 general-purpose output tout217 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a20 o5 ebu output sdrama3 o6 ebu output ? o7 reserved bc3 hwou t ebu output table 2-15 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-82 v 1.1 2015-05 aa29 p25.12 i a2 / pu1 / vebu general-purpose input tin218 gtm input p25.12 o0 general-purpose output tout218 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama4 o6 ebu output ? o7 reserved a19 hwou t ebu output aa30 p25.13 i a2 / pu1 / vebu general-purpose input tin219 gtm input p25.13 o0 general-purpose output tout219 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama5 o6 ebu output ? o7 reserved a17 hwou t ebu output y29 p25.14 i a2 / pu1 / vebu general-purpose input tin220 gtm input p25.14 o0 general-purpose output tout220 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama6 o6 ebu output ? o7 reserved a18 hwou t ebu output table 2-15 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-83 v 1.1 2015-05 y30 p25.15 i a2 / pu1 / vebu general-purpose input tin221 gtm input p25.15 o0 general-purpose output tout221 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama7 o6 ebu output ? o7 reserved a16 hwou t ebu output table 2-16 port 26 functions pin symbol ctrl type function ag29 p26.0 i lp / pu1 / vflexe general-purpose input tin212 gtm input bfclki ebu input p26.0 o0 general-purpose output tout212 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-15 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-84 v 1.1 2015-05 table 2-17 port 30 functions pin symbol ctrl type function aj21 p30.0 i mp / pu1 / vflexe general-purpose input tin190 gtm input p30.0 o0 general-purpose output tout190 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad14 hwou t ebu address / data bus line ak21 p30.1 i mp / pu1 / vflexe general-purpose input tin191 gtm input p30.1 o0 general-purpose output tout191 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad11 hwou t ebu address / data bus line aj22 p30.2 i mp / pu1 / vflexe general-purpose input tin192 gtm input p30.2 o0 general-purpose output tout192 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad12 hwou t ebu address / data bus line tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-85 v 1.1 2015-05 ak22 p30.3 i mp / pu1 / vflexe general-purpose input tin193 gtm input p30.3 o0 general-purpose output tout193 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad15 hwou t ebu address / data bus line aj23 p30.4 i mp / pu1 / vflexe general-purpose input tin194 gtm input p30.4 o0 general-purpose output tout194 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad8 hwou t ebu address / data bus line ak23 p30.5 i mp / pu1 / vflexe general-purpose input tin195 gtm input p30.5 o0 general-purpose output tout195 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad13 hwou t ebu address / data bus line table 2-17 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-86 v 1.1 2015-05 aj24 p30.6 i mp / pu1 / vflexe general-purpose input tin196 gtm input p30.6 o0 general-purpose output tout196 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad4 hwou t ebu address / data bus line ak24 p30.7 i mp / pu1 / vflexe general-purpose input tin197 gtm input p30.7 o0 general-purpose output tout197 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad7 hwou t ebu address / data bus line aj25 p30.8 i mp / pu1 / vflexe general-purpose input tin198 gtm input p30.8 o0 general-purpose output tout198 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad3 hwou t ebu address / data bus line table 2-17 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-87 v 1.1 2015-05 ak25 p30.9 i mp / pu1 / vflexe general-purpose input tin199 gtm input p30.9 o0 general-purpose output tout199 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad0 hwou t ebu address / data bus line aj26 p30.10 i mp / pu1 / vflexe general-purpose input tin200 gtm input p30.10 o0 general-purpose output tout200 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad5 hwou t ebu address / data bus line ak26 p30.11 i mp / pu1 / vflexe general-purpose input tin201 gtm input p30.11 o0 general-purpose output tout201 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad10 hwou t ebu address / data bus line table 2-17 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-88 v 1.1 2015-05 aj27 p30.12 i mp / pu1 / vflexe general-purpose input tin202 gtm input p30.12 o0 general-purpose output tout202 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad9 hwou t ebu address / data bus line ak27 p30.13 i mp / pu1 / vflexe general-purpose input tin203 gtm input p30.13 o0 general-purpose output tout203 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad2 hwou t ebu address / data bus line aj28 p30.14 i mp / pu1 / vflexe general-purpose input tin204 gtm input p30.14 o0 general-purpose output tout204 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad1 hwou t ebu address / data bus line table 2-17 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-89 v 1.1 2015-05 ak28 p30.15 i mp / pu1 / vflexe general-purpose input tin205 gtm input p30.15 o0 general-purpose output tout205 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad6 hwou t ebu address / data bus line table 2-18 port 31 functions pin symbol ctrl type function aj12 p31.0 i mp / pu1 / vflexe general-purpose input tin174 gtm input p31.0 o0 general-purpose output tout174 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad30 hwou t ebu address / data bus line ak12 p31.1 i mp / pu1 / vflexe general-purpose input tin175 gtm input p31.1 o0 general-purpose output tout175 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad29 hwou t ebu address / data bus line table 2-17 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-90 v 1.1 2015-05 aj13 p31.2 i mp / pu1 / vflexe general-purpose input tin176 gtm input p31.2 o0 general-purpose output tout176 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad28 hwou t ebu address / data bus line ak13 p31.3 i mp / pu1 / vflexe general-purpose input tin177 gtm input p31.3 o0 general-purpose output tout177 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad26 hwou t ebu address / data bus line aj14 p31.4 i mp / pu1 / vflexe general-purpose input tin178 gtm input p31.4 o0 general-purpose output tout178 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad24 hwou t ebu address / data bus line table 2-18 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-91 v 1.1 2015-05 ak14 p31.5 i mp / pu1 / vflexe general-purpose input tin179 gtm input p31.5 o0 general-purpose output tout179 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad23 hwou t ebu address / data bus line aj15 p31.6 i mp / pu1 / vflexe general-purpose input tin180 gtm input p31.6 o0 general-purpose output tout180 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad20 hwou t ebu address / data bus line ak15 p31.7 i mp / pu1 / vflexe general-purpose input tin181 gtm input p31.7 o0 general-purpose output tout181 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad16 hwou t ebu address / data bus line table 2-18 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-92 v 1.1 2015-05 aj16 p31.8 i mp / pu1 / vflexe general-purpose input tin182 gtm input p31.8 o0 general-purpose output tout182 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad31 hwou t ebu address / data bus line ak16 p31.9 i mp / pu1 / vflexe general-purpose input tin183 gtm input p31.9 o0 general-purpose output tout183 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad27 hwou t ebu address / data bus line aj17 p31.10 i mp / pu1 / vflexe general-purpose input tin184 gtm input p31.10 o0 general-purpose output tout184 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad21 hwou t ebu address / data bus line table 2-18 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-93 v 1.1 2015-05 ak17 p31.11 i mp / pu1 / vflexe general-purpose input tin185 gtm input p31.11 o0 general-purpose output tout185 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad25 hwou t ebu address / data bus line aj18 p31.12 i mp / pu1 / vflexe general-purpose input tin186 gtm input p31.12 o0 general-purpose output tout186 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad19 hwou t ebu address / data bus line ak18 p31.13 i mp / pu1 / vflexe general-purpose input tin187 gtm input p31.13 o0 general-purpose output tout187 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad22 hwou t ebu address / data bus line table 2-18 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-94 v 1.1 2015-05 aj19 p31.14 i mp / pu1 / vflexe general-purpose input tin188 gtm input p31.14 o0 general-purpose output tout188 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad18 hwou t ebu address / data bus line ak19 p31.15 i mp / pu1 / vflexe general-purpose input tin189 gtm input p31.15 o0 general-purpose output tout189 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad17 hwou t ebu address / data bus line table 2-18 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-95 v 1.1 2015-05 table 2-19 port 32 functions pin symbol ctrl type function ae22 p32.0 i lp / px/ vext general-purpose input tin36 gtm input fdest pmu input vgate1n smps mode: analog output. external pass device gate control for evr13 p32.0 o0 general-purpose output tout36 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ae23 p32.2 i lp / pu1 / vext general-purpose input tin38 gtm input arx3d asclin3 input rxdcan3b can node 3 input rxdcanr1d can node 1 input (multicanr+) p32.2 o0 general-purpose output tout38 o1 gtm output atx3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved dcdcsync o6 scu output ? o7 reserved ae24 p32.3 i lp / pu1 / vext general-purpose input tin39 gtm input p32.3 o0 general-purpose output tout39 o1 gtm output atx3 o2 asclin3 output ? o3 reserved asclk3 o4 asclin3 output txdcan3 o5 can node 3 output txdcanr1 o6 can node 1 output (multicanr+) ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-96 v 1.1 2015-05 ad23 p32.4 i mp+ / pu1 / vext general-purpose input tin40 gtm input acts1b asclin1 input sdi12 msc1 input p32.4 o0 general-purpose output tout40 o1 gtm output ? o2 reserved end12 o3 msc1 output gtmclk1 o4 gtm output en10 o5 msc1 output extclk1 o6 scu output cout63 o7 ccu60 output aa20 p32.5 i lp / pu1 / vext general-purpose input tin140 gtm input p32.5 o0 general-purpose output tout140 o1 gtm output atx2 o2 asclin2 output ? o3 reserved ? o4 reserved ? o5 reserved txdcan2 o6 can node 2 output ? o7 reserved ab20 p32.6 i lp / pu1 / vext general-purpose input tgi4 ocds input tin141 gtm input rxdcan2c can node 2 input arx2f asclin2 input p32.6 o0 general-purpose output tout141 o1 gtm output ? o2 reserved ? o3 reserved slso212 o4 qspi2 output ? o5 reserved ? o6 reserved ? o7 reserved tgo4 hwou t ocds; enx table 2-19 port 32 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-97 v 1.1 2015-05 ab21 p32.7 i lp / pu1 / vext general-purpose input tin142 gtm input tgi5 ocds input p32.7 o0 general-purpose output tout142 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved tgo5 hwou t ocds; enx table 2-20 port 33 functions pin symbol ctrl type function ad15 p33.0 i lp / pu1 / vext general-purpose input tin22 gtm input dsitr0e dsadc channel 0 input e p33.0 o0 general-purpose output tout22 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved vadcg2bfl0 o6 vadc output ? o7 reserved table 2-19 port 32 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-98 v 1.1 2015-05 ae15 p33.1 i lp / pu1 / vext general-purpose input tin23 gtm input psirx0c psi5 input sent9c sent input dscin2b dsadc channel 2 input b dsitr1e dsadc channel 1 input e p33.1 o0 general-purpose output tout23 o1 gtm output aslso3 o2 asclin3 output sclk2 o3 qspi2 output dscout2 o4 dsadc channel 2 output vadcemux02 o5 vadc output vadcg2bfl1 o6 vadc output ? o7 reserved ad16 p33.2 i lp / pu1 / vext general-purpose input tin24 gtm input sent8c sent input dsdin2b dsadc channel 2 input b dsitr2e dsadc channel 2 input e p33.2 o0 general-purpose output tout24 o1 gtm output asclk3 o2 asclin3 output slso210 o3 qspi2 output psitx0 o4 psi5 output vadcemux01 o5 vadc output vadcg2bfl2 o6 vadc output ? o7 reserved table 2-20 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-99 v 1.1 2015-05 ae16 p33.3 i lp / pu1 / vext general-purpose input tin25 gtm input psirx1c psi5 input sent7c sent input dscin1b dsadc channel 1 input b p33.3 o0 general-purpose output tout25 o1 gtm output ? o2 reserved ? o3 reserved dscout1 o4 dsadc channel 1 output vadcemux00 o5 vadc output vadcg2bfl3 o6 vadc output ? o7 reserved ad17 p33.4 i lp / pu1 / vext general-purpose input tin26 gtm input sent6c sent input ctrapc ccu61 input dsdin1b dsadc channel 1 input dsitr0f dsadc channel 0 input f p33.4 o0 general-purpose output tout26 o1 gtm output arts2 o2 asclin2 output slso212 o3 qspi2 output psitx1 o4 psi5 output vadcemux12 o5 vadc output vadcg0bfl0 o6 vadc output ? o7 reserved table 2-20 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-100 v 1.1 2015-05 ae17 p33.5 i lp / pu1 / vext general-purpose input tin27 gtm input acts2b asclin2 input psirx2c psi5 input psisrxc psi5-s input sent5c sent input ccpos2c ccu61 input t4eudb gpt120 input dscin0b dsadc channel 0 input b dsitr1f dsadc channel 1 input f p33.5 o0 general-purpose output tout27 o1 gtm output slso07 o2 qspi0 output slso17 o3 qspi1 output dscout0 o4 dsadc channel 0 output vadcemux11 o5 vadc output vadcg0bfl1 o6 vadc output ? o7 reserved ad18 p33.6 i lp / pu1 / vext general-purpose input tin28 gtm input sent4c sent input ccpos1c ccu61 input t2eudb gpt120 input dsdin0b dsadc channel 0 input b dsitr2f dsadc channel 2 input f p33.6 o0 general-purpose output tout28 o1 gtm output aslso2 o2 asclin2 output slso211 o3 qspi2 output psitx2 o4 psi5 output vadcemux10 o5 vadc output vadcg1bfl0 o6 vadc output psistx o7 psi5-s output table 2-20 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-101 v 1.1 2015-05 ae18 p33.7 i lp / pu1 / vext general-purpose input tin29 gtm input rxdcan0e can node 0 input req8 scu input ccpos0c ccu61 input t2inb gpt120 input p33.7 o0 general-purpose output tout29 o1 gtm output asclk2 o2 asclin2 output slso47 o3 qspi4 output ? o4 reserved ? o5 reserved vadcg1bfl1 o6 vadc output ? o7 reserved ad19 p33.8 i mp / highz / vext general-purpose input tin30 gtm input arx2e asclin2 input emgstopa scu input p33.8 o0 general-purpose output tout30 o1 gtm output atx2 o2 asclin2 output slso42 o3 qspi4 output ? o4 reserved txdcan0 o5 can node 0 output ? o6 reserved cout62 o7 ccu61 output smufsp hwou t smu ae19 p33.9 i lp / pu1 / vext general-purpose input tin31 gtm input hsic3ina qspi3 input p33.9 o0 general-purpose output tout31 o1 gtm output atx2 o2 asclin2 output slso41 o3 qspi4 output asclk2 o4 asclin2 output ? o5 reserved ? o6 reserved cc62 o7 ccu61 output table 2-20 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-102 v 1.1 2015-05 ad20 p33.10 i mp / pu1 / vext general-purpose input tin32 gtm input slsi4a qspi4 input hsic3inb qspi3 input p33.10 o0 general-purpose output tout32 o1 gtm output slso16 o2 qspi1 output slso40 o3 qspi4 output aslso1 o4 asclin1 output psisclk o5 psi5-s output ? o6 reserved cout61 o7 ccu61 output ae20 p33.11 i mp / pu1 / vext general-purpose input tin33 gtm input sclk4a qspi4 input p33.11 o0 general-purpose output tout33 o1 gtm output asclk1 o2 asclin1 output sclk4 o3 qspi4 output ? o4 reserved ? o5 reserved dscgpwmn o6 dsadc channel output cc61 o7 ccu61 output ad21 p33.12 i mp / pu1 / vext general-purpose input tin34 gtm input mtsr4a qspi4 input p33.12 o0 general-purpose output tout34 o1 gtm output atx1 o2 asclin1 output mtsr4 o3 qspi4 output asclk1 o4 asclin1 output ? o5 reserved dscgpwmp o6 dsadc output cout60 o7 ccu61 output table 2-20 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-103 v 1.1 2015-05 ae21 p33.13 i mp / pu1 / vext general-purpose input tin35 gtm input arx1f asclin1 input mrst4a qspi4 input dssgnb dsadc channel input b inj11 msc1 input p33.13 o0 general-purpose output tout35 o1 gtm output atx1 o2 asclin1 output mrst4 o3 qspi4 output slso26 o4 qspi2 output ? o5 reserved dcdcsync o6 scu output cc60 o7 ccu61 output aa19 p33.14 i lp / pu1 / vext general-purpose input tin143 gtm input tgi6 ocds input sclk2d qspi2 input p33.14 o0 general-purpose output tout143 o1 gtm output ? o2 reserved sclk2 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cc62 o7 ccu60 output tgo6 hwou t ocds; enx table 2-20 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-104 v 1.1 2015-05 ab19 p33.15 i lp / pu1 / vext general-purpose input tin144 gtm input tgi7 ocds input p33.15 o0 general-purpose output tout144 o1 gtm output ? o2 reserved slso211 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cout62 o7 ccu60 output tgo7 hwou t ocds; enx table 2-21 port 34 functions pin symbol ctrl type function ab16 p34.1 i lp / pu1 / vext general-purpose input tin146 gtm input p34.1 o0 general-purpose output tout146 o1 gtm output atx0 o2 asclin0 output ? o3 reserved txdcan0 o4 can node 0 output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved cout63 o7 ccu60 output aa17 p34.2 i lp / pu1 / vext general-purpose input tin147 gtm input arx0d asclin0 input rxdcan0g can node 0 input rxdcanr0c can node 0 input (multicanr+) p34.2 o0 general-purpose output tout147 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cc60 o7 ccu60 output table 2-20 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-105 v 1.1 2015-05 ab17 p34.3 i lp / pu1 / vext general-purpose input tin148 gtm input p34.3 o0 general-purpose output tout148 o1 gtm output ? o2 reserved ? o3 reserved slso210 o4 qspi2 output ? o5 reserved ? o6 reserved cout60 o7 ccu60 output aa18 p34.4 i lp / pu1 / vext general-purpose input tin149 gtm input mrst2d qspi2 input p34.4 o0 general-purpose output tout149 o1 gtm output ? o2 reserved ? o3 reserved mrst2 o4 qspi2 output ? o5 reserved ? o6 reserved cc61 o7 ccu60 output ab18 p34.5 i lp / pu1 / vext general-purpose input tin150 gtm input mtsr2d qspi2 input p34.5 o0 general-purpose output tout150 o1 gtm output ? o2 reserved ? o3 reserved mtsr2 o4 qspi2 output ? o5 reserved ? o6 reserved cout61 o7 ccu60 output table 2-21 port 34 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-106 v 1.1 2015-05 table 2-22 port 40 functions pin symbol ctrl type function ad7 p40.0 i s / highz / vddm general-purpose input vadcg3.0 vadc analog input channel 0 of group 3 ds2pb dsadc: positive analog input of channel 2, pin b ccpos0d ccu60 input sent0a sent input ad6 p40.1 i s / highz / vddm general-purpose inpu.t vadcg3.1 vadc analog input channel 1 of group 3 (md) ds2nb dsadc: negative analog input channel 2, pin b ccpos1b ccu60 input sent1a sent input ac7 p40.2 i s / highz / vddm general-purpose inpu.t vadcg3.2 vadc analog input channel 2 of group 3 (md) ccpos1d ccu60 input sent2a sent input ac6 p40.3 i s / highz / vddm general-purpose input vadcg3.3 vadc analog input channel 3 of group 3 (with pull down diagnostics) ccpos2b ccu60 input sent3a sent input w9 p40.4 i s / highz / vddm general-purpose input vadcg4.0 vadc analog input channel 0 of group 4 ccpos2d ccu60 input sent4a sent input y6 p40.5 i s / highz / vddm general-purpose input vadcg4.1 vadc analog input channel 1 of group 4 (md) ccpos0d ccu61 input sent5a sent input v9 p40.6 i s / highz / vddm general-purpose input vadcg4.4 vadc analog input channel 4 of group 4 ds3pa dsadc: positive analog input of channel 3, pin a ccpos1b ccu61 input sent6a sent input w7 p40.7 i s / highz / vddm general-purpose input vadcg4.5 vadc analog input channel 5 of group 4 ds3na dsadc: negative analog input channel 3, pin a ccpos1d ccu61 input sent7a sent input tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-107 v 1.1 2015-05 v10 p40.8 i s / highz / vddm general-purpose input vadcg4.6 vadc analog input channel 6 of group 4 ds3pb dsadc: positive analog input of channel 3, pin b ccpos2b ccu61 input sent8a sent input w6 p40.9 i s / highz / vddm general-purpose input vadcg4.7 vadc analog input channel 7 of group 4 ds3nb dsadc: negative analog input channel 3, pin b ccpos2d ccu61 input sent9a sent input aa1 p40.10 i s / highz / vddm general-purpose input vadcg10.3 vadc analog input channel 3 of group 10 (with pull down diagnostics) ds8nb dsadc: negative analog input channel 8, pin b sent10a sent input y1 p40.11 i s / highz / vddm general-purpose input vadcg10.4 vadc analog input channel 4 of group 10 ds8pa dsadc: positive analog input of channel 8, pin a sent11a sent input y2 p40.12 i s / highz / vddm general-purpose input vadcg10.5 vadc analog input channel 5 of group 10 ds8na dsadc: positive analog input of channel 8, pin a sent12a sent input w1 p40.13 i s / highz / vddm general-purpose input vadcg10.6 vadc analog input channel 6 of group 10 ds9pa dsadc: positive analog input of channel 9, pin a sent13a sent input w2 p40.14 i s / highz / vddm general-purpose input vadcg10.7 vadc analog input channel 7 of group 10 ds9na dsadc: positive analog input of channel 9, pin a sent14a sent input table 2-23 analog inputs pin symbol ctrl type function aa15 an0 i d / highz / vddm analog input 0 vadcg0.0 vadc analog input channel 0 of group 0 ds1pa dsadc: positive analog input of channel 1, pin a table 2-22 port 40 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-108 v 1.1 2015-05 ab15 an1 i d / highz / vddm analog input 1 vadcg0.1 vadc analog input channel 1 of group 0 (md) ds1na dsadc: negative analog input channel 1, pin a ad14 an2 i d / highz / vddm analog input 2 vadcg0.2 vadc analog input channel 2 of group 0 (md) ds0pa dsadc: positive analog input of channel 0, pin a ab14 an3 i d / highz / vddm analog input 3 vadcg0.3 vadc analog input channel 3 of group 0 ds0na dsadc: negative analog input channel 0, pin a aa14 an4 i d / highz / vddm analog input 4 vadcg0.4 vadc analog input channel 4 of group 0 ae14 an5 i d / highz / vddm analog input 5 vadcg0.5 vadc analog input channel 5 of group 0 aa13 an6 i d / highz / vddm analog input 6 vadcg0.6 vadc analog input channel 6 of group 0 ab13 an7 i d / highz / vddm analog input 7 vadcg0.7 vadc analog input channel 7 of group 0 (with pull down diagnostics) ad13 an8 i d / highz / vddm analog input 8 vadcg1.0 vadc analog input channel 0 of group 1 ab12 an9 i d / highz / vddm analog input 9 vadcg1.1 vadc analog input channel 1 of group 1 (md) ae13 an10 i d / highz / vddm analog input 10 vadcg1.2 vadc analog input channel 2 of group 1 (md) ad12 an11 i d / highz / vddm analog input 11 vadcg1.3 vadc analog input channel 3 of group 1 (with pull down diagnostics) aa12 an12 i d / highz / vddm analog input 12 vadcg1.4 vadc analog input channel 4 of group 1 ad11 an13 i d / highz / vddm analog input 13 vadcg1.5 vadc analog input channel 5 of group 1 ab11 an14 i d / highz / vddm analog input 14 vadcg1.6 vadc analog input channel 6 of group 1 aa11 an15 i d / highz / vddm analog input 15 vadcg1.7 vadc analog input channel 7 of group 1 ad10 an16 i d / highz / vddm analog input 16 vadcg2.0 vadc analog input channel 0 of group 2 ab10 an17 i d / highz / vddm analog input 17 vadcg2.1 vadc analog input channel 1 of group 2 (md) table 2-23 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-109 v 1.1 2015-05 ad9 an18 i d / highz / vddm analog input 18 vadcg2.2 vadc analog input channel 2 of group 2 (md) ad8 an19 i d / highz / vddm analog input 19 vadcg2.3 vadc analog input channel 3 of group 2 (with pull down diagnostics) ae8 an20 i d / highz / vddm analog input 20 vadcg2.4 vadc analog input channel 4 of group 2 ds2pa dsadc: positive analog input of channel 2, pin a ae7 an21 i d / highz / vddm analog input 21 vadcg2.5 vadc analog input channel 5 of group 2 ds2na dsadc: negative analog input channel 2, pin a aa10 an22 i d / highz / vddm analog input 22 vadcg2.6 vadc analog input channel 6 of group 2 y10 an23 i d / highz / vddm analog input 23 vadcg2.7 vadc analog input channel 7 of group 2 ad7 an24 i s / highz / vddm analog input 24 vadcg3.0 vadc analog input channel 0 of group 3 ds2pb dsadc: positive analog input of channel 2, pin b sent0a sent input channel 0, pin a ad6 an25 i s / highz / vddm analog input 24 vadcg3.1 vadc analog input channel 1 of group 3 (md) ds2nb dsadc: negative analog input channel 2, pin b sent1a sent input channel 1, pin a ac7 an26 i s / highz / vddm analog input 26 vadcg3.2 vadc analog input channel 2 of group 3 (md) sent2a sent input channel 2, pin a ac6 an27 i s / highz / vddm analog input 27 vadcg3.3 vadc analog input channel 3 of group 3 (with pull down diagnostics) sent3a sent input channel 3, pin a ab7 an28 i d / highz / vddm analog input 28 vadcg3.4 vadc analog input channel 4 of group 3 (with pull down diagnostics) ab6 an29 i d / highz / vddm analog input 29 vadcg3.5 vadc analog input channel 5 of group 3 (with pull down diagnostics) aa9 an30 i d / highz / vddm analog input 30 vadcg3.6 vadc analog input channel 6 of group 3 table 2-23 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-110 v 1.1 2015-05 y9 an31 i d / highz / vddm analog input 31 vadcg3.7 vadc analog input channel 7 of group 3 w9 an32 i s / highz / vddm analog input 32 vadcg4.0 vadc analog input channel 0 of group 4 sent4a sent input channel 4, pin a y6 an33 i s / highz / vddm analog input 33 vadcg4.1 vadc analog input channel 1 of group 4 (md) sent5a sent input channel 5, pin a w10 an34 i d / highz / vddm analog input 34 vadcg4.2 vadc analog input channel 2 of group 4 (md) y7 an35 i d / highz / vddm analog input 35 vadcg4.3 vadc analog input channel 3 of group 4 (with pull down diagnostics) v9 an36 i s / highz / vddm analog input 34 vadcg4.4 vadc analog input channel 4 of group 4 ds3pa dsadc: positive analog input of channel 3, pin a sent6a sent input channel 6, pin a w7 an37 i s / highz / vddm analog input 37 vadcg4.5 vadc analog input channel 5 of group 4 ds3na dsadc: negative analog input channel 3, pin a sent7a sent input channel 7, pin a v10 an38 i s / highz / vddm analog input 38 vadcg4.6 vadc analog input channel 6 of group 4 ds3pb dsadc: positive analog input of channel 3, pin b sent8a sent input channel 8, pin a w6 an39 i s / highz / vddm analog input 39 vadcg4.7 vadc analog input channel 7 of group 4 ds3nb dsadc: negative analog input channel 3, pin b sent9a sent input channel 9, pin a u10 an40 i d / highz / vddm analog input 40 vadcg5.0 vadc analog input channel 0 of group 5 u9 an41 i d / highz / vddm analog input 41 vadcg5.1 vadc analog input channel 1 of group 5 (md) t10 an42 i d / highz / vddm analog input 42 vadcg5.2 vadc analog input channel 2 of group 5 (md) t9 an43 i d / highz / vddm analog input 43 vadcg5.3 vadc analog input channel 3 of group 5 (with pull down diagnostics) table 2-23 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-111 v 1.1 2015-05 v6 an44 i d / highz / vddm analog input 44 vadcg5.4 vadc analog input channel 4 of group 5 ds3pc dsadc: positive analog input of channel 3, pin c v7 an45 i d / highz / vddm analog input 45 vadcg5.5 vadc analog input channel 5 of group 5 ds3nc dsadc: negative analog input channel 3, pin c u6 an46 i d / highz / vddm analog input 46 vadcg5.6 vadc analog input channel 6 of group 5 ds3pd dsadc: positive analog input of channel 3, pin d u7 an47 i d / highz / vddm analog input 47 vadcg5.7 vadc analog input channel 7 of group 5 ds3nd dsadc: negative analog input channel 3, pin d ak7 an48 i d / highz / vddm analog input 48 vadcg8.0 vadc analog input channel 0 of group 8 aj7 an49 i d / highz / vddm analog input 49 vadcg8.1 vadc analog input channel 1 of group 8 (md) aj6 an50 i d / highz / vddm analog input 50 vadcg8.2 vadc analog input channel 2 of group 8 (md) ak6 an51 i d / highz / vddm analog input 51 vadcg8.3 vadc analog input channel 3 of group 8 (with pull down diagnostics) aj5 an52 i d / highz / vddm analog input 52 vadcg8.4 vadc analog input channel 4 of group 8 ds6pa dsadc: positive analog input of channel 6, pin a ak5 an53 i d / highz / vddm analog input 53 vadcg8.5 vadc analog input channel 5 of group 8 ds6na dsadc: negative analog input channel 6, pin a aj4 an54 i d / highz / vddm analog input 5 vadcg8.6 vadc analog input channel 6 of group 8 ds6pb dsadc: positive analog input of channel 6, pin b ak4 an55 i d / highz / vddm analog input 50 vadcg8.7 vadc analog input channel 7 of group 8 ds6nb dsadc: negative analog input channel 6, pin b af1 an56 i d / highz / vddm analog input 56 vadcg9.0 vadc analog input channel 0 of group 9 af2 an57 i d / highz / vddm analog input 57 vadcg9.1 vadc analog input channel 1 of group 9 (md) ae2 an58 i d / highz / vddm analog input 58 vadcg9.2 vadc analog input channel 2 of group 9 (md) table 2-23 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-112 v 1.1 2015-05 ae1 an59 i d / highz / vddm analog input 59 vadcg9.3 vadc analog input channel 3 of group 9 (with pull down diagnostics) ad1 an60 i d / highz / vddm analog input 60 vadcg9.4 vadc analog input channel 4 of group 9 ds7pa dsadc: positive analog input of channel 7, pin a ad2 an61 i d / highz / vddm analog input 61 vadcg9.5 vadc analog input channel 5 of group 9 ds7na dsadc: negative analog input channel 7, pin a ac2 an62 i d / highz / vddm analog input 62 vadcg9.6 vadc analog input channel 6 of group 9 ds7pb dsadc: positive analog input of channel 7, pin b ac1 an63 i d / highz / vddm analog input 63 vadcg9.7 vadc analog input channel 7 of group 9 ds7nb dsadc: negative analog input channel 7, pin b ab2 an64 i d / highz / vddm analog input 64 vadcg10.0 vadc analog input channel 0 of group 10 ab1 an65 i d / highz / vddm analog input 65 vadcg10.1 vadc analog input channel 1 of group 10 (md) aa2 an66 i d / highz / vddm analog input 66 vadcg10.2 vadc analog input channel 2 of group 10 (md) ds8pb dsadc: positive analog input of channel 8, pin b aa1 an67 i s / highz / vddm analog input 67 vadcg10.3 vadc analog input channel 3 of group 10 (with pull down diagnostics) ds8nb dsadc: negative analog input channel 8, pin b sent10a sent input channel 10, pin a y1 an68 i s / highz / vddm analog input 68 vadcg10.4 vadc analog input channel 4 of group 10 ds8pa dsadc: positive analog input of channel 8, pin a sent11a sent input channel 11, pin a y2 an69 i s / highz / vddm analog input 69 vadcg10.5 vadc analog input channel 5 of group 10 ds8na dsadc: negative analog input channel 8, pin a sent12a sent input channel 12, pin a w1 an70 i s / highz / vddm analog input 70 vadcg10.6 vadc analog input channel 6 of group 10 ds9pa dsadc: positive analog input of channel 9, pin a sent13a sent input channel 13, pin a table 2-23 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-113 v 1.1 2015-05 w2 an71 i s / highz / vddm analog input 71 vadcg10.7 vadc analog input channel 7 of group 10 ds9na dsadc: negative analog input channel 9, pin a sent14a sent input channel 14, pin a table 2-24 system i/o pin symbol ctrl type function m22 porst i porst / pd / vext power on reset input additional strong pd in case of power fail. l21 esr0 i/o mp / od / vext external system request reset 0 default configuration during and after reset is open- drain driver. the driver drives low during power-on reset. this is valid additi onally after deactivation of porst until the internal reset phase has finished. see also scu chapter for details. default after power-on can be different. see also scu chapter reset cont rol unit and scu_iocr register description. evrwup i evr wakeup pin m21 esr1 i/o mp / pu1 / vext external system request reset 1 default nmi function. see also scu chapter reset control unit and scu_iocr register description. evrwup i evr wakeup pin ad22 vgate1p o vgate1p / - / vext external pass device gate control for evr13 aj20 vgate3p o vgate3p / - / vext external pass device gate control for evr33 r21 tms i a2 / pd / vddp3 jtag module state machine control input dap1 i/o device access port line 1 t24 trst i a2 / pd / vddp3 jtag module reset/enable input p21 tck i a2 / pd / vddp3 jtag module clock input dap0 i device access port line 0 table 2-23 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-114 v 1.1 2015-05 u25 xtal1 i xtal1 / - / vddp3 main oscillator/pll/ clock genera tor input u24 xtal2 o xtal2 / - / vddp3 main oscillator/pll/ clock generator output table 2-25 supply pin symbol ctrl type function ae11 varef1 i vx positive analog reference voltage 1 ae12 vagnd1 i vx negative analog reference voltage 1 aa6 varef2 i vx positive analog reference voltage 2 aa7 vagnd2 i vx negative analog reference voltage 2 ae10, aj9, ak9 vddm i vx adc analog power supply (3.3v / 5v) n12, m13 vdd / vddsb i vx emulation device: emulation sram standby power supply (1.3v) (emulation device only). production device: vdd (1.3v). m18, n19, v12, v19, w13, w18 vdd i vx digital core power supply (1.3v) v24 vdd i vx digital core power supply (1.3v). the supply pin inturn supplies the main xtal oscillator/pll (1.3v) . a higher decoupling capacitor is therefore recommended to the vss pin for better noise immunity. a2, b3, f7, g8, ac24, ad25, ah29, aj30 vext i vx external power supply (5v / 3.3v) a29, b28, f24, g23 vddp3 i vx digital power supply for flash (3.3v). can be also used as external 3.3v power supply for vflex. v25 vddp3 i vx digital power supply for oscillator, lvdsh and a2 pads (3.3v). the supply pin inturn supplies the main xtal oscillator/pll (3.3v) . a higher decoupling capacitor is therefore recommended to the vss pin for better noise immunity. k20, j21 vddfl3 i vx flash power supply (3.3v) j10 vflex i vx digital power supply for flex port pads (5v / 3.3v) aj11, ak11, ak20, ak29 vflexe i vx digital power supply for ebu flex port pads (5v / 3.3v) table 2-24 system i/o (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-115 v 1.1 2015-05 j29,j30, ah30 vebu i vx digital power supply for ebu (3.3v) ak8, aj8, ae9 vssm i vx analog ground for vddm aa16 vevrsb i vx standby power supply (3.3v/5v) for the standby sram (cpu0.dspr). if standby mode is not used: to be handled like vext (3.3v/5v). a30, b2, b29, b30, f25, g7, g24, h29, h30, j9, j22, k10, k21, t25, aa21, ab22, ad24, ae25, aj10, aj29, ak10, ak30 vss i vx digital ground (outer balls) w14, w17, v14, v15, v16, v17 vss i vx digital ground (center balls) u12, u13, u15, u16, u18, u19 vss i vx digital ground (center balls) t13, t14, t15, t16, t17, t18 vss i vx digital ground (center balls) r13, r14, r15, r16, r17, r18 vss i vx digital ground (center balls) p12, p13, p15, p16, p18, p19 vss i vx digital ground (center balls) m14, m15, m16, m17, n14, n15, n16, n17 vss i vx digital ground (center balls) w15 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt tx0n w16 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt tx0p t12 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt clkn r12 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt clkp t19 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt err table 2-25 supply (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-116 v 1.1 2015-05 legend: column ? ctrl. ?: i = input (for gpio port lines with iocr bit field selection pcx = 0xxx b ) o = output o0 = output with iocr bit field selection pcx = 1x000 b o1 = output with iocr bit field selection pcx = 1x001 b (alt1) o2 = output with iocr bit field selection pcx = 1x010 b (alt2) o3 = output with iocr bit field selection pcx = 1x011 b (alt3) o4 = output with iocr bit field selection pcx = 1x100 b (alt4) o5 = output with iocr bit field selection pcx = 1x101 b (alt5) o6 = output with iocr bit field selection pcx = 1x110 b (alt6) o7 = output with iocr bit field selection pcx = 1x111 b (alt7) column ? type ?: lp = pad class lp (5v/3.3v, class lp parameters for digital input / output and class d parameters for analog input function) mp = pad class mp (5v/3.3v) mp+ = pad class mp+ (5v/3.3v) mpr = pad class mpr (5v/3.3v) a2 = pad class a2 (3.3v) ak2, ak3, aj1, aj2, aj3, ah1, ah2, ag1, ag2, w30, v1, v2, v29, v30, t1, r1, r2, j1, h1, h2, g29, g30, f29, f30, e1, e2, e29, e30, d1, d2, d29, d30, c1, c2, c29, c30 b1, b4, b6, b9, b10, b14, b17, b20, b21, b25, b26, b27, a3, a4, a8, a9, a10, a17, a21, a25, a26, a27, a28 nc i nc not connected. these pins are reserved for future extensio ns and shall not be connected externally. r19 nc / vddpsb i ncvdd psb emulation device: power supply (3.3v) for dap/jtag pad group. can be connected to vddp or can be left unsupplied (see document aurixed / aurix emulation devi ces specification. production device: this pin is not connected on package level. it can be connected on pcb level to vddp or ground or can be left unsupplied. a1, f6, ak1, ae6, ab9 nc i nc1 not connected. these pins are not connected on package level and will not be used for future extensions. table 2-25 supply (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-117 v 1.1 2015-05 lvdsm = pad class lvdsm (5v/3.3v) lvdsh = pad class lvdsh (3.3v) s = pad class s (class s parameters for digital input and class d parameters for analog input function) d = pad class d (vadc / dsadc) pu = with pull-up device connected during reset (porst = 0) pu1 = with pull-up device connected during reset (porst = 0) 1) 2) 3) pd = with pull-down device connected during reset (porst = 0) pd1 = with pull-down device connected during reset (porst = 0) 1) 2) 3) px = behavior depends on usage: pd in evr13 smps mode and pu1 in gpio mode od = open drain during reset (porst = 0) highz = tri-state during reset (porst = 0) porst = porst input pad xtal1 = xtal1 input pad xtal2 = xtal2 input pad vgate1p = vgate1p vgate3p = vgate3p vx = supply nc = these pins are reserved for future extensions and shall not be connected externally nc1 = these pins are not connecte d on package level and will not be used for future extensions ncvddpsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. ncvddsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. 2.1.2 emergency stop function the emergency stop function can be used to force gpios (g eneral purpose inputs/outputs) via an external input signal (emgstopa or emgstopb) into a defined state: ? input state and ? pu or high-z depending on hwcfg[6] level latched during porst active control of the emergency stop function: ? the emergency stop function can be enabled/disable d in the scu (see chapter ?scu?, ?emergency stop control?) ? the emergency stop input signal, emgstopa (p33.8) / emgsto pb (p21.2) , can selected in the scu (see chapter ?scu?, ?emergency stop control?) ? on port level, each gpio can be enabled/disabled fo r the emergency stop function via the px_esr (port x emergency stop) registers in the port control logic (s ee chapter ?general purpose i/o ports and peripheral i/o lines?, ?emergency stop register?). the emergency stop function is available for all gpio ports with th e following exceptions: ? not available for p20.2 (general purpose input/gpi only, overlayed with testmode) ? not available for p40.x (analoge input anx overlayed with gpi) ? not available for p32.0 evr13 smps mode. 1) the default state of gpios (p x.y) during and after porst active is contro llled via hwcfg[6] (p14.4). hwcfg[6] has a weak internal pull-up active at start-up if the pin is le ft unconnected.see also users manual, ?introduction chapter?, ?general purpose i/o ports and peripheral i/o lines?, figur e: ?default state of port pins during and after reset?. 2) if hwcfg[6] is left unconnected or is externally pulled high, weak internal pull-ups (pu1) / pull-downs (pd1) are active during and after reset. 3) if hwcfg[6] is connected to ground, the pd1 / pu1 pins are predominantly in highz during and after reset. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc299x pin definition and functions: data sheet 2-118 v 1.1 2015-05 ? not available for dedicated i/o without general purpose output function (e.g esrx, tms, tck) the emergency stop function can be ov erruled on the following gpio ports: ? p00.x and p02.x: emergency stop can be overruled by the 8-bit standby controller (sbr), if implemented. overruling can be disabled via the control registers p00_scr / p02_scr (see chapter ?general purpose i/o ports and peripheral i/o lines?, p00 / p01) ? p00.x: emergency stop can be overruled by the vadc. overruling can be disabled via the control register p00_scr (see chapter ?general purpose i/ o ports and peripheral i/o lines?, p00) ? p14.0 and p14.1: emergency stop can be overruled in the dxcpl mode (dap over can physical layer mode). no overruling in the dxcm (debug over can message) mode ? p21.6: emergency stop can be overruled in jtag mode if this pin is used as tdi ? p21.7: emergency stop can be overruled in jtag or three pin dap mode ? p20.0: emergency stop can be overruled in jt ag mode if this gpio is used as tdi ? p33.8: emergency stop can be overruled if this pin is used as safety output pin (smufsp) 2.1.3 pull-up/pull-down r eset behavior of the pins in case of leakage test (porst = 0 and testmode = 0), the pull-down of the trst pin is switched off. in case of an user application (testmode = 1), the pull-down of the trst is always switched on. table 2-26 list of pull-up/pull-down reset behavior of the pins pins porst = 0 porst = 1 all gpios pull-up if hwcfg[6] = 1 or high-z if hwcfg[6] = 0 tdi , testmode pull-up porst 1) 1) pull-down with i porst relevant is always activated when a pr imary supply monitor detects a violation. pull-down with i porst relevant pull-down with i pdli relevant trst , tck, tms pull-down esr0 the open-drain driver is used to drive low. 2) 2) valid additionally after deactivation of porst until the inter nal reset phase has finished. see the scu chapter for details. pull-up 3) 3) see the scu_iocr register description. esr1 pull-up 3) tdo pull-up high-z/pull-up 4) 4) depends on jtag/dap selection with trst . tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-119 v 1.1 2015-05 2.2 tc298x pin definition and functions: bga416 figure 2-2 is showing the tc298x logic symbol for the package variant: bga416. figure 2-2 tc298x logic symbol fo r the package variant bga416. 1 2 3 4 5 6 7 8 9 10111213141516 17 18 19 20 21 22 a nc p10.15 p10.11 p10.8 p11.3 p10.5 p10.2 p10.4 p10.0 p11.7 p12.0 p13.14 p13.10 p14.8 p14.12 p13.6 p13.5 v ddfl3 p14.11 p15.7 p15.4 esr1 b p02.1 p02.0 p10.13 p10.7 p11.9 p10.9 p10.3 p10.1 p11.13 p11.5 p12.1 p13.12 p13.11 p14.15 p14.14 p13.7 p13.4 v ddfl3 p14.13 p15.6 p15.2 po rst c p02.4 p02.11 p10.14 p10.10 p11.12 p11.6 p11.15 p11.14 p11.8 p11.4 p11.1 p13.9 p14.6 p14.3 p14.10 p13.3 p13.0 p13.1 p14.9 p14.5 p14.0 p15.1 d p02.13 p02.15 p02.12 p02.5 p11.10 p11.11 v flex v ss v dd p11.2 p11.0 p14.7 p14.4 v ex tv ss p15.8 p13.2 p15.3 p15.5 p14.2 p14.1 v ex t e p02.14 p02.2 p01.7 p02.9 e 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 e f p01. 0 p02.3 p01.6 p02.10 f f g p01. 2 p10.6 p01.4 p01.5 g g h p02.7 p02.6 p01.3 v dd h h j p01.9 p01.1 p02.8 v ss j 10 11 12 13 14 15 16 17 j k p01.11 p01.10 p01.8 v ex t kk v ss v ss v ss v ss v ss v ss v ss v ss kk l p01.15 p01.14 p01.13 p01.12 ll v ss v ss v ss v ss v ss v ss v ss v ss ll m p00.3 p00.2 p00.1 p00.0 mm v ss v ss v ss v ss v ss v ss v ss v ss mm n p00.10 p00.9 p00.5 p00.4 nn v ss v ss v ss v ss v ss v ss v ss v ss nn p p00.12 p00.11 p00.13 p00.15 pp vss (agbt clkp) v ss v ss v ss v ss v ss v ss nc (v ddpsb) pp r nc / v ddsb p00.14 p00.6 nc / v ddsb rr vss (agbt cl kn) v ss v ss v ss v ss v ss v ss vss (agbt err) rr t a n42 p00.8 p00.7 v ss tt v ss v ss v ss v ss v ss v ss v ss v ss tt u a n43 a n70 a n41 a n40 uu v ss v ss vss (agbt tx0n) vss (agbt tx0p) v ss v ss v ss v ss uu v a n71 a n68 a n37 a n36 v 10 11 12 13 14 15 16 17 v w a n69 a n64 a n32 v a ref2 w w y a n65 a n60 a n33 v a g nd2 y y a a a n61 a n26 a n5 a n56 a a aa a b a n28 a n27 a n57 a n7 a b 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ab a c a n29 a n4 a n16 a n8 a n0 v a g nd1 a n24 a n20 p34.1 p34.2 p33.0 p33.4 p33.14 p32.4 p33.7 v ex tv g a te1p v flex ev ss v dd v g a te3p v flex e a d a n6 a n48 a n17 a n9 a n1 v a ref1 a n25 a n21 v ev rsb p34.4 p33.1 p33.5 p33.15 p32.5 p33.8 v ex t p32.0 p31.0 p31.3 p31.6 p31.9 p31.12 a e a n49 a n18 a n10 a n2 v ddm a n52 a n54 a n22 v ddm p34.5 p33.2 p33.6 p32.2 p33.10 p33.13 v ex t p32.6 p31.1 p31.4 p31.7 p31.10 p31.13 a f nc a n19 a n11 a n3 v ssm a n53 a n55 a n23 v ssm p34.3 p33.3 p33.9 p32.3 p33.11 p33.12 v ex t p32.7 p31.2 p31.5 p31.8 p31.11 p30.0 1 2 3 4 5 6 7 8 9 10111213141516 17 18 19 20 21 22 top-vi ew 23 24 25 26 esr0 p20. 0 v ex tv ss a p20. 2 v ex tv ss v dd b v ex tv ss v dd p21. 5 c v ss v dd p21. 7 p21. 4 d v dd tck p21. 6 v ddp3 e trst tm sv ss v dd f p21.3 p21.1 x ta l2 x ta l1 g p21. 2 v ddp3 v ddp3 v ddp3 h p21.0 p22.1 p22.2 p22.3 j p22.0 p23.4 p23.5 p23.6 k v ss p23.1 p23.2 p23.3 l v ebu p24.14 p24.15 p23.0 m p24.10 p24.11 p24.12 p24.13 n v dd p24.7 p24.8 p24.9 p v ss p24.4 p24.5 p24.6 r v ebu p24.1 p24.2 p24.3 t p24.0 p25.13 p25.14 p25.15 u v dd p25.10 p25.11 p25.12 v v ss p25.7 p25.8 p25.9 w v ebu p25.3 p25.4 p25.5 y p25.2 p25.1 p26.0 p25.0 a a v dd p30.2 p30.7 p30.12 a b v ss p30.3 p30.8 p30.13 a c p31.14 p30.4 p30.9 p30.14 a d p31.15 p30.5 p30.10 p30.15 a e p30.1 p30.6 p30.11 nc a f 23 24 25 26 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-120 v 1.1 2015-05 2.2.1 tc298x bga416 package va riant pin configuration table 2-27 port 00 functions pin symbol ctrl type function m4 p00.0 i mp / pu1 / vext general-purpose input tin9 gtm input ctrapa ccu61 input t12hre ccu60 input inj00 msc0 input cifd9 cif input p00.0 o0 general-purpose output tout9 o1 gtm output asclk3 o2 asclin3 output atx3 o3 asclin3 output ? o4 reserved txdcan1 o5 can node 1 output ? o6 reserved cout63 o7 ccu60 output ethmdioa hwou t eth input/output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-121 v 1.1 2015-05 m3 p00.1 i lp / pu1 / vext general-purpose input tin10 gtm input arx3e asclin3 input rxdcan1d can node 1 input psirx0a psi5 input sent0b sent input cc60inb ccu60 input cc60ina ccu61 input dscin5a dsadc channel 5 input ds5na dsadc positive analog input of channel channel 5, pin a dscin7b dsadc channel 7 input vadcg7.5 vadc analog input channel 5 of group 7 cifd10 cif input p00.1 o0 general-purpose output tout10 o1 gtm output atx3 o2 asclin3 output ? o3 reserved dscout5 o4 dsadc channel 5 output dscout7 o5 dsadc channel 7 output spc0 o6 sent output cc60 o7 ccu61 output m2 p00.2 i lp / pu1 / vext general-purpose input tin11 gtm input sent1b sent input dsdin5a dsadc channel 5 input dsdin7b dsadc channel 7 input ds5pa dsadc negative analog input of channel 5, pin a vadcg7.4 vadc analog input channel 4 of group 7 cifd11 cif input p00.2 o0 general-purpose output tout11 o1 gtm output asclk3 o2 asclin3 output txdcanr1 o3 can node 1 output (multicanr+) psitx0 o4 psi5 output txdcan3 o5 can node 3 output slso34 o6 qspi3 output cout60 o7 ccu61 output table 2-27 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-122 v 1.1 2015-05 m1 p00.3 i lp / pu1 / vext general-purpose input tin12 gtm input rxdcan3a can node 3 input rxdcanr1a can node 1 input (multicanr+) psirx1a psi5 input psisrxa psi5-s input sent2b sent input cc61inb ccu60 input cc61ina ccu61 input dscin3a dsadc channel 3 input vadcg7.3 vadc analog input channel 3 of group 7 dsitr5f dsadc channel 5 input cifd12 cif input p00.3 o0 general-purpose output tout12 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved dscout3 o4 dsadc channel 3 output ? o5 reserved spc2 o6 sent output cc61 o7 ccu61 output n4 p00.4 i lp / pu1 / vext general-purpose input tin13 gtm input req7 scu input sent3b sent input dsdin3a dsadc channel 3 input dssgna dsadc channel input vadcg7.2 vadc analog input channel 2 of group 7 (md) cifd13 cif input p00.4 o0 general-purpose output tout13 o1 gtm output psistx o2 psi5-s output ? o3 reserved psitx1 o4 psi5 output vadcg4bfl0 o5 vadc output spc3 o6 sent output cout61 o7 ccu61 output table 2-27 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-123 v 1.1 2015-05 n3 p00.5 i lp / pu1 / vext general-purpose input tin14 gtm input psirx2a psi5 input sent4b sent input cc62inb ccu60 input cc62ina ccu61 input dscin2a dsadc channel 2 input vadcg7.1 vadc analog input channel 1 of group 7 (md) cifd14 cif input p00.5 o0 general-purpose output tout14 o1 gtm output dscgpwmn o2 dsadc output slso33 o3 qspi3 output dscout2 o4 dsadc channel 2 output vadcg4bfl1 o5 vadc output spc4 o6 sent output cc62 o7 ccu61 output r3 p00.6 i lp / pu1 / vext general-purpose input tin15 gtm input sent5b sent input dsdin2a dsadc channel 2 input a vadcg7.0 vadc analog input channel 0 of group 7 (with pull down diagnostics) dsitr4f dsadc channel 4 input f cifd15 cif input p00.6 o0 general-purpose output tout15 o1 gtm output dscgpwmp o2 dsadc output vadcg4bfl2 o3 vadc output psitx2 o4 psi5 output vadcemux10 o5 vadc output spc5 o6 sent output cout62 o7 ccu61 output table 2-27 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-124 v 1.1 2015-05 t3 p00.7 i lp / pu1 / vext general-purpose input tin16 gtm input sent6b sent input cc60inc ccu61 input ccpos0a ccu61 input t12hrb ccu60 input t2ina gpt120 input dscin4a dsadc channel 4 input a ds4na dsadc negative analog input channel 4, pin a vadcg6.5 vadc analog input channel 5 of group 6 cifclk cif input p00.7 o0 general-purpose output tout16 o1 gtm output ? o2 reserved vadcg4bfl3 o3 vadc output dscout4 o4 dsadc channel 4 output vadcemux11 o5 vadc output spc6 o6 sent output cc60 o7 ccu61 output t2 p00.8 i lp / pu1 / vext general-purpose input tin17 gtm input sent7b sent input cc61inc ccu61 input ccpos1a ccu61 input t13hrb ccu60 input t2euda gpt120 input dsdin4a dsadc channel 4 input a ds4pa dsadc positive analog input of channel 4, pin a vadcg6.4 vadc analog input channel 4 of group 6 cifvsnc cif input p00.8 o0 general-purpose output tout17 o1 gtm output slso36 o2 qspi3 output ? o3 reserved ? o4 reserved vadcemux12 o5 vadc output spc7 o6 sent output cc61 o7 ccu61 output table 2-27 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-125 v 1.1 2015-05 n2 p00.9 i lp / pu1 / vext general-purpose input tin18 gtm input sent8b sent input cc62inc ccu61 input ccpos2a ccu61 input t13hrc ccu60 input t12hrc ccu60 input t4euda gpt120 input dscin1a dsadc channel 1 input a vadcg6.3 vadc analog input channel 3 of group 6 dsitr3f dsadc channel 3 input f cifhsnc cif input p00.9 o0 general-purpose output tout18 o1 gtm output slso37 o2 qspi3 output arts3 o3 asclin3 output dscout1 o4 dsadc channel 1 output ? o5 reserved spc8 o6 sent output cc62 o7 ccu61 output n1 p00.10 i lp / pu1 / vext general-purpose input tin19 gtm input sent9b sent input dsdin1a dsadc channel 1 input a vadcg6.2 vadc analog input channel 2 of group 6 (md) p00.10 o0 general-purpose output tout19 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved spc9 o6 sent output cout63 o7 ccu61 output table 2-27 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-126 v 1.1 2015-05 p2 p00.11 i lp / pu1 / vext general-purpose input tin20 gtm input ctrapa ccu60 input t12hre ccu61 input dscin0a dsadc channel 0 input a vadcg6.1 vadc analog input channel 1 of group 6 (md) p00.11 o0 general-purpose output tout20 o1 gtm output ? o2 reserved ? o3 reserved dscout0 o4 dsadc channel 0 output ? o5 reserved ? o6 reserved ? o7 reserved p1 p00.12 i lp / pu1 / vext general-purpose input tin21 gtm input acts3a asclin3 input dsdin0a dsadc channel 0 input a vadcg6.0 vadc analog input channel 0 of group 6 p00.12 o0 general-purpose output tout21 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cout63 o7 ccu61 output p3 p00.13 i mp+ / pu1 / vext general-purpose input tin167 gtm input dsdin6a dsadc channel 6 input a p00.13 o0 general-purpose output tout167 o1 gtm output ? o2 reserved ? o3 reserved extclk1 o4 scu output ? o5 reserved ? o6 reserved ? o7 reserved table 2-27 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-127 v 1.1 2015-05 r2 p00.14 i lp / pu1 / vext general-purpose input tin166 gtm input dscin6a dsadc channel 6 input a p00.14 o0 general-purpose output tout166 o1 gtm output ? o2 reserved ? o3 reserved dscout6 o4 dsadc channel 6 output ? o5 reserved ? o6 reserved ? o7 reserved p4 p00.15 i mp+ / pu1 / vext general-purpose input tin168 gtm input dsitr6f dsadc channel 6 input f p00.15 o0 general-purpose output tout168 o1 gtm output ? o2 reserved ? o3 reserved extclk0 o4 scu output ? o5 reserved ? o6 reserved ? o7 reserved table 2-28 port 01 functions pin symbol ctrl type function f1 p01.0 i lp / pu1 / vext general-purpose input tin155 gtm input dsitr6e dsadc channel 6 input e rxdcan3f can node 3 input rxdcanr1e can node 1 input (multicanr+) p01.0 o0 general-purpose output tout155 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-27 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-128 v 1.1 2015-05 j2 p01.1 i lp / pu1 / vext general-purpose input tin159 gtm input dsitr8e dsadc channel 8 input e rxd1a1 eray1 input sent10b sent input p01.1 o0 general-purpose output tout159 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved g1 p01.2 i lp / pu1 / vext general-purpose input tin156 gtm input dscin7a dsadc channel 7 input a p01.2 o0 general-purpose output tout156 o1 gtm output ? o2 reserved txdcan3 o3 can node 3 output ? o4 reserved txdcanr1 o5 can node 1 output (multicanr+) dscout7 o6 dsadc channel 7 output ? o7 reserved h3 p01.3 i lp / pu1 / vext general-purpose input tin111 gtm input slsi3b qspi3 input dsitr7f dsadc channel 7 input f p01.3 o0 general-purpose output tout111 o1 gtm output ? o2 reserved ? o3 reserved slso39 o4 qspi3 output txdcan1 o5 can node 1 output ? o6 reserved ? o7 reserved table 2-28 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-129 v 1.1 2015-05 g3 p01.4 i lp / pu1 / vext general-purpose input tin112 gtm input rxdcan1c can node 1 input dsitr7e dsadc channel 7 input e p01.4 o0 general-purpose output tout112 o1 gtm output ? o2 reserved ? o3 reserved slso310 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved g4 p01.5 i lp / pu1 / vext general-purpose input tin113 gtm input mrst3c qspi3 input dscin8a dsadc channel 8 input a p01.5 o0 general-purpose output tout113 o1 gtm output ? o2 reserved ? o3 reserved mrst3 o4 qspi3 output ? o5 reserved dscout8 o6 dsadc channel 8 output ? o7 reserved f3 p01.6 i mp / pu1 / vext general-purpose input tin114 gtm input mtsr3c qspi3 input dsdin8a dsadc channel 8 input a p01.6 o0 general-purpose output tout114 o1 gtm output ? o2 reserved ? o3 reserved mtsr3 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-28 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-130 v 1.1 2015-05 e3 p01.7 i mp / pu1 / vext general-purpose input tin115 gtm input sclk3c qspi3 input dsitr8f dsadc channel 8 input f p01.7 o0 general-purpose output tout115 o1 gtm output ? o2 reserved ? o3 reserved sclk3 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved k3 p01.8 i lp / pu1 / vext general-purpose input tin162 gtm input dsdin9a dsadc channel 9 input a sent12b sent input arx0c asclin0 input rxdcan0f can node 0 input rxdcanr0e can node 0 input (multicanr+) rxd1b1 eray1 input p01.8 o0 general-purpose output tout162 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-28 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-131 v 1.1 2015-05 j1 p01.9 i lp / pu1 / vext general-purpose input tin160 gtm input dscin9a dsadc channel 9 input a sent11b sent input p01.9 o0 general-purpose output tout160 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved dscout9 o6 dsadc channel 9 output ? o7 reserved k2 p01.10 i lp / pu1 / vext general-purpose input tin163 gtm input dsitr9f dsadc channel 9 input f sent13b sent input p01.10 o0 general-purpose output tout163 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved k1 p01.11 i lp / pu1 / vext general-purpose input tin165 gtm input dsitr9e dsadc channel 9 input e sent14b sent input p01.11 o0 general-purpose output tout165 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-28 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-132 v 1.1 2015-05 l4 p01.12 i mp+ / pu1 / vext general-purpose input tin158 gtm input p01.12 o0 general-purpose output tout158 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved txd1a o6 eray1 output ? o7 reserved l3 p01.13 i mp+ / pu1 / vext general-purpose input tin161 gtm input p01.13 o0 general-purpose output tout161 o1 gtm output atx0 o2 asclin0 output ? o3 reserved txdcan0 o4 can node 0 output txdcanr0 o5 can node 0 output (multicanr+) txd1b o6 eray1 output ? o7 reserved l2 p01.14 i mp+ / pu1 / vext general-purpose input tin164 gtm input p01.14 o0 general-purpose output tout164 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved txen1a o6 eray1 output ? o7 reserved table 2-28 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-133 v 1.1 2015-05 l1 p01.15 i lp / pu1 / vext general-purpose input tin157 gtm input dsdin7a dsadc channel 7 input a p01.15 o0 general-purpose output tout157 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-29 port 02 functions pin symbol ctrl type function b2 p02.0 i mp+ / pu1 / vext general-purpose input tin0 gtm input req6 scu input arx2g asclin2 input cc60ina ccu60 input cc60inb ccu61 input cifd0 cif input p02.0 o0 general-purpose output tout0 o1 gtm output atx2 o2 asclin2 output slso31 o3 qspi3 output dscgpwmn o4 dsadc output txdcan0 o5 can node 0 output txd0a o6 eray0 output cc60 o7 ccu60 output table 2-28 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-134 v 1.1 2015-05 b1 p02.1 i lp / pu1 / vext general-purpose input tin1 gtm input req14 scu input arx2b asclin2 input rxdcan0a can node 0 input rxd0a2 eray0 input cifd1 cif input p02.1 o0 general-purpose output tout1 o1 gtm output slso47 o2 qspi4 output slso32 o3 qspi3 output dscgpwmp o4 dsadc output ? o5 reserved ? o6 reserved cout60 o7 ccu60 output e2 p02.2 i mp+ / pu1 / vext general-purpose input tin2 gtm input cc61ina ccu60 input cc61inb ccu61 input cifd2 cif input p02.2 o0 general-purpose output tout2 o1 gtm output atx1 o2 asclin1 output slso33 o3 qspi3 output psitx0 o4 psi5 output txdcan2 o5 can node 2 output txd0b o6 eray0 output cc61 o7 ccu60 output table 2-29 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-135 v 1.1 2015-05 f2 p02.3 i lp / pu1 / vext general-purpose input tin3 gtm input arx1g asclin1 input rxdcan2b can node 2 input rxd0b2 eray0 input psirx0b psi5 input dscin5b dsadc channel 5 input b sdi11 msc1 input cifd3 cif input p02.3 o0 general-purpose output tout3 o1 gtm output aslso2 o2 asclin2 output slso34 o3 qspi3 output dscout5 o4 dsadc channel 5 output ? o5 reserved ? o6 reserved cout61 o7 ccu60 output c1 p02.4 i mp+ / pu1 / vext general-purpose input tin4 gtm input slsi3a qspi3 input ectt1 ttcan input rxdcan0d can node 0 input cc62ina ccu60 input cc62inb ccu61 input dsdin5b dsadc channel 5 input b sda0a i2c0 input cifd4 cif input p02.4 o0 general-purpose output tout4 o1 gtm output asclk2 o2 asclin2 output slso30 o3 qspi3 output psisclk o4 psi5-s output sda0 o5 i2c0 output txen0a o6 eray0 output cc62 o7 ccu60 output table 2-29 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-136 v 1.1 2015-05 d4 p02.5 i mp+ / pu1 / vext general-purpose input tin5 gtm input mrst3a qspi3 input ectt2 ttcan input psirx1b psi5 input psisrxb psi5-s input sent3c sent input dscin4b dsadc channel 4 input b scl0a i2c0 input cifd5 cif input p02.5 o0 general-purpose output tout5 o1 gtm output txdcan0 o2 can node 0 output mrst3 o3 qspi3 output dscout4 o4 dsadc channel 4 output scl0 o5 i2c0 output txen0b o6 eray0 output cout62 o7 ccu60 output h2 p02.6 i mp / pu1 / vext general-purpose input tin6 gtm input mtsr3a qspi3 input sent2c sent input cc60inc ccu60 input ccpos0a ccu60 input t12hrb ccu61 input t3ina gpt120 input cifd6 cif input dsdin4b dsadc channel 4 input b dsitr5e dsadc channel 5 input e p02.6 o0 general-purpose output tout6 o1 gtm output psistx o2 psi5-s output mtsr3 o3 qspi3 output psitx1 o4 psi5 output vadcemux00 o5 vadc output ? o6 reserved cc60 o7 ccu60 output table 2-29 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-137 v 1.1 2015-05 h1 p02.7 i mp / pu1 / vext general-purpose input tin7 gtm input sclk3a qspi3 input psirx2b psi5 input sent1c sent input cc61inc ccu60 input ccpos1a ccu60 input t13hrb ccu61 input t3euda gpt120 input cifd7 cif input dscin3b dsadc channel 3 input b dsitr4e dsadc channel 4 input e p02.7 o0 general-purpose output tout7 o1 gtm output ? o2 reserved sclk3 o3 qspi3 output dscout3 o4 dsadc channel 3 output vadcemux01 o5 vadc output spc1 o6 sent output cc61 o7 ccu60 output table 2-29 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-138 v 1.1 2015-05 j3 p02.8 i lp / pu1 / vext general-purpose input tin8 gtm input sent0c sent input cc62inc ccu60 input ccpos2a ccu60 input t12hrc ccu61 input t13hrc ccu61 input t4ina gpt120 input cifd8 cif input dsdin3b dsadc channel 3 input b dsitr3e dsadc channel 3 input e p02.8 o0 general-purpose output tout8 o1 gtm output slso35 o2 qspi3 output ? o3 reserved psitx2 o4 psi5 output vadcemux02 o5 vadc output ethmdc o6 eth output cc62 o7 ccu60 output e4 p02.9 i lp / pu1 / vext general-purpose input tin116 gtm input p02.9 o0 general-purpose output tout116 o1 gtm output atx2 o2 asclin2 output ? o3 reserved ? o4 reserved txdcan1 o5 can node 1 output ? o6 reserved ? o7 reserved table 2-29 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-139 v 1.1 2015-05 f4 p02.10 i lp / pu1 / vext general-purpose input tin117 gtm input arx2c asclin2 input rxdcan1e can node 1 input p02.10 o0 general-purpose output tout117 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved c2 p02.11 i lp / pu1 / vext general-purpose input tin118 gtm input p02.11 o0 general-purpose output tout118 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved d3 p02.12 i lp / pu1 / vext general-purpose input tin151 gtm input p02.12 o0 general-purpose output tout151 o1 gtm output slso35 o2 qspi3 output slso44 o3 qspi4 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-29 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-140 v 1.1 2015-05 d1 p02.13 i lp / pu1 / vext general-purpose input tin153 gtm input p02.13 o0 general-purpose output tout153 o1 gtm output slso37 o2 qspi3 output slso46 o3 qspi4 output txdcan0 o4 can node 0 output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved ? o7 reserved e1 p02.14 i lp / pu1 / vext general-purpose input tin154 gtm input rxdcan0h can node 0 input rxdcanr0d can node 0 input (multicanr+) p02.14 o0 general-purpose output tout154 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved d2 p02.15 i mp+ / pu1 / vext general-purpose input tin152 gtm input p02.15 o0 general-purpose output tout152 o1 gtm output slso36 o2 qspi3 output slso45 o3 qspi4 output ? o4 reserved ? o5 reserved txen1b o6 eray1 output ? o7 reserved table 2-29 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-141 v 1.1 2015-05 table 2-30 port 10 functions pin symbol ctrl type function a9 p10.0 i lp / pu1 / vext general-purpose input tin102 gtm input t6eudb gpt120 input p10.0 o0 general-purpose output tout102 o1 gtm output ? o2 reserved slso110 o3 qspi1 output ? o4 reserved vadcg6bfl0 o5 vadc output ? o6 reserved ? o7 reserved b8 p10.1 i mp+ / pu1 / vext general-purpose input tin103 gtm input mrst1a qspi1 input t5eudb gpt120 input p10.1 o0 general-purpose output tout103 o1 gtm output mtsr1 o2 qspi1 output mrst1 o3 qspi1 output en01 o4 msc0 output vadcg6bfl1 o5 vadc output end03 o6 msc0 output ? o7 reserved a7 p10.2 i mp / pu1 / vext general-purpose input tin104 gtm input sclk1a qspi1 input t6inb gpt120 input req2 scu input rxdcan2e can node 2 input sdi01 msc0 input p10.2 o0 general-purpose output tout104 o1 gtm output ? o2 reserved sclk1 o3 qspi1 output en00 o4 msc0 output vadcg6bfl2 o5 vadc output end02 o6 msc0 output ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-142 v 1.1 2015-05 b7 p10.3 i mp / pu1 / vext general-purpose input tin105 gtm input mtsr1a qspi1 input req3 scu input t5inb gpt120 input p10.3 o0 general-purpose output tout105 o1 gtm output vadcg6bfl3 o2 vadc output mtsr1 o3 qspi1 output en00 o4 msc0 output end02 o5 msc0 output txdcan2 o6 can node 2 output ? o7 reserved a8 p10.4 i mp+ / pu1 / vext general-purpose input tin106 gtm input mtsr1c qspi1 input ccpos0c ccu60 input t3inb gpt120 input p10.4 o0 general-purpose output tout106 o1 gtm output ? o2 reserved slso18 o3 qspi1 output mtsr1 o4 qspi1 output en00 o5 msc0 output end02 o6 msc0 output ? o7 reserved table 2-30 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-143 v 1.1 2015-05 a6 p10.5 i lp / pu1 / vext general-purpose input tin107 gtm input hwcfg4 scu input rxdcanr0a can node 0 input (multicanr+) inj01 msc0 input p10.5 o0 general-purpose output tout107 o1 gtm output atx2 o2 asclin2 output slso38 o3 qspi3 output slso19 o4 qspi1 output t6out o5 gpt120 output aslso2 o6 asclin2 output psitx3 o7 psi5 output g2 p10.6 i lp / pu1 / vext general-purpose input tin108 gtm input arx2d asclin2 input mtsr3b qspi3 input psirx3c psi5 input hwcfg5 scu input p10.6 o0 general-purpose output tout108 o1 gtm output asclk2 o2 asclin2 output mtsr3 o3 qspi3 output t3out o4 gpt120 output txdcanr0 o5 can node 0 output (multicanr+) mrst1 o6 qspi1 output vadcg7bfl0 o7 vadc output table 2-30 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-144 v 1.1 2015-05 b4 p10.7 i lp / pu1 / vext general-purpose input tin109 gtm input acts2a asclin2 input mrst3b qspi3 input req4 scu input ccpos1c ccu60 input t3eudb gpt120 input p10.7 o0 general-purpose output tout109 o1 gtm output ? o2 reserved mrst3 o3 qspi3 output vadcg7bfl1 o4 vadc output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved ? o7 reserved a4 p10.8 i lp / pu1 / vext general-purpose input tin110 gtm input sclk3b qspi3 input req5 scu input ccpos2c ccu60 input t4inb gpt120 input rxdcanr0b can node 0 input (multicanr+) p10.8 o0 general-purpose output tout110 o1 gtm output arts2 o2 asclin2 output sclk3 o3 qspi3 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-30 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-145 v 1.1 2015-05 b6 p10.9 i lp / pu1 / vext general-purpose input tin265 gtm input sent10c sent input p10.9 o0 general-purpose output tout265 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved c4 p10.10 i lp / pu1 / vext general-purpose input tin266 gtm input sent11c sent input p10.10 o0 general-purpose output tout266 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a3 p10.11 i lp / pu1 / vext general-purpose input tin269 gtm input sent14c sent input p10.11 o0 general-purpose output tout269 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-30 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-146 v 1.1 2015-05 b3 p10.13 i lp / pu1 / vext general-purpose input tin268 gtm input sent13c sent input p10.13 o0 general-purpose output tout268 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved c3 p10.14 i lp / pu1 / vext general-purpose input tin267 gtm input sent12c sent input p10.14 o0 general-purpose output tout267 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a2 p10.15 i lp / pu1 / vext general-purpose input tin270 gtm input p10.15 o0 general-purpose output tout270 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-30 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-147 v 1.1 2015-05 table 2-31 port 11 functions pin symbol ctrl type function d11 p11.0 i mp+ / pu1 / vflex general-purpose input tin119 gtm input arx3b asclin3 input p11.0 o0 general-purpose output tout119 o1 gtm output atx3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved ethtxd3 o6 eth output ? o7 reserved c11 p11.1 i mp+ / pu1 / vflex general-purpose input tin120 gtm input p11.1 o0 general-purpose output tout120 o1 gtm output asclk3 o2 asclin3 output atx3 o3 asclin3 output ? o4 reserved ? o5 reserved ethtxd2 o6 eth output ? o7 reserved d10 p11.2 i mpr/ pu1 / vflex general-purpose input tin95 gtm input p11.2 o0 general-purpose output tout95 o1 gtm output end03 o2 msc0 output slso05 o3 qspi0 output slso15 o4 qspi1 output en01 o5 msc0 output ethtxd1 o6 eth output cout63 o7 ccu60 output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-148 v 1.1 2015-05 a5 p11.3 i mpr / pu1 / vflex general-purpose input tin96 gtm input mrst1b qspi1 input sdi03 msc0 input p11.3 o0 general-purpose output tout96 o1 gtm output ? o2 reserved mrst1 o3 qspi1 output txd0a o4 eray0 output ? o5 reserved ethtxd0 o6 eth output cout62 o7 ccu60 output c10 p11.4 i mp+ / pu1 / vflex general-purpose input tin121 gtm input ethrxclkb eth input p11.4 o0 general-purpose output tout121 o1 gtm output asclk3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved ethtxer o6 eth output ? o7 reserved b10 p11.5 i lp / pu1 / vflex general-purpose input tin122 gtm input ethtxclka eth input p11.5 o0 general-purpose output tout122 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-31 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-149 v 1.1 2015-05 c6 p11.6 i mpr / pu1 / vflex general-purpose input tin97 gtm input sclk1b qspi1 input p11.6 o0 general-purpose output tout97 o1 gtm output txen0b o2 eray0 output sclk1 o3 qspi1 output txen0a o4 eray0 output fclp0 o5 msc0 output ethtxen o6 eth output cout61 o7 ccu60 output a10 p11.7 i lp / pu1 / vflex general-purpose input tin123 gtm input ethrxd3 eth input p11.7 o0 general-purpose output tout123 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved c9 p11.8 i lp / pu1 / vflex general-purpose input tin124 gtm input ethrxd2 eth input p11.8 o0 general-purpose output tout124 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-31 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-150 v 1.1 2015-05 b5 p11.9 i mp+ / pu1 / vflex general-purpose input tin98 gtm input mtsr1b qspi1 input rxd0a1 eray0 input ethrxd1 eth input p11.9 o0 general-purpose output tout98 o1 gtm output ? o2 reserved mtsr1 o3 qspi1 output ? o4 reserved sop0 o5 msc0 output ? o6 reserved cout60 o7 ccu60 output d5 p11.10 i lp / pu1 / vflex general-purpose input tin99 gtm input req12 scu input arx1e asclin1 input slsi1a qspi1 input rxdcan3d can node 3 input rxd0b1 eray0 input ethrxd0 eth input sdi00 msc0 input p11.10 o0 general-purpose output tout99 o1 gtm output ? o2 reserved slso03 o3 qspi0 output slso13 o4 qspi1 output ? o5 reserved ? o6 reserved cc62 o7 ccu60 output table 2-31 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-151 v 1.1 2015-05 d6 p11.11 i mp+ / pu1 / vflex general-purpose input tin100 gtm input ethcrsdva eth input ethrxdva eth input ethcrsb eth input p11.11 o0 general-purpose output tout100 o1 gtm output end02 o2 msc0 output slso04 o3 qspi0 output slso14 o4 qspi1 output en00 o5 msc0 output txen0b o6 eray0 output cc61 o7 ccu60 output c5 p11.12 i mpr / pu1 / vflex general-purpose input tin101 gtm input ethrefclk eth input ethtxclkb eth input (not for productive purposes) ethrxclka eth input (not for productive purposes) p11.12 o0 general-purpose output tout101 o1 gtm output atx1 o2 asclin1 output gtmclk2 o3 gtm output txd0b o4 eray0 output txdcan3 o5 can node 3 output extclk1 o6 scu output cc60 o7 ccu60 output table 2-31 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-152 v 1.1 2015-05 b9 p11.13 i lp / pu1 / vflex general-purpose input tin125 gtm input ethrxera eth input sda1a i2c1 input p11.13 o0 general-purpose output tout125 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sda1 o6 i2c1 output ? o7 reserved c8 p11.14 i lp / pu1 / vflex general-purpose input tin126 gtm input ethcrsdvb eth input ethrxdvb eth input ethcrsa eth input scl1a i2c1 input p11.14 o0 general-purpose output tout126 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved scl1 o6 i2c1 output ? o7 reserved c7 p11.15 i lp / pu1 / vflex general-purpose input tin127 gtm input ethcol eth input p11.15 o0 general-purpose output tout127 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-31 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-153 v 1.1 2015-05 table 2-32 port 12 functions pin symbol ctrl type function a11 p12.0 i lp / pu1 / vflex general-purpose input tin128 gtm input ethrxclkc eth input rxdcan0c can node 0 input p12.0 o0 general-purpose output tout128 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdc o6 eth output ? o7 reserved b11 p12.1 i lp / pu1 / vflex general-purpose input tin129 gtm input p12.1 o0 general-purpose output tout129 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved txdcan0 o5 can node 0 output ? o6 reserved ? o7 reserved ethmdioc hwou t eth input/output table 2-33 port 13 functions pin symbol ctrl type function c17 p13.0 i lvdsm_n / pu1 / vext general-purpose input tin91 gtm input p13.0 o0 general-purpose output tout91 o1 gtm output end03 o2 msc0 output sclk2n o3 qspi2 output (lvds) en01 o4 msc0 output fcln0 o5 msc0 output (lvds) fclnd0 o6 msc0 output (lvds) ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-154 v 1.1 2015-05 c18 p13.1 i lvdsm_p / pu1 / vext general-purpose input tin92 gtm input scl0b i2c0 input p13.1 o0 general-purpose output tout92 o1 gtm output ? o2 reserved sclk2p o3 qspi2 output (lvds) ? o4 reserved fclp0 o5 msc0 output (lvds) scl0 o6 i2c0 output ? o7 reserved d17 p13.2 i lvdsm_n / pu1 / vext general-purpose input tin93 gtm input capina gpt120 input sda0b i2c0 input p13.2 o0 general-purpose output tout93 o1 gtm output ? o2 reserved mtsr2n o3 qspi2 output (lvds) fclp0 o4 msc0 output son0 o5 msc0 output (lvds) sda0 o6 i2c0 output sond0 o7 msc0 output (lvds) c16 p13.3 i lvdsm_p / pu1 / vext general-purpose input tin94 gtm input p13.3 o0 general-purpose output tout94 o1 gtm output ? o2 reserved mtsr2p o3 qspi2 output (lvds) ? o4 reserved sop0 o5 msc0 output (lvds) ? o6 reserved ? o7 reserved table 2-33 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-155 v 1.1 2015-05 b17 p13.4 i lvdsm_n / pu1 / vext general-purpose input tin253 gtm input psirx4a psi5 input p13.4 o0 general-purpose output tout253 o1 gtm output end22 o2 msc2 output ? o3 reserved en20 o4 msc2 output fcln2 o5 msc2 output (lvds) fclnd2 o6 msc2 output (lvds) ? o7 reserved a17 p13.5 i lvdsm_p / pu1 / vext general-purpose input tin254 gtm input p13.5 o0 general-purpose output tout254 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved fclp2 o5 msc2 output (lvds) ? o6 reserved ? o7 reserved a16 p13.6 i lvdsm_n / pu1 / vext general-purpose input tin255 gtm input p13.6 o0 general-purpose output tout255 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved son2 o5 msc2 output (lvds) sond2 o6 msc2 output (lvds) ? o7 reserved table 2-33 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-156 v 1.1 2015-05 b16 p13.7 i lvdsm_p / pu1 / vext general-purpose input tin256 gtm input p13.7 o0 general-purpose output tout256 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved sop2 o5 msc2 output (lvds) ? o6 reserved ? o7 reserved c12 p13.9 i mp / pu1 / vext general-purpose input tin248 gtm input scl1b i2c1 input p13.9 o0 general-purpose output tout248 o1 gtm output atx3 o2 asclin3 output slso55 o3 qspi5 output ? o4 reserved txdcanr1 o5 can node 1 output (multicanr+) scl1 o6 i2c1 output ? o7 reserved a13 p13.10 i lp / pu1 / vext general-purpose input tin251 gtm input psirx3a psi5 input p13.10 o0 general-purpose output tout251 o1 gtm output atx0 o2 asclin0 output ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-33 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-157 v 1.1 2015-05 b13 p13.11 i lp / pu1 / vext general-purpose input tin250 gtm input arx0e asclin0 input p13.11 o0 general-purpose output tout250 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved psitx3 o5 psi5 output ? o6 reserved ? o7 reserved b12 p13.12 i lp / pu1 / vext general-purpose input tin249 gtm input arx3h asclin3 input rxdcanr1b can node 1 input (multicanr+) sda1b i2c1 input p13.12 o0 general-purpose output tout249 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sda1 o6 i2c1 output ? o7 reserved a12 p13.14 i lp / pu1 / vext general-purpose input tin252 gtm input p13.14 o0 general-purpose output tout252 o1 gtm output ? o2 reserved slso54 o3 qspi5 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-33 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-158 v 1.1 2015-05 table 2-34 port 14 functions pin symbol ctrl type function c21 p14.0 i mp+ / pu1 / vext general-purpose input tin80 gtm input sent12d sent input p14.0 o0 general-purpose output tout80 o1 gtm output atx0 o2 asclin0 output recommended as boot loader pin txd0a o3 eray0 output txd0b o4 eray0 output txdcan1 o5 can node 1 output used for single pin dap (spd) function asclk0 o6 asclin0 output cout62 o7 ccu60 output d21 p14.1 i mp / pu1 / vext general-purpose input tin81 gtm input req15 scu input sent13d sent input arx0a asclin0 input recommended as boot loader pin rxdcan1b can node 1 input used for single pin dap (spd) function rxd0a3 eray0 input rxd0b3 eray0 input evrwupa scu input p14.1 o0 general-purpose output tout81 o1 gtm output atx0 o2 asclin0 output recommended as boot loader pin. ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cout63 o7 ccu60 output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-159 v 1.1 2015-05 d20 p14.2 i lp / pu1 / vext general-purpose input tin82 gtm input hwcfg2 evr13 scu input latched at cold power on reset to decide evr13 activation. p14.2 o0 general-purpose output tout82 o1 gtm output atx2 o2 asclin2 output slso21 o3 qspi2 output ? o4 reserved ? o5 reserved asclk2 o6 asclin2 output ? o7 reserved c14 p14.3 i lp / pu1 / vext general-purpose input tin83 gtm input arx2a asclin2 input req10 scu input hwcfg3_bmi scu input sdi02 msc0 input p14.3 o0 general-purpose output tout83 o1 gtm output atx2 o2 asclin2 output slso23 o3 qspi2 output aslso1 o4 asclin1 output aslso3 o5 asclin3 output ? o6 reserved ? o7 reserved table 2-34 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-160 v 1.1 2015-05 d13 p14.4 i lp / pu1 / vext general-purpose input tin84 gtm input hwcfg6 scu input latched at cold power on reset to decide default pad reset state (pu or highz). p14.4 o0 general-purpose output tout84 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved c20 p14.5 i mp+ / pu1 / vext general-purpose input tin85 gtm input hwcfg1 evr33 scu input latched at cold power on reset to decide evr33 activation. p14.5 o0 general-purpose output tout85 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved txd0b o6 eray0 output txd1b o7 eray1 output c13 p14.6 i mp+ / pu1 / vext general-purpose input tin86 gtm input hwcfg0 dcldo scu input if evr13 active, latched at cold power on reset to decide between ldo and smps mode. p14.6 o0 general-purpose output tout86 o1 gtm output ? o2 reserved slso22 o3 qspi2 output ? o4 reserved ? o5 reserved txen0b o6 eray0 output txen1b o7 eray1 output table 2-34 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-161 v 1.1 2015-05 d12 p14.7 i lp / pu1 / vext general-purpose input tin87 gtm input rxd0b0 eray0 input rxd1b0 eray1 input p14.7 o0 general-purpose output tout87 o1 gtm output arts0 o2 asclin0 output slso24 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a14 p14.8 i lp / pu1 / vext general-purpose input tin88 gtm input arx1d asclin1 input rxdcan2d can node 2 input rxd0a0 eray0 input rxd1a0 eray1 input p14.8 o0 general-purpose output tout88 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved c19 p14.9 i mp+ / pu1 / vext general-purpose input tin89 gtm input acts0a asclin0 input p14.9 o0 general-purpose output tout89 o1 gtm output end03 o2 msc0 output en01 o3 msc0 output ? o4 reserved txen0b o5 eray0 output txen0a o6 eray0 output txen1a o7 eray1 output table 2-34 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-162 v 1.1 2015-05 c15 p14.10 i mp+ / pu1 / vext general-purpose input tin90 gtm input p14.10 o0 general-purpose output tout90 o1 gtm output end02 o2 msc0 output en00 o3 msc0 output atx1 o4 asclin1 output txdcan2 o5 can node 2 output txd0a o6 eray0 output txd1a o7 eray1 output a19 p14.11 i lp / pu1 / vext general-purpose input tin258 gtm input p14.11 o0 general-purpose output tout258 o1 gtm output end20 o2 msc2 output psitx4 o3 psi5 output en22 o4 msc2 output sop2 o5 msc2 output ? o6 reserved ? o7 reserved a15 p14.12 i lp / pu1 / vext general-purpose input tin261 gtm input sdi20 msc2 input p14.12 o0 general-purpose output tout261 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-34 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-163 v 1.1 2015-05 b19 p14.13 i mp+ / pu1 / vext general-purpose input tin260 gtm input p14.13 o0 general-purpose output tout260 o1 gtm output end23 o2 msc2 output ? o3 reserved en21 o4 msc2 output ? o5 reserved ? o6 reserved ? o7 reserved b15 p14.14 i mp+ / pu1 / vext general-purpose input tin259 gtm input p14.14 o0 general-purpose output tout259 o1 gtm output end22 o2 msc2 output ? o3 reserved en20 o4 msc2 output ? o5 reserved ? o6 reserved ? o7 reserved b14 p14.15 i lp / pu1 / vext general-purpose input tin263 gtm input inj21 msc2 output p14.15 o0 general-purpose output tout263 o1 gtm output atx1 o2 asclin1 output ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-34 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-164 v 1.1 2015-05 table 2-35 port 15 functions pin symbol ctrl type function c22 p15.1 i lp / pu1 / vext general-purpose input tin72 gtm input req16 scu input arx1a asclin1 input rxdcan2a can node 2 input slsi2b qspi2 input evrwupb scu input p15.1 o0 general-purpose output tout72 o1 gtm output atx1 o2 asclin1 output slso25 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved b21 p15.2 i mp / pu1 / vext general-purpose input tin73 gtm input slsi2a qspi2 input mrst2e qspi2 input sent10d sent input hsic2ina qspi2 input p15.2 o0 general-purpose output tout73 o1 gtm output atx0 o2 asclin0 output slso20 o3 qspi2 output ? o4 reserved txdcan1 o5 can node 1 output asclk0 o6 asclin0 output ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-165 v 1.1 2015-05 d18 p15.3 i mp / pu1 / vext general-purpose input tin74 gtm input arx0b asclin0 input sclk2a qspi2 input rxdcan1a can node 1 input hsic2inb qspi2 input p15.3 o0 general-purpose output tout74 o1 gtm output atx0 o2 asclin0 output sclk2 o3 qspi2 output end03 o4 msc0 output en01 o5 msc0 output ? o6 reserved ? o7 reserved a21 p15.4 i mp / pu1 / vext general-purpose input tin75 gtm input mrst2a qspi2 input req0 scu input scl0c i2c0 input sent11d sent input p15.4 o0 general-purpose output tout75 o1 gtm output atx1 o2 asclin1 output mrst2 o3 qspi2 output ? o4 reserved ? o5 reserved scl0 o6 i2c0 output cc62 o7 ccu60 output table 2-35 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-166 v 1.1 2015-05 d19 p15.5 i mp / pu1 / vext general-purpose input tin76 gtm input arx1b asclin1 input mtsr2a qspi2 input req13 scu input sda0c i2c0 input p15.5 o0 general-purpose output tout76 o1 gtm output atx1 o2 asclin1 output mtsr2 o3 qspi2 output end02 o4 msc0 output en00 o5 msc0 output sda0 o6 i2c0 output cc61 o7 ccu60 output b20 p15.6 i mp / pu1 / vext general-purpose input tin77 gtm input mtsr2b qspi2 input p15.6 o0 general-purpose output tout77 o1 gtm output atx3 o2 asclin3 output mtsr2 o3 qspi2 output slso53 o4 qspi5 output sclk2 o5 qspi2 output asclk3 o6 asclin3 output cc60 o7 ccu60 output a20 p15.7 i mp / pu1 / vext general-purpose input tin78 gtm input arx3a asclin3 input mrst2b qspi2 input p15.7 o0 general-purpose output tout78 o1 gtm output atx3 o2 asclin3 output mrst2 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cout60 o7 ccu60 output table 2-35 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-167 v 1.1 2015-05 d16 p15.8 i mp / pu1 / vext general-purpose input tin79 gtm input sclk2b qspi2 input req1 scu input p15.8 o0 general-purpose output tout79 o1 gtm output ? o2 reserved sclk2 o3 qspi2 output ? o4 reserved ? o5 reserved asclk3 o6 asclin3 output cout61 o7 ccu60 output table 2-36 port 20 functions pin symbol ctrl type function a24 p20.0 i mp / pu1 / vext general-purpose input tin59 gtm input rxdcan3c can node 3 input rxdcanr1c can node 1 input (multicanr+) t6euda gpt120 input req9 scu input sysclk hsct input tgi0 ocds input p20.0 o0 general-purpose output tout59 o1 gtm output atx3 o2 asclin3 output asclk3 o3 asclin3 output ? o4 reserved sysclk o5 hsct output ? o6 reserved ? o7 reserved tgo0 hwou t ocds; enx table 2-35 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-168 v 1.1 2015-05 b23 p20.2 i lp / pu / vext general-purpose input this pin is latched at power on reset release to enter test mode. testmode ocds input p20.2 o0 output function not available ? o1 output function not available ? o2 output function not available ? o3 output function not available ? o4 output function not available ? o5 output function not available ? o6 output function not available ? o7 output function not available table 2-37 port 21 functions pin symbol ctrl type function j23 p21.0 i lvdsh_n/ pu1 / vddp3 general-purpose input tin51 gtm input mrst4dn qspi4 input (lvds) hold ebu input p21.0 o0 general-purpose output tout51 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdc o6 eth output baaba0 o7 ebu output (combined for baa and ba0) hsm1 o hsm output table 2-36 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-169 v 1.1 2015-05 g24 p21.1 i lvdsh_p/ pu1 / vddp3 general-purpose input tin52 gtm input ethmdiob eth input (not for production purposes) mrst4dp qspi4 input (lvds) wait ebu input p21.1 o0 general-purpose output tout52 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdio o6 eth output (not for production purposes) breqba1 o7 ebu output (combined for breq and ba1) hsm2 o hsm output h23 p21.2 i lvdsh_n/ pu1 / vddp3 general-purpose input tin53 gtm input mrst2cn qspi2 input (lvds) mrst4cn qspi4 input (lvds) arx3gn asclin3 input (lvds) emgstopb scu input rxdn hsct input (lvds) p21.2 o0 general-purpose output tout53 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved ethmdc o5 eth output sdrama8 o6 ebu output ? o7 reserved table 2-37 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-170 v 1.1 2015-05 g23 p21.3 i lvdsh_p/ pu1 / vddp3 general-purpose input tin54 gtm input mrst2cp qspi2 input (lvds) mrst4cp qspi4 input (lvds) arx3gp asclin3 input (lvds) rxdp hsct input (lvds) p21.3 o0 general-purpose output tout54 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama9 o6 ebu output ? o7 reserved ethmdiod hwout eth input/output d26 p21.4 i lvdsh_n/ pu1 / vddp3 general-purpose input tin55 gtm input p21.4 o0 general-purpose output tout55 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama10 o6 ebu output ? o7 reserved txdn hsct hsct output (lvds) c26 p21.5 i lvdsh_p/ pu1 / vddp3 general-purpose input tin56 gtm input p21.5 o0 general-purpose output tout56 o1 gtm output asclk3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved sdrama11 o6 ebu output ? o7 reserved txdp hsct hsct output (lvds) table 2-37 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-171 v 1.1 2015-05 e25 p21.6 i a2 / pu / vddp3 general-purpose input tin57 gtm input arx3f asclin3 input tgi2 ocds input tdi ocds (jtag) input t5euda gpt120 input p21.6 o0 general-purpose output tout57 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved sysclk o5 hsct output sdrama12 o6 ebu output t3out o7 gpt120 output tgo2 hwout ocds; enx d25 p21.7 i a2 / pu / vddp3 general-purpose input tin58 gtm input dap2 ocds (3-pin dap) input in the 3-pin dap mode this pin is used as dap2. in the 2-pin dap mode this pin is used as p21.7 and controlled by the related port control logic tgi3 ocds input ethrxerb eth input t5ina gpt120 input p21.7 o0 general-purpose output tout58 o1 gtm output atx3 o2 asclin3 output asclk3 o3 asclin3 output ? o4 reserved ? o5 reserved sdrama13 o6 ebu output t6out o7 gpt120 output tgo3 hwout ocds; enx tdo ocds (jtag); enx the jtag tdo function is overlayed with p21.7 via a double bond. in jtag mode this pin is used as tdo, after power-on reset it is highz. dap2 ocds (3-pin dap); enx in the 3-pin dap mode this pin is used as dap2. table 2-37 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-172 v 1.1 2015-05 table 2-38 port 22 functions pin symbol ctrl type function k23 p22.0 i lvdsm_n / pu1 / vext general-purpose input tin47 gtm input mtsr4b qspi4 input p22.0 o0 general-purpose output tout47 o1 gtm output atx3n o2 asclin3 output (lvds) mtsr4 o3 qspi4 output sclk4n o4 qspi4 output (lvds) fcln1 o5 msc1 output (lvds) fclnd1 o6 msc1 output (lvds) ? o7 reserved j24 p22.1 i lvdsm_p / pu1 / vext general-purpose input tin48 gtm input mrst4b qspi4 input p22.1 o0 general-purpose output tout48 o1 gtm output atx3p o2 asclin3 output (lvds) mrst4 o3 qspi4 output sclk4p o4 qspi4 output (lvds) fclp1 o5 msc1 output (lvds) ? o6 reserved ? o7 reserved j25 p22.2 i lvdsm_n / pu1 / vext general-purpose input tin49 gtm input slsi4b qspi4 input p22.2 o0 general-purpose output tout49 o1 gtm output ? o2 reserved slso43 o3 qspi4 output mtsr4n o4 qspi4 output (lvds) son1 o5 msc1 output (lvds) sond1 o6 msc1 output (lvds) ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-173 v 1.1 2015-05 j26 p22.3 i lvdsm_p / pu1 / vext general-purpose input tin50 gtm input sclk4b qspi4 input p22.3 o0 general-purpose output tout50 o1 gtm output ? o2 reserved sclk4 o3 qspi4 output mtsr4p o4 qspi4 output (lvds) sop1 o5 msc1 output (lvds) ? o6 reserved ? o7 reserved table 2-39 port 23 functions pin symbol ctrl type function m26 p23.0 i lp / pu1 / vext general-purpose input tin41 gtm input p23.0 o0 general-purpose output tout41 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved l24 p23.1 i mp+ / pu1 / vext general-purpose input tin42 gtm input sdi10 msc1 input p23.1 o0 general-purpose output tout42 o1 gtm output arts1 o2 asclin1 output slso46 o3 qspi4 output gtmclk0 o4 gtm output ? o5 reserved extclk0 o6 scu output ? o7 reserved table 2-38 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-174 v 1.1 2015-05 l25 p23.2 i lp / pu1 / vext general-purpose input tin43 gtm input p23.2 o0 general-purpose output tout43 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved l26 p23.3 i lp / pu1 / vext general-purpose input tin44 gtm input inj10 msc1 input p23.3 o0 general-purpose output tout44 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved k24 p23.4 i mp+ / pu1 / vext general-purpose input tin45 gtm input p23.4 o0 general-purpose output tout45 o1 gtm output ? o2 reserved slso45 o3 qspi4 output end12 o4 msc1 output en10 o5 msc1 output ? o6 reserved ? o7 reserved table 2-39 port 23 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-175 v 1.1 2015-05 k25 p23.5 i mp+ / pu1 / vext general-purpose input tin46 gtm input p23.5 o0 general-purpose output tout46 o1 gtm output ? o2 reserved slso44 o3 qspi4 output end13 o4 msc1 output en11 o5 msc1 output ? o6 reserved ? o7 reserved k26 p23.6 i lp / pu1 / vext general-purpose input tin138 gtm input p23.6 o0 general-purpose output tout138 o1 gtm output ? o2 reserved ? o3 reserved slso011 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-40 port 24 functions pin symbol ctrl type function u23 p24.0 i a2 / pu1 / vebu general-purpose input tin222 gtm input p24.0 o0 general-purpose output tout222 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq11 hwou t ebu data bus line (sdram) a11 ebu output table 2-39 port 23 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-176 v 1.1 2015-05 t24 p24.1 i a2 / pu1 / vebu general-purpose input tin223 gtm input p24.1 o0 general-purpose output tout223 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq15 hwou t ebu data bus line (sdram) a15 ebu output t25 p24.2 i a2 / pu1 / vebu general-purpose input tin224 gtm input p24.2 o0 general-purpose output tout224 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq14 hwou t ebu data bus line (sdram) a14 ebu output t26 p24.3 i a2 / pu1 / vebu general-purpose input tin225 gtm input p24.3 o0 general-purpose output tout225 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq13 hwou t ebu data bus line (sdram) a13 ebu output table 2-40 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-177 v 1.1 2015-05 r24 p24.4 i a2 / pu1 / vebu general-purpose input tin226 gtm input p24.4 o0 general-purpose output tout226 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq9 hwou t ebu data bus line (sdram) a9 ebu output r25 p24.5 i a2 / pu1 / vebu general-purpose input tin227 gtm input p24.5 o0 general-purpose output tout227 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq12 hwou t ebu data bus line (sdram) a12 ebu output r26 p24.6 i a2 / pu1 / vebu general-purpose input tin228 gtm input p24.6 o0 general-purpose output tout228 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq5 hwou t ebu data bus line (sdram) a5 ebu output table 2-40 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-178 v 1.1 2015-05 p24 p24.7 i a2 / pu1 / vebu general-purpose input tin229 gtm input p24.7 o0 general-purpose output tout229 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq8 hwou t ebu data bus line (sdram) a8 ebu output p25 p24.8 i a2 / pu1 / vebu general-purpose input tin230 gtm input p24.8 o0 general-purpose output tout230 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq10 hwou t ebu data bus line (sdram) a10 ebu output p26 p24.9 i a2 / pu1 / vebu general-purpose input tin231 gtm input p24.9 o0 general-purpose output tout231 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq6 hwou t ebu data bus line (sdram) a6 ebu output table 2-40 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-179 v 1.1 2015-05 n23 p24.10 i a2 / pu1 / vebu general-purpose input tin232 gtm input p24.10 o0 general-purpose output tout232 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq4 hwou t ebu data bus line (sdram) a4 ebu output n24 p24.11 i a2 / pu1 / vebu general-purpose input tin233 gtm input p24.11 o0 general-purpose output tout233 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq3 hwou t ebu data bus line (sdram) a3 ebu output n25 p24.12 i a2 / pu1 / vebu general-purpose input tin234 gtm input p24.12 o0 general-purpose output tout234 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq1 hwou t ebu data bus line (sdram) a1 ebu output table 2-40 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-180 v 1.1 2015-05 n26 p24.13 i a2 / pu1 / vebu general-purpose input tin235 gtm input p24.13 o0 general-purpose output tout235 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq2 hwou t ebu data bus line (sdram) a2 ebu output m24 p24.14 i a2 / pu1 / vebu general-purpose input tin236 gtm input p24.14 o0 general-purpose output tout236 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq0 hwou t ebu data bus line (sdram) a0 ebu output m25 p24.15 i a2 / pu1 / vebu general-purpose input tin237 gtm input p24.15 o0 general-purpose output tout237 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved dq7 hwou t ebu data bus line (sdram) a7 ebu output table 2-40 port 24 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-181 v 1.1 2015-05 table 2-41 port 25 functions pin symbol ctrl type function aa26 p25.0 i a2 / pu1 / vebu general-purpose input tin206 gtm input sdclki ebu input p25.0 o0 general-purpose output tout206 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved bfclko hwou t ebu output sdclko ebu output aa24 p25.1 i a2 / pu1 / vebu general-purpose input tin207 gtm input p25.1 o0 general-purpose output tout207 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved rd hwou t ebu output ras ebu output aa23 p25.2 i a2 / pu1 / vebu general-purpose input tin208 gtm input p25.2 o0 general-purpose output tout208 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved rd/wr hwou t ebu output wr ebu output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-182 v 1.1 2015-05 y24 p25.3 i a2 / pu1 / vebu general-purpose input tin209 gtm input holda ebu input p25.3 o0 general-purpose output tout209 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved baaba0 o7 ebu output (combined for baa and ba0) cs2 hwou t ebu output dqm1 ebu output holda ebu output y25 p25.4 i a2 / pu1 / vebu general-purpose input tin210 gtm input p25.4 o0 general-purpose output tout210 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved cs1 hwou t ebu output dqm0 ebu output y26 p25.5 i a2 / pu1 / vebu general-purpose input tin211 gtm input p25.5 o0 general-purpose output tout211 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved cs0 hwou t ebu output table 2-41 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-183 v 1.1 2015-05 w24 p25.7 i a2 / pu1 / vebu general-purpose input tin213 gtm input p25.7 o0 general-purpose output tout213 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved adv hwou t ebu output cas ebu output w25 p25.8 i a2 / pu1 / vebu general-purpose input tin214 gtm input p25.8 o0 general-purpose output tout214 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a23 o5 ebu output sdrama0 o6 ebu output ? o7 reserved bc0 hwou t ebu output w26 p25.9 i a2 / pu1 / vebu general-purpose input tin215 gtm input p25.9 o0 general-purpose output tout215 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a22 o5 ebu output sdrama1 o6 ebu output ? o7 reserved bc1 hwou t ebu output table 2-41 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-184 v 1.1 2015-05 v24 p25.10 i a2 / pu1 / vebu general-purpose input tin216 gtm input p25.10 o0 general-purpose output tout216 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a21 o5 ebu output sdrama2 o6 ebu output ? o7 reserved bc2 hwou t ebu output v25 p25.11 i a2 / pu1 / vebu general-purpose input tin217 gtm input p25.11 o0 general-purpose output tout217 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved a20 o5 ebu output sdrama3 o6 ebu output ? o7 reserved bc3 hwou t ebu output v26 p25.12 i a2 / pu1 / vebu general-purpose input tin218 gtm input p25.12 o0 general-purpose output tout218 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama4 o6 ebu output ? o7 reserved a19 hwou t ebu output table 2-41 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-185 v 1.1 2015-05 u24 p25.13 i a2 / pu1 / vebu general-purpose input tin219 gtm input p25.13 o0 general-purpose output tout219 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama5 o6 ebu output ? o7 reserved a17 hwou t ebu output u25 p25.14 i a2 / pu1 / vebu general-purpose input tin220 gtm input p25.14 o0 general-purpose output tout220 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama6 o6 ebu output ? o7 reserved a18 hwou t ebu output u26 p25.15 i a2 / pu1 / vebu general-purpose input tin221 gtm input p25.15 o0 general-purpose output tout221 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama7 o6 ebu output ? o7 reserved a16 hwou t ebu output table 2-41 port 25 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-186 v 1.1 2015-05 table 2-42 port 26 functions pin symbol ctrl type function aa25 p26.0 i lp / pu1 / vflexe general-purpose input tin212 gtm input bfclki ebu input p26.0 o0 general-purpose output tout212 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-43 port 30 functions pin symbol ctrl type function af22 p30.0 i mp / pu1 / vflexe general-purpose input tin190 gtm input p30.0 o0 general-purpose output tout190 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad14 hwou t ebu address / data bus line af23 p30.1 i mp / pu1 / vflexe general-purpose input tin191 gtm input p30.1 o0 general-purpose output tout191 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad11 hwou t ebu address / data bus line tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-187 v 1.1 2015-05 ab24 p30.2 i mp / pu1 / vflexe general-purpose input tin192 gtm input p30.2 o0 general-purpose output tout192 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad12 hwou t ebu address / data bus line ac24 p30.3 i mp / pu1 / vflexe general-purpose input tin193 gtm input p30.3 o0 general-purpose output tout193 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad15 hwou t ebu address / data bus line ad24 p30.4 i mp / pu1 / vflexe general-purpose input tin194 gtm input p30.4 o0 general-purpose output tout194 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad8 hwou t ebu address / data bus line table 2-43 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-188 v 1.1 2015-05 ae24 p30.5 i mp / pu1 / vflexe general-purpose input tin195 gtm input p30.5 o0 general-purpose output tout195 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad13 hwou t ebu address / data bus line af24 p30.6 i mp / pu1 / vflexe general-purpose input tin196 gtm input p30.6 o0 general-purpose output tout196 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad4 hwou t ebu address / data bus line ab25 p30.7 i mp / pu1 / vflexe general-purpose input tin197 gtm input p30.7 o0 general-purpose output tout197 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad7 hwou t ebu address / data bus line table 2-43 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-189 v 1.1 2015-05 ac25 p30.8 i mp / pu1 / vflexe general-purpose input tin198 gtm input p30.8 o0 general-purpose output tout198 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad3 hwou t ebu address / data bus line ad25 p30.9 i mp / pu1 / vflexe general-purpose input tin199 gtm input p30.9 o0 general-purpose output tout199 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad0 hwou t ebu address / data bus line ae25 p30.10 i mp / pu1 / vflexe general-purpose input tin200 gtm input p30.10 o0 general-purpose output tout200 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad5 hwou t ebu address / data bus line table 2-43 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-190 v 1.1 2015-05 af25 p30.11 i mp / pu1 / vflexe general-purpose input tin201 gtm input p30.11 o0 general-purpose output tout201 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad10 hwou t ebu address / data bus line ab26 p30.12 i mp / pu1 / vflexe general-purpose input tin202 gtm input p30.12 o0 general-purpose output tout202 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad9 hwou t ebu address / data bus line ac26 p30.13 i mp / pu1 / vflexe general-purpose input tin203 gtm input p30.13 o0 general-purpose output tout203 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad2 hwou t ebu address / data bus line table 2-43 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-191 v 1.1 2015-05 ad26 p30.14 i mp / pu1 / vflexe general-purpose input tin204 gtm input p30.14 o0 general-purpose output tout204 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad1 hwou t ebu address / data bus line ae26 p30.15 i mp / pu1 / vflexe general-purpose input tin205 gtm input p30.15 o0 general-purpose output tout205 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad6 hwou t ebu address / data bus line table 2-44 port 31 functions pin symbol ctrl type function ad18 p31.0 i mp / pu1 / vflexe general-purpose input tin174 gtm input p31.0 o0 general-purpose output tout174 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad30 hwou t ebu address / data bus line table 2-43 port 30 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-192 v 1.1 2015-05 ae18 p31.1 i mp / pu1 / vflexe general-purpose input tin175 gtm input p31.1 o0 general-purpose output tout175 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad29 hwou t ebu address / data bus line af18 p31.2 i mp / pu1 / vflexe general-purpose input tin176 gtm input p31.2 o0 general-purpose output tout176 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad28 hwou t ebu address / data bus line ad19 p31.3 i mp / pu1 / vflexe general-purpose input tin177 gtm input p31.3 o0 general-purpose output tout177 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad26 hwou t ebu address / data bus line table 2-44 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-193 v 1.1 2015-05 ae19 p31.4 i mp / pu1 / vflexe general-purpose input tin178 gtm input p31.4 o0 general-purpose output tout178 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad24 hwou t ebu address / data bus line af19 p31.5 i mp / pu1 / vflexe general-purpose input tin179 gtm input p31.5 o0 general-purpose output tout179 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad23 hwou t ebu address / data bus line ad20 p31.6 i mp / pu1 / vflexe general-purpose input tin180 gtm input p31.6 o0 general-purpose output tout180 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad20 hwou t ebu address / data bus line table 2-44 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-194 v 1.1 2015-05 ae20 p31.7 i mp / pu1 / vflexe general-purpose input tin181 gtm input p31.7 o0 general-purpose output tout181 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad16 hwou t ebu address / data bus line af20 p31.8 i mp / pu1 / vflexe general-purpose input tin182 gtm input p31.8 o0 general-purpose output tout182 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad31 hwou t ebu address / data bus line ad21 p31.9 i mp / pu1 / vflexe general-purpose input tin183 gtm input p31.9 o0 general-purpose output tout183 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad27 hwou t ebu address / data bus line table 2-44 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-195 v 1.1 2015-05 ae21 p31.10 i mp / pu1 / vflexe general-purpose input tin184 gtm input p31.10 o0 general-purpose output tout184 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad21 hwou t ebu address / data bus line af21 p31.11 i mp / pu1 / vflexe general-purpose input tin185 gtm input p31.11 o0 general-purpose output tout185 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad25 hwou t ebu address / data bus line ad22 p31.12 i mp / pu1 / vflexe general-purpose input tin186 gtm input p31.12 o0 general-purpose output tout186 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad19 hwou t ebu address / data bus line table 2-44 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-196 v 1.1 2015-05 ae22 p31.13 i mp / pu1 / vflexe general-purpose input tin187 gtm input p31.13 o0 general-purpose output tout187 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad22 hwou t ebu address / data bus line ad23 p31.14 i mp / pu1 / vflexe general-purpose input tin188 gtm input p31.14 o0 general-purpose output tout188 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad18 hwou t ebu address / data bus line ae23 p31.15 i mp / pu1 / vflexe general-purpose input tin189 gtm input p31.15 o0 general-purpose output tout189 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ad17 hwou t ebu address / data bus line table 2-44 port 31 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-197 v 1.1 2015-05 table 2-45 port 32 functions pin symbol ctrl type function ad17 p32.0 i lp / px/ vext general-purpose input tin36 gtm input fdest pmu input vgate1n smps mode: analog output. external pass device gate control for evr13 p32.0 o0 general-purpose output tout36 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved ae13 p32.2 i lp / pu1 / vext general-purpose input tin38 gtm input arx3d asclin3 input rxdcan3b can node 3 input rxdcanr1d can node 1 input (multicanr+) p32.2 o0 general-purpose output tout38 o1 gtm output atx3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved dcdcsync o6 scu output ? o7 reserved af13 p32.3 i lp / pu1 / vext general-purpose input tin39 gtm input p32.3 o0 general-purpose output tout39 o1 gtm output atx3 o2 asclin3 output ? o3 reserved asclk3 o4 asclin3 output txdcan3 o5 can node 3 output txdcanr1 o6 can node 1 output (multicanr+) ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-198 v 1.1 2015-05 ac14 p32.4 i mp+ / pu1 / vext general-purpose input tin40 gtm input acts1b asclin1 input sdi12 msc1 input p32.4 o0 general-purpose output tout40 o1 gtm output ? o2 reserved end12 o3 msc1 output gtmclk1 o4 gtm output en10 o5 msc1 output extclk1 o6 scu output cout63 o7 ccu60 output ad14 p32.5 i lp / pu1 / vext general-purpose input tin140 gtm input p32.5 o0 general-purpose output tout140 o1 gtm output atx2 o2 asclin2 output ? o3 reserved ? o4 reserved ? o5 reserved txdcan2 o6 can node 2 output ? o7 reserved ae17 p32.6 i lp / pu1 / vext general-purpose input tgi4 ocds input tin141 gtm input rxdcan2c can node 2 input arx2f asclin2 input p32.6 o0 general-purpose output tout141 o1 gtm output ? o2 reserved ? o3 reserved slso212 o4 qspi2 output ? o5 reserved ? o6 reserved ? o7 reserved tgo4 hwou t ocds; enx table 2-45 port 32 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-199 v 1.1 2015-05 af17 p32.7 i lp / pu1 / vext general-purpose input tin142 gtm input tgi5 ocds input p32.7 o0 general-purpose output tout142 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved tgo5 hwou t ocds; enx table 2-46 port 33 functions pin symbol ctrl type function ac11 p33.0 i lp / pu1 / vext general-purpose input tin22 gtm input dsitr0e dsadc channel 0 input e p33.0 o0 general-purpose output tout22 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved vadcg2bfl0 o6 vadc output ? o7 reserved table 2-45 port 32 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-200 v 1.1 2015-05 ad11 p33.1 i lp / pu1 / vext general-purpose input tin23 gtm input psirx0c psi5 input sent9c sent input dscin2b dsadc channel 2 input b dsitr1e dsadc channel 1 input e p33.1 o0 general-purpose output tout23 o1 gtm output aslso3 o2 asclin3 output sclk2 o3 qspi2 output dscout2 o4 dsadc channel 2 output vadcemux02 o5 vadc output vadcg2bfl1 o6 vadc output ? o7 reserved ae11 p33.2 i lp / pu1 / vext general-purpose input tin24 gtm input sent8c sent input dsdin2b dsadc channel 2 input b dsitr2e dsadc channel 2 input e p33.2 o0 general-purpose output tout24 o1 gtm output asclk3 o2 asclin3 output slso210 o3 qspi2 output psitx0 o4 psi5 output vadcemux01 o5 vadc output vadcg2bfl2 o6 vadc output ? o7 reserved table 2-46 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-201 v 1.1 2015-05 af11 p33.3 i lp / pu1 / vext general-purpose input tin25 gtm input psirx1c psi5 input sent7c sent input dscin1b dsadc channel 1 input b p33.3 o0 general-purpose output tout25 o1 gtm output ? o2 reserved ? o3 reserved dscout1 o4 dsadc channel 1 output vadcemux00 o5 vadc output vadcg2bfl3 o6 vadc output ? o7 reserved ac12 p33.4 i lp / pu1 / vext general-purpose input tin26 gtm input sent6c sent input ctrapc ccu61 input dsdin1b dsadc channel 1 input dsitr0f dsadc channel 0 input f p33.4 o0 general-purpose output tout26 o1 gtm output arts2 o2 asclin2 output slso212 o3 qspi2 output psitx1 o4 psi5 output vadcemux12 o5 vadc output vadcg0bfl0 o6 vadc output ? o7 reserved table 2-46 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-202 v 1.1 2015-05 ad12 p33.5 i lp / pu1 / vext general-purpose input tin27 gtm input acts2b asclin2 input psirx2c psi5 input psisrxc psi5-s input sent5c sent input ccpos2c ccu61 input t4eudb gpt120 input dscin0b dsadc channel 0 input b dsitr1f dsadc channel 1 input f p33.5 o0 general-purpose output tout27 o1 gtm output slso07 o2 qspi0 output slso17 o3 qspi1 output dscout0 o4 dsadc channel 0 output vadcemux11 o5 vadc output vadcg0bfl1 o6 vadc output ? o7 reserved ae12 p33.6 i lp / pu1 / vext general-purpose input tin28 gtm input sent4c sent input ccpos1c ccu61 input t2eudb gpt120 input dsdin0b dsadc channel 0 input b dsitr2f dsadc channel 2 input f p33.6 o0 general-purpose output tout28 o1 gtm output aslso2 o2 asclin2 output slso211 o3 qspi2 output psitx2 o4 psi5 output vadcemux10 o5 vadc output vadcg1bfl0 o6 vadc output psistx o7 psi5-s output table 2-46 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-203 v 1.1 2015-05 ac15 p33.7 i lp / pu1 / vext general-purpose input tin29 gtm input rxdcan0e can node 0 input req8 scu input ccpos0c ccu61 input t2inb gpt120 input p33.7 o0 general-purpose output tout29 o1 gtm output asclk2 o2 asclin2 output slso47 o3 qspi4 output ? o4 reserved ? o5 reserved vadcg1bfl1 o6 vadc output ? o7 reserved ad15 p33.8 i mp / highz / vext general-purpose input tin30 gtm input arx2e asclin2 input emgstopa scu input p33.8 o0 general-purpose output tout30 o1 gtm output atx2 o2 asclin2 output slso42 o3 qspi4 output ? o4 reserved txdcan0 o5 can node 0 output ? o6 reserved cout62 o7 ccu61 output smufsp hwou t smu af12 p33.9 i lp / pu1 / vext general-purpose input tin31 gtm input hsic3ina qspi3 input p33.9 o0 general-purpose output tout31 o1 gtm output atx2 o2 asclin2 output slso41 o3 qspi4 output asclk2 o4 asclin2 output ? o5 reserved ? o6 reserved cc62 o7 ccu61 output table 2-46 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-204 v 1.1 2015-05 ae14 p33.10 i mp / pu1 / vext general-purpose input tin32 gtm input slsi4a qspi4 input hsic3inb qspi3 input p33.10 o0 general-purpose output tout32 o1 gtm output slso16 o2 qspi1 output slso40 o3 qspi4 output aslso1 o4 asclin1 output psisclk o5 psi5-s output ? o6 reserved cout61 o7 ccu61 output af14 p33.11 i mp / pu1 / vext general-purpose input tin33 gtm input sclk4a qspi4 input p33.11 o0 general-purpose output tout33 o1 gtm output asclk1 o2 asclin1 output sclk4 o3 qspi4 output ? o4 reserved ? o5 reserved dscgpwmn o6 dsadc channel output cc61 o7 ccu61 output af15 p33.12 i mp / pu1 / vext general-purpose input tin34 gtm input mtsr4a qspi4 input p33.12 o0 general-purpose output tout34 o1 gtm output atx1 o2 asclin1 output mtsr4 o3 qspi4 output asclk1 o4 asclin1 output ? o5 reserved dscgpwmp o6 dsadc output cout60 o7 ccu61 output table 2-46 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-205 v 1.1 2015-05 ae15 p33.13 i mp / pu1 / vext general-purpose input tin35 gtm input arx1f asclin1 input mrst4a qspi4 input dssgnb dsadc channel input b inj11 msc1 input p33.13 o0 general-purpose output tout35 o1 gtm output atx1 o2 asclin1 output mrst4 o3 qspi4 output slso26 o4 qspi2 output ? o5 reserved dcdcsync o6 scu output cc60 o7 ccu61 output ac13 p33.14 i lp / pu1 / vext general-purpose input tin143 gtm input tgi6 ocds input sclk2d qspi2 input p33.14 o0 general-purpose output tout143 o1 gtm output ? o2 reserved sclk2 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cc62 o7 ccu60 output tgo6 hwou t ocds; enx table 2-46 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-206 v 1.1 2015-05 ad13 p33.15 i lp / pu1 / vext general-purpose input tin144 gtm input tgi7 ocds input p33.15 o0 general-purpose output tout144 o1 gtm output ? o2 reserved slso211 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cout62 o7 ccu60 output tgo7 hwou t ocds; enx table 2-47 port 34 functions pin symbol ctrl type function ac9 p34.1 i lp / pu1 / vext general-purpose input tin146 gtm input p34.1 o0 general-purpose output tout146 o1 gtm output atx0 o2 asclin0 output ? o3 reserved txdcan0 o4 can node 0 output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved cout63 o7 ccu60 output ac10 p34.2 i lp / pu1 / vext general-purpose input tin147 gtm input arx0d asclin0 input rxdcan0g can node 0 input rxdcanr0c can node 0 input (multicanr+) p34.2 o0 general-purpose output tout147 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cc60 o7 ccu60 output table 2-46 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-207 v 1.1 2015-05 af10 p34.3 i lp / pu1 / vext general-purpose input tin148 gtm input p34.3 o0 general-purpose output tout148 o1 gtm output ? o2 reserved ? o3 reserved slso210 o4 qspi2 output ? o5 reserved ? o6 reserved cout60 o7 ccu60 output ad10 p34.4 i lp / pu1 / vext general-purpose input tin149 gtm input mrst2d qspi2 input p34.4 o0 general-purpose output tout149 o1 gtm output ? o2 reserved ? o3 reserved mrst2 o4 qspi2 output ? o5 reserved ? o6 reserved cc61 o7 ccu60 output ae10 p34.5 i lp / pu1 / vext general-purpose input tin150 gtm input mtsr2d qspi2 input p34.5 o0 general-purpose output tout150 o1 gtm output ? o2 reserved ? o3 reserved mtsr2 o4 qspi2 output ? o5 reserved ? o6 reserved cout61 o7 ccu60 output table 2-47 port 34 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-208 v 1.1 2015-05 table 2-48 port 40 functions pin symbol ctrl type function ac7 p40.0 i s / highz / vddm general-purpose input vadcg3.0 vadc analog input channel 0 of group 3 ds2pb dsadc: positive analog input of channel 2, pin b ccpos0d ccu60 input sent0a sent input ad7 p40.1 i s / highz / vddm general-purpose inpu.t vadcg3.1 vadc analog input channel 1 of group 3 ds2nb dsadc: negative analog input channel 2, pin b ccpos1b ccu60 input sent1a sent input aa2 p40.2 i s / highz / vddm general-purpose inpu.t vadcg3.2 vadc analog input channel 2 of group 3 (md) ccpos1d ccu60 input sent2a sent input ab2 p40.3 i s / highz / vddm general-purpose input vadcg3.3 vadc analog input channel 3 of group 3 (with pull down diagnostics) ccpos2b ccu60 input sent3a sent input w3 p40.4 i s / highz / vddm general-purpose input vadcg4.0 vadc analog input channel 0 of group 4 ccpos2d ccu60 input sent4a sent input y3 p40.5 i s / highz / vddm general-purpose input vadcg4.1 vadc analog input channel 1 of group 4 (md) ccpos0d ccu61 input sent5a sent input v4 p40.6 i s / highz / vddm general-purpose input vadcg4.4 vadc analog input channel 4 of group 4 ds3pa dsadc: positive analog input of channel 3, pin a ccpos1b ccu61 input sent6a sent input v3 p40.7 i s / highz / vddm general-purpose input vadcg4.5 vadc analog input channel 5 of group 4 ds3na dsadc: negative analog input channel 3, pin a ccpos1d ccu61 input sent7a sent input tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-209 v 1.1 2015-05 v2 p40.11 i s / highz / vddm general-purpose input vadcg10.4 vadc analog input channel 4 of group 10 ds8pa dsadc: positive analog input of channel 8, pin a sent11a sent input w1 p40.12 i s / highz / vddm general-purpose input vadcg10.5 vadc analog input channel 5 of group 10 ds8na dsadc: positive analog input of channel 8, pin a sent12a sent input u2 p40.13 i s / highz / vddm general-purpose input vadcg10.6 vadc analog input channel 6 of group 10 ds9pa dsadc: positive analog input of channel 9, pin a sent13a sent input v1 p40.14 i s / highz / vddm general-purpose input vadcg10.7 vadc analog input channel 7 of group 10 ds9na dsadc: positive analog input of channel 9, pin a sent14a sent input table 2-49 analog inputs pin symbol ctrl type function ac5 an0 i d / highz / vddm analog input 0 vadcg0.0 vadc analog input channel 0 of group 0 ds1pa dsadc: positive analog input of channel 1, pin a ad5 an1 i d / highz / vddm analog input 1 vadcg0.1 vadc analog input channel 1 of group 0 (md) ds1na dsadc: negative analog input channel 1, pin a ae4 an2 i d / highz / vddm analog input 2 vadcg0.2 vadc analog input channel 2 of group 0 (md) ds0pa dsadc: positive analog input of channel 0, pin a af4 an3 i d / highz / vddm analog input 3 vadcg0.3 vadc analog input channel 3 of group 0 ds0na dsadc: negative analog input channel 0, pin a ac2 an4 i d / highz / vddm analog input 4 vadcg0.4 vadc analog input channel 4 of group 0 aa3 an5 i d / highz / vddm analog input 5 vadcg0.5 vadc analog input channel 5 of group 0 ad1 an6 i d / highz / vddm analog input 6 vadcg0.6 vadc analog input channel 6 of group 0 table 2-48 port 40 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-210 v 1.1 2015-05 ab4 an7 i d / highz / vddm analog input 7 vadcg0.7 vadc analog input channel 7 of group 0 (with pull down diagnostics) ac4 an8 i d / highz / vddm analog input 8 vadcg1.0 vadc analog input channel 0 of group 1 ad4 an9 i d / highz / vddm analog input 9 vadcg1.1 vadc analog input channel 1 of group 1 (md) ae3 an10 i d / highz / vddm analog input 10 vadcg1.2 vadc analog input channel 2 of group 1 (md) af3 an11 i d / highz / vddm analog input 11 vadcg1.3 vadc analog input channel 3 of group 1 (with pull down diagnostics) ac3 an16 i d / highz / vddm analog input 16 vadcg2.0 vadc analog input channel 0 of group 2 ad3 an17 i d / highz / vddm analog input 17 vadcg2.1 vadc analog input channel 1 of group 2 (md) ae2 an18 i d / highz / vddm analog input 18 vadcg2.2 vadc analog input channel 2 of group 2 (md) af2 an19 i d / highz / vddm analog input 19 vadcg2.3 vadc analog input channel 3 of group 2 (with pull down diagnostics) ac8 an20 i d / highz / vddm analog input 20 vadcg2.4 vadc analog input channel 4 of group 2 ds2pa dsadc: positive analog input of channel 2, pin a ad8 an21 i d / highz / vddm analog input 21 vadcg2.5 vadc analog input channel 5 of group 2 ds2na dsadc: negative analog input channel 2, pin a ae8 an22 i d / highz / vddm analog input 22 vadcg2.6 vadc analog input channel 6 of group 2 af8 an23 i d / highz / vddm analog input 23 vadcg2.7 vadc analog input channel 7 of group 2 ac7 an24 i s / highz / vddm analog input 24 vadcg3.0 vadc analog input channel 0 of group 3 ds2pb dsadc: positive analog input of channel 2, pin b sent0a sent input channel 0, pin a ad7 an25 i s / highz / vddm analog input 24 vadcg3.1 vadc analog input channel 1 of group 3 (md) ds2nb dsadc: negative analog input channel 2, pin b sent1a sent input channel 1, pin a table 2-49 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-211 v 1.1 2015-05 aa2 an26 i s / highz / vddm analog input 26 vadcg3.2 vadc analog input channel 2 of group 3 (md) sent2a sent input channel 2, pin a ab2 an27 i s / highz / vddm analog input 27 vadcg3.3 vadc analog input channel 3 of group 3 (with pull down diagnostics) sent3a sent input channel 3, pin a ab1 an28 i d / highz / vddm analog input 28 vadcg3.4 vadc analog input channel 4 of group 3 (with pull down diagnostics) ac1 an29 i d / highz / vddm analog input 29 vadcg3.5 vadc analog input channel 5 of group 3 (with pull down diagnostics) w3 an32 i s / highz / vddm analog input 32 vadcg4.0 vadc analog input channel 0 of group 4 sent4a sent input channel 4, pin a y3 an33 i s / highz / vddm analog input 33 vadcg4.1 vadc analog input channel 1 of group 4 (md) sent5a sent input channel 5, pin a v4 an36 i s / highz / vddm analog input 34 vadcg4.4 vadc analog input channel 4 of group 4 ds3pa dsadc: positive analog input of channel 3, pin a sent6a sent input channel 6, pin a v3 an37 i s / highz / vddm analog input 37 vadcg4.5 vadc analog input channel 5 of group 4 ds3na dsadc: negative analog input channel 3, pin a sent7a sent input channel 7, pin a u4 an40 i d / highz / vddm analog input 40 vadcg5.0 vadc analog input channel 0 of group 5 u3 an41 i d / highz / vddm analog input 41 vadcg5.1 vadc analog input channel 1 of group 5 (md) t1 an42 i d / highz / vddm analog input 42 vadcg5.2 vadc analog input channel 2 of group 5 (md) u1 an43 i d / highz / vddm analog input 43 vadcg5.3 vadc analog input channel 3 of group 5 (with pull down diagnostics) ad2 an48 i d / highz / vddm analog input 48 vadcg8.0 vadc analog input channel 0 of group 8 table 2-49 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-212 v 1.1 2015-05 ae1 an49 i d / highz / vddm analog input 49 vadcg8.1 vadc analog input channel 1 of group 8 (md) ae6 an52 i d / highz / vddm analog input 52 vadcg8.4 vadc analog input channel 4 of group 8 ds6pa dsadc: positive analog input of channel 6, pin a af6 an53 i d / highz / vddm analog input 53 vadcg8.5 vadc analog input channel 5 of group 8 ds6na dsadc: negative analog input channel 6, pin a ae7 an54 i d / highz / vddm analog input 5 vadcg8.6 vadc analog input channel 6 of group 8 ds6pb dsadc: positive analog input of channel 6, pin b af7 an55 i d / highz / vddm analog input 50 vadcg8.7 vadc analog input channel 7 of group 8 ds6nb dsadc: negative analog input channel 6, pin b aa4 an56 i d / highz / vddm analog input 56 vadcg9.0 vadc analog input channel 0 of group 9 ab3 an57 i d / highz / vddm analog input 57 vadcg9.1 vadc analog input channel 1 of group 9 (md) y2 an60 i d / highz / vddm analog input 60 vadcg9.4 vadc analog input channel 4 of group 9 ds7pa dsadc: positive analog input of channel 7, pin a aa1 an61 i d / highz / vddm analog input 61 vadcg9.5 vadc analog input channel 5 of group 9 ds7na dsadc: negative analog input channel 7, pin a w2 an64 i d / highz / vddm analog input 64 vadcg10.0 vadc analog input channel 0 of group 10 y1 an65 i d / highz / vddm analog input 65 vadcg10.1 vadc analog input channel 1 of group 10 (md) v2 an68 i s / highz / vddm analog input 68 vadcg10.4 vadc analog input channel 4 of group 10 ds8pa dsadc: positive analog input of channel 8, pin a sent11a sent input channel 11, pin a w1 an69 i s / highz / vddm analog input 69 vadcg10.5 vadc analog input channel 5 of group 10 ds8na dsadc: negative analog input channel 8, pin a sent12a sent input channel 12, pin a table 2-49 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-213 v 1.1 2015-05 u2 an70 i s / highz / vddm analog input 70 vadcg10.6 vadc analog input channel 6 of group 10 ds9pa dsadc: positive analog input of channel 9, pin a sent13a sent input channel 13, pin a v1 an71 i s / highz / vddm analog input 71 vadcg10.7 vadc analog input channel 7 of group 10 ds9na dsadc: negative analog input channel 9, pin a sent14a sent input channel 14, pin a table 2-50 system i/o pin symbol ctrl type function b22 porst i porst / pd / vext power on reset input additional strong pd in case of power fail. a23 esr0 i/o mp / od / vext external system request reset 0 default configuration during and after reset is open- drain driver. the driver drives low during power-on reset. this is valid additi onally after deactivation of porst until the internal reset phase has finished. see also scu chapter for details. default after power-on can be different. see also scu chapter reset cont rol unit and scu_iocr register description. evrwup i evr wakeup pin a22 esr1 i/o mp / pu1 / vext external system request reset 1 default nmi function. see also scu chapter reset control unit and scu_iocr register description. evrwup i evr wakeup pin ac17 vgate1p o vgate1p / - / vext external pass device gate control for evr13 ac21 vgate3p o vgate3p / - / vext external pass device gate control for evr33 f24 tms i a2 / pd / vddp3 jtag module state machine control input dap1 i/o device access port line 1 f23 trst i a2 / pd / vddp3 jtag module reset/enable input table 2-49 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-214 v 1.1 2015-05 e24 tck i a2 / pd / vddp3 jtag module clock input dap0 i device access port line 0 g26 xtal1 i xtal1 / - / vddp3 main oscillator/pll/ clock genera tor input g25 xtal2 o xtal2 / - / vddp3 main oscillator/pll/ clock generator output table 2-51 supply pin symbol ctrl type function ad6 varef1 i vx positive analog reference voltage 1 ac6 vagnd1 i vx negative analog reference voltage 1 w4 varef2 i vx positive analog reference voltage 2 y4 vagnd2 i vx negative analog reference voltage 2 ae9, ae5 vddm i vx adc analog power supply (3.3v / 5v) r1, r4 nc / vddsb i ncvdd sb emulation device: emulation sram standby power supply (1.3v) (emulation device only). production device: not connected. p23, v23, ab23, ac20, b26, c25, d9, d24, e23, h4 vdd i vx digital core power supply (1.3v) f26 vdd i vx digital core power supply (1.3v). the supply pin inturn supplies the main xtal oscillator/pll (1.3v) . a higher decoupling capacitor is therefore recommended to the vss pin for better noise immunity. a25, b24, c23, d14, d22, k4, ac16, ad16, ae16, af16 vext i vx external power supply (5v / 3.3v) h24, h25, h26 vddp3 i vx digital power supply for flash (3.3v). can be also used as external 3.3v power supply for vflex. table 2-50 system i/o (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-215 v 1.1 2015-05 e26 vddp3 i vx digital power supply for oscillator, lvdsh and a2 pads (3.3v). the supply pin inturn supplies the main xtal oscillator/pll (3.3v) . a higher decoupling capacitor is therefore recommended to the vss pin for better noise immunity. a18, b18 vddfl3 i vx flash power supply (3.3v) d7 vflex i vx digital power supply for flex port pads (5v / 3.3v) ac18, ac22 vflexe i vx digital power supply for ebu flex port pads (5v / 3.3v) m23, t23, y23 vebu i vx digital power supply for ebu (3.3v) af5, af9 vssm i vx analog ground for vddm ad9 vevrsb i vx standby power supply (3.3v/5v) for the standby sram (cpu0.dspr). if standby mode is not used: to be handled like vext (3.3v/5v). a26, b25, c24, d8, d15, d23, f25, j4, l23, r23, t4, w23, ac19, ac23 vss i vx digital ground (outer balls) k10, k11, k12, k13, k14, k15, k16, k17, l10, l11, l12, l13, l14, l15, l16, l17 vss i vx digital ground (center balls) m10, m11, m12, m13, m14, m15, m16, m17, n10, n11, n12, n13, n14, n15, n16, n17 vss i vx digital ground (center balls) p11, p12, p13, p14, p15, p16, r11, r12, r13, r14, r15, r16 vss i vx digital ground (center balls) t10, t11, t12, t13, t14, t15, t16, t17, u10, u11, u14, u15, u16, u17 vss i vx digital ground (center balls) u12 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt tx0n table 2-51 supply (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-216 v 1.1 2015-05 legend: column ? ctrl. ?: i = input (for gpio port lines with iocr bit field selection pcx = 0xxx b ) o = output o0 = output with iocr bit field selection pcx = 1x000 b o1 = output with iocr bit field selection pcx = 1x001 b (alt1) o2 = output with iocr bit field selection pcx = 1x010 b (alt2) o3 = output with iocr bit field selection pcx = 1x011 b (alt3) o4 = output with iocr bit field selection pcx = 1x100 b (alt4) o5 = output with iocr bit field selection pcx = 1x101 b (alt5) o6 = output with iocr bit field selection pcx = 1x110 b (alt6) o7 = output with iocr bit field selection pcx = 1x111 b (alt7) column ? type ?: u13 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt tx0p r10 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt clkn p10 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt clkp r17 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt err p17 nc / vddpsb i ncvdd psb emulation device: power supply (3.3v) for dap/jtag pad group. can be connected to vddp or can be left unsupplied (see document aurixed / aurix emulation devi ces specification. production device: this pin is not connected on package level. it can be connected on pcb level to vddp or ground or can be left unsupplied. a1, af1, af26 nc i nc1 not connected. these pins are not connected on package level and will not be used for future extensions. table 2-51 supply (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-217 v 1.1 2015-05 lp = pad class lp (5v/3.3v, class lp parameters for digital input / output and class d parameters for analog input function) mp = pad class mp (5v/3.3v) mp+ = pad class mp+ (5v/3.3v) mpr = pad class mpr (5v/3.3v) a2 = pad class a2 (3.3v) lvdsm = pad class lvdsm (5v/3.3v) lvdsh = pad class lvdsh (3.3v) s = pad class s (class s parameters for digital input and class d parameters for analog input function) d = pad class d (vadc / dsadc) pu = with pull-up device connected during reset (porst = 0) pu1 = with pull-up device connected during reset (porst = 0) 1) 2) 3) pd = with pull-down device connected during reset (porst = 0) pd1 = with pull-down device connected during reset (porst = 0) 1) 2) 3) px = behavior depends on usage: pd in evr13 smps mode and pu1 in gpio mode od = open drain during reset (porst = 0) highz = tri-state during reset (porst = 0) porst = porst input pad xtal1 = xtal1 input pad xtal2 = xtal2 input pad vgate1p = vgate1p vgate3p = vgate3p vx = supply nc = these pins are reserved for future extensions and shall not be connected externally nc1 = these pins are not connecte d on package level and will not be used for future extensions ncvddpsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. ncvddsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. 2.2.2 emergency stop function the emergency stop function can be used to force gpios (g eneral purpose inputs/outputs) via an external input signal (emgstopa or emgstopb) into a defined state: ? input state and ? pu or high-z depending on hwcfg[6] level latched during porst active control of the emergency stop function: ? the emergency stop function can be enabled/disable d in the scu (see chapter ?scu?, ?emergency stop control?) ? the emergency stop input signal, emgstopa (p33.8) / emgsto pb (p21.2) , can selected in the scu (see chapter ?scu?, ?emergency stop control?) 1) the default state of gpios (p x.y) during and after porst active is contro llled via hwcfg[6] (p14.4). hwcfg[6] has a weak internal pull-up active at start-up if the pin is le ft unconnected.see also users manual, ?introduction chapter?, ?general purpose i/o ports and peripheral i/o lines?, figur e: ?default state of port pins during and after reset?. 2) if hwcfg[6] is left unconnected or is externally pulled high, weak internal pull-ups (pu1) / pull-downs (pd1) are active during and after reset. 3) if hwcfg[6] is connected to ground, the pd1 / pu1 pins are predominantly in highz during and after reset. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionstc298x pin definition and functions: data sheet 2-218 v 1.1 2015-05 ? on port level, each gpio can be enabled/disabled fo r the emergency stop function via the px_esr (port x emergency stop) registers in the port control logic (s ee chapter ?general purpose i/o ports and peripheral i/o lines?, ?emergency stop register?). the emergency stop function is available for all gpio ports with th e following exceptions: ? not available for p20.2 (general purpose input/gpi only, overlayed with testmode) ? not available for p40.x (analoge input anx overlayed with gpi) ? not available for p32.0 evr13 smps mode. ? not available for dedicated i/o without general purpose output function (e.g esrx, tms, tck) the emergency stop function can be ov erruled on the following gpio ports: ? p00.x and p02.x: emergency stop can be overruled by the 8-bit standby controller (sbr), if implemented. overruling can be disabled via the control registers p00_scr / p02_scr (see chapter ?general purpose i/o ports and peripheral i/o lines?, p00 / p01) ? p00.x: emergency stop can be overruled by the vadc. overruling can be disabled via the control register p00_scr (see chapter ?general purpose i/ o ports and peripheral i/o lines?, p00) ? p14.0 and p14.1: emergency stop can be overruled in the dxcpl mode (dap over can physical layer mode). no overruling in the dxcm (debug over can message) mode ? p21.6: emergency stop can be overruled in jtag mode if this pin is used as tdi ? p21.7: emergency stop can be overruled in jtag or three pin dap mode ? p20.0: emergency stop can be overruled in jt ag mode if this gpio is used as tdi ? p33.8: emergency stop can be overruled if this pin is used as safety output pin (smufsp) 2.2.3 pull-up/pull-down r eset behavior of the pins in case of leakage test (porst = 0 and testmode = 0), the pull-down of the trst pin is switched off. in case of an user application (testmode = 1), the pull-down of the trst is always switched on. table 2-52 list of pull-up/pull-down reset behavior of the pins pins porst = 0 porst = 1 all gpios pull-up if hwcfg[6] = 1 or high-z if hwcfg[6] = 0 tdi , testmode pull-up porst 1) 1) pull-down with i porst relevant is always activated when a pr imary supply monitor detects a violation. pull-down with i porst relevant pull-down with i pdli relevant trst , tck, tms pull-down esr0 the open-drain driver is used to drive low. 2) 2) valid additionally after deactivation of porst until the internal reset phase has finished. see the scu chapter for details. pull-up 3) 3) see the scu_iocr register description. esr1 pull-up 3) tdo pull-up high-z/pull-up 4) 4) depends on jtag/dap selection with trst . tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-219 v 1.1 2015-05 2.3 TC297x pin definition and functions: bga292 figure 2-3 is showing the TC297x logic symbol for the package variant: bga292. figure 2-3 TC297x logic symbol fo r the package variant bga292. 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 y vss p32.3 p32.2 p32.0 p33.13 p33.11 p33.9 p33.7 p33.5 p33.3 p33.1 an5 an10 vagnd1 varef1 vddm vssm an20 an21 nc y w vext vss p32.4 vgate1 p p33.12 p33.10 p33.8 p33.6 p33.4 p33.2 p33.0 an2 an8 an11 an13 an16 an18 an19 an24 an25 w v p23.0 vext 17 16 15 14 13 12 11 10 9 8 7 6 5 4 an26 an27 v u p23.2 p23.1 u vss p32.7 p32.6 p33.15 p34.5 p34.3 p34.1 an1 an3 an7 an9 an14 an17 nc u an28 an29 u t p23.4 p23.3 t p23.5 vss p32.5 p33.14 p34.4 p34.2 vevrsb an0 an4 an6 an12 an15 an22 an30 t vagnd2 varef2 t r p22.2 p22.3 r p23.6 p23.7 an23 an31 r an35 an33 r p p22.0 p22.1 p p22.5 p22.4 vdd vss vss (agbt tx0p) vss (agbt tx0n) vss vdd an34 an32 p an37 an39 p n vddp3 vdd n p22.7 p22.6 vdd vss vss vss vss vdd an38 an36 n an45 an44 n m xt al 1 xt al 2 m p22.9 p22.8 vss vss vss vss vss vss an40 an41 m an47 an46 m l vss trst l p22.11 p22.10 vss (agbt err) vss vss vss vss vss vss vss (agbt clkn) an42 an43 l p00.12 p00.11 l k p21.4 p21.2 k p21.0 tms nc (vddpsb) vss vss vss vss vss vss vss (agbt clkp) p00.10 p00.8 k p00.9 p00.7 k j p21.5 p21.3 j p21.1 tck vss vss vss vss vss vss p01.7 p00.6 j p00.5 p00.4 j h p20.0 p20.2 h p21.6 p21.7 vdd vss vss vss vss vdd (vddsb) p01.5 p01.6 h p00.3 p00.2 h g p20.3 p20.1 g porst esr1 vdd vss vss vss vss vdd (vddsb) p01.3 p01.4 g p00.1 p00.0 g f p20.8 p20.7 f p20.6 esr0 p02.10 p02.11 f p02.7 p02.8 f e p20.11 p20.10 e p20.9 vss vddfl3 p15.5 p14.2 p12.0 p12.1 p11.0 p11.1 p11.7 p11.8 p11.13 vss p02.9 e p02.5 p02.6 e d p20.13 p20.12 d vss vddfl3 p15.7 p15.8 p14.7 p14.9 p14.10 p11.4 p11.6 p11.5 p11.14 p11.15 vflex vss d p02.3 p02.4 d c p20.14 p15.2 17 16 15 14 13 12 11 10 9 8 7 6 5 4 p02.1 p02.2 c b p15.0 vss vddp3 p15.3 p14.0 p14.4 p14.3 p14.6 p13.0 p13.2 p11.3 p11.10 p11.12 p10.1 p10.4 p10.5 p10.8 vext vss p02.0 b a vss vddp3 p15.1 p15.4 p15.6 p14.1 p14.5 p14.8 p13.1 p13.3 p11.2 p11.9 p11.11 p10.0 p10.3 p10.2 p10.6 p10.7 vext nc a 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 top-view tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-220 v 1.1 2015-05 2.3.1 TC297x bga292 package va riant pin configuration table 2-53 port 00 functions pin symbol ctrl type function g1 p00.0 i mp / pu1 / vext general-purpose input tin9 gtm input ctrapa ccu61 input t12hre ccu60 input inj00 msc0 input cifd9 cif input p00.0 o0 general-purpose output tout9 o1 gtm output asclk3 o2 asclin3 output atx3 o3 asclin3 output ? o4 reserved txdcan1 o5 can node 1 output ? o6 reserved cout63 o7 ccu60 output ethmdioa hwou t eth input/output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-221 v 1.1 2015-05 g2 p00.1 i lp / pu1 / vext general-purpose input tin10 gtm input arx3e asclin3 input rxdcan1d can node 1 input psirx0a psi5 input sent0b sent input cc60inb ccu60 input cc60ina ccu61 input dscin5a dsadc channel 5 input ds5na dsadc positive analog input of channel channel 5, pin a dscin7b dsadc channel 7 input vadcg7.5 vadc analog input channel 5 of group 7 cifd10 cif input p00.1 o0 general-purpose output tout10 o1 gtm output atx3 o2 asclin3 output ? o3 reserved dscout5 o4 dsadc channel 5 output dscout7 o5 dsadc channel 7 output spc0 o6 sent output cc60 o7 ccu61 output h1 p00.2 i lp / pu1 / vext general-purpose input tin11 gtm input sent1b sent input dsdin5a dsadc channel 5 input dsdin7b dsadc channel 7 input ds5pa dsadc negative analog input of channel 5, pin a vadcg7.4 vadc analog input channel 4 of group 7 cifd11 cif input p00.2 o0 general-purpose output tout11 o1 gtm output asclk3 o2 asclin3 output txdcanr1 o3 can node 1 output (multicanr+) psitx0 o4 psi5 output txdcan3 o5 can node 3 output slso34 o6 qspi3 output cout60 o7 ccu61 output table 2-53 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-222 v 1.1 2015-05 h2 p00.3 i lp / pu1 / vext general-purpose input tin12 gtm input rxdcan3a can node 3 input rxdcanr1a can node 1 input (multicanr+) psirx1a psi5 input psisrxa psi5-s input sent2b sent input cc61inb ccu60 input cc61ina ccu61 input dscin3a dsadc channel 3 input vadcg7.3 vadc analog input channel 3 of group 7 dsitr5f dsadc channel 5 input cifd12 cif input p00.3 o0 general-purpose output tout12 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved dscout3 o4 dsadc channel 3 output ? o5 reserved spc2 o6 sent output cc61 o7 ccu61 output j1 p00.4 i lp / pu1 / vext general-purpose input tin13 gtm input req7 scu input sent3b sent input dsdin3a dsadc channel 3 input dssgna dsadc channel input vadcg7.2 vadc analog input channel 2 of group 7 (md) cifd13 cif input p00.4 o0 general-purpose output tout13 o1 gtm output psistx o2 psi5-s output ? o3 reserved psitx1 o4 psi5 output vadcg4bfl0 o5 vadc output spc3 o6 sent output cout61 o7 ccu61 output table 2-53 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-223 v 1.1 2015-05 j2 p00.5 i lp / pu1 / vext general-purpose input tin14 gtm input psirx2a psi5 input sent4b sent input cc62inb ccu60 input cc62ina ccu61 input dscin2a dsadc channel 2 input vadcg7.1 vadc analog input channel 1 of group 7 (md) cifd14 cif input p00.5 o0 general-purpose output tout14 o1 gtm output dscgpwmn o2 dsadc output slso33 o3 qspi3 output dscout2 o4 dsadc channel 2 output vadcg4bfl1 o5 vadc output spc4 o6 sent output cc62 o7 ccu61 output j4 p00.6 i lp / pu1 / vext general-purpose input tin15 gtm input sent5b sent input dsdin2a dsadc channel 2 input a vadcg7.0 vadc analog input channel 0 of group 7 (with pull down diagnostics) dsitr4f dsadc channel 4 input f cifd15 cif input p00.6 o0 general-purpose output tout15 o1 gtm output dscgpwmp o2 dsadc output vadcg4bfl2 o3 vadc output psitx2 o4 psi5 output vadcemux10 o5 vadc output spc5 o6 sent output cout62 o7 ccu61 output table 2-53 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-224 v 1.1 2015-05 k1 p00.7 i lp / pu1 / vext general-purpose input tin16 gtm input sent6b sent input cc60inc ccu61 input ccpos0a ccu61 input t12hrb ccu60 input t2ina gpt120 input dscin4a dsadc channel 4 input a ds4na dsadc negative analog input channel 4, pin a vadcg6.5 vadc analog input channel 5 of group 6 cifclk cif input p00.7 o0 general-purpose output tout16 o1 gtm output ? o2 reserved vadcg4bfl3 o3 vadc output dscout4 o4 dsadc channel 4 output vadcemux11 o5 vadc output spc6 o6 sent output cc60 o7 ccu61 output k4 p00.8 i lp / pu1 / vext general-purpose input tin17 gtm input sent7b sent input cc61inc ccu61 input ccpos1a ccu61 input t13hrb ccu60 input t2euda gpt120 input dsdin4a dsadc channel 4 input a ds4pa dsadc positive analog input of channel 4, pin a vadcg6.4 vadc analog input channel 4 of group 6 cifvsnc cif input p00.8 o0 general-purpose output tout17 o1 gtm output slso36 o2 qspi3 output ? o3 reserved ? o4 reserved vadcemux12 o5 vadc output spc7 o6 sent output cc61 o7 ccu61 output table 2-53 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-225 v 1.1 2015-05 k2 p00.9 i lp / pu1 / vext general-purpose input tin18 gtm input sent8b sent input cc62inc ccu61 input ccpos2a ccu61 input t13hrc ccu60 input t12hrc ccu60 input t4euda gpt120 input dscin1a dsadc channel 1 input a vadcg6.3 vadc analog input channel 3 of group 6 dsitr3f dsadc channel 3 input f cifhsnc cif input p00.9 o0 general-purpose output tout18 o1 gtm output slso37 o2 qspi3 output arts3 o3 asclin3 output dscout1 o4 dsadc channel 1 output ? o5 reserved spc8 o6 sent output cc62 o7 ccu61 output k5 p00.10 i lp / pu1 / vext general-purpose input tin19 gtm input sent9b sent input dsdin1a dsadc channel 1 input a vadcg6.2 vadc analog input channel 2 of group 6 (md) p00.10 o0 general-purpose output tout19 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved spc9 o6 sent output cout63 o7 ccu61 output table 2-53 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-226 v 1.1 2015-05 l1 p00.11 i lp / pu1 / vext general-purpose input tin20 gtm input ctrapa ccu60 input t12hre ccu61 input dscin0a dsadc channel 0 input a vadcg6.1 vadc analog input channel 1 of group 6 (md) p00.11 o0 general-purpose output tout20 o1 gtm output ? o2 reserved ? o3 reserved dscout0 o4 dsadc channel 0 output ? o5 reserved ? o6 reserved ? o7 reserved l2 p00.12 i lp / pu1 / vext general-purpose input tin21 gtm input acts3a asclin3 input dsdin0a dsadc channel 0 input a vadcg6.0 vadc analog input channel 0 of group 6 p00.12 o0 general-purpose output tout21 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cout63 o7 ccu61 output table 2-53 port 00 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-227 v 1.1 2015-05 table 2-54 port 01 functions pin symbol ctrl type function g5 p01.3 i lp / pu1 / vext general-purpose input tin111 gtm input slsi3b qspi3 input dsitr7f dsadc channel 7 input f p01.3 o0 general-purpose output tout111 o1 gtm output ? o2 reserved ? o3 reserved slso39 o4 qspi3 output txdcan1 o5 can node 1 output ? o6 reserved ? o7 reserved g4 p01.4 i lp / pu1 / vext general-purpose input tin112 gtm input rxdcan1c can node 1 input dsitr7e dsadc channel 7 input e p01.4 o0 general-purpose output tout112 o1 gtm output ? o2 reserved ? o3 reserved slso310 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved h5 p01.5 i lp / pu1 / vext general-purpose input tin113 gtm input mrst3c qspi3 input dscin8a dsadc channel 8 input a p01.5 o0 general-purpose output tout113 o1 gtm output ? o2 reserved ? o3 reserved mrst3 o4 qspi3 output ? o5 reserved dscout8 o6 dsadc channel 8 output ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-228 v 1.1 2015-05 h4 p01.6 i mp / pu1 / vext general-purpose input tin114 gtm input mtsr3c qspi3 input dsdin8a dsadc channel 8 input a p01.6 o0 general-purpose output tout114 o1 gtm output ? o2 reserved ? o3 reserved mtsr3 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved j5 p01.7 i mp / pu1 / vext general-purpose input tin115 gtm input sclk3c qspi3 input dsitr8f dsadc channel 8 input f p01.7 o0 general-purpose output tout115 o1 gtm output ? o2 reserved ? o3 reserved sclk3 o4 qspi3 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-54 port 01 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-229 v 1.1 2015-05 table 2-55 port 02 functions pin symbol ctrl type function b1 p02.0 i mp+ / pu1 / vext general-purpose input tin0 gtm input req6 scu input arx2g asclin2 input cc60ina ccu60 input cc60inb ccu61 input cifd0 cif input p02.0 o0 general-purpose output tout0 o1 gtm output atx2 o2 asclin2 output slso31 o3 qspi3 output dscgpwmn o4 dsadc output txdcan0 o5 can node 0 output txd0a o6 eray0 output cc60 o7 ccu60 output c2 p02.1 i lp / pu1 / vext general-purpose input tin1 gtm input req14 scu input arx2b asclin2 input rxdcan0a can node 0 input rxd0a2 eray0 input cifd1 cif input p02.1 o0 general-purpose output tout1 o1 gtm output slso47 o2 qspi4 output slso32 o3 qspi3 output dscgpwmp o4 dsadc output ? o5 reserved ? o6 reserved cout60 o7 ccu60 output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-230 v 1.1 2015-05 c1 p02.2 i mp+ / pu1 / vext general-purpose input tin2 gtm input cc61ina ccu60 input cc61inb ccu61 input cifd2 cif input p02.2 o0 general-purpose output tout2 o1 gtm output atx1 o2 asclin1 output slso33 o3 qspi3 output psitx0 o4 psi5 output txdcan2 o5 can node 2 output txd0b o6 eray0 output cc61 o7 ccu60 output d2 p02.3 i lp / pu1 / vext general-purpose input tin3 gtm input arx1g asclin1 input rxdcan2b can node 2 input rxd0b2 eray0 input psirx0b psi5 input dscin5b dsadc channel 5 input b sdi11 msc1 input cifd3 cif input p02.3 o0 general-purpose output tout3 o1 gtm output aslso2 o2 asclin2 output slso34 o3 qspi3 output dscout5 o4 dsadc channel 5 output ? o5 reserved ? o6 reserved cout61 o7 ccu60 output table 2-55 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-231 v 1.1 2015-05 d1 p02.4 i mp+ / pu1 / vext general-purpose input tin4 gtm input slsi3a qspi3 input ectt1 ttcan input rxdcan0d can node 0 input cc62ina ccu60 input cc62inb ccu61 input dsdin5b dsadc channel 5 input b sda0a i2c0 input cifd4 cif input p02.4 o0 general-purpose output tout4 o1 gtm output asclk2 o2 asclin2 output slso30 o3 qspi3 output psisclk o4 psi5-s output sda0 o5 i2c0 output txen0a o6 eray0 output cc62 o7 ccu60 output e2 p02.5 i mp+ / pu1 / vext general-purpose input tin5 gtm input mrst3a qspi3 input ectt2 ttcan input psirx1b psi5 input psisrxb psi5-s input sent3c sent input dscin4b dsadc channel 4 input b scl0a i2c0 input cifd5 cif input p02.5 o0 general-purpose output tout5 o1 gtm output txdcan0 o2 can node 0 output mrst3 o3 qspi3 output dscout4 o4 dsadc channel 4 output scl0 o5 i2c0 output txen0b o6 eray0 output cout62 o7 ccu60 output table 2-55 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-232 v 1.1 2015-05 e1 p02.6 i mp / pu1 / vext general-purpose input tin6 gtm input mtsr3a qspi3 input sent2c sent input cc60inc ccu60 input ccpos0a ccu60 input t12hrb ccu61 input t3ina gpt120 input cifd6 cif input dsdin4b dsadc channel 4 input b dsitr5e dsadc channel 5 input e p02.6 o0 general-purpose output tout6 o1 gtm output psistx o2 psi5-s output mtsr3 o3 qspi3 output psitx1 o4 psi5 output vadcemux00 o5 vadc output ? o6 reserved cc60 o7 ccu60 output table 2-55 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-233 v 1.1 2015-05 f2 p02.7 i mp / pu1 / vext general-purpose input tin7 gtm input sclk3a qspi3 input psirx2b psi5 input sent1c sent input cc61inc ccu60 input ccpos1a ccu60 input t13hrb ccu61 input t3euda gpt120 input cifd7 cif input dscin3b dsadc channel 3 input b dsitr4e dsadc channel 4 input e p02.7 o0 general-purpose output tout7 o1 gtm output ? o2 reserved sclk3 o3 qspi3 output dscout3 o4 dsadc channel 3 output vadcemux01 o5 vadc output spc1 o6 sent output cc61 o7 ccu60 output table 2-55 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-234 v 1.1 2015-05 f1 p02.8 i lp / pu1 / vext general-purpose input tin8 gtm input sent0c sent input cc62inc ccu60 input ccpos2a ccu60 input t12hrc ccu61 input t13hrc ccu61 input t4ina gpt120 input cifd8 cif input dsdin3b dsadc channel 3 input b dsitr3e dsadc channel 3 input e p02.8 o0 general-purpose output tout8 o1 gtm output slso35 o2 qspi3 output ? o3 reserved psitx2 o4 psi5 output vadcemux02 o5 vadc output ethmdc o6 eth output cc62 o7 ccu60 output e4 p02.9 i lp / pu1 / vext general-purpose input tin116 gtm input p02.9 o0 general-purpose output tout116 o1 gtm output atx2 o2 asclin2 output ? o3 reserved ? o4 reserved txdcan1 o5 can node 1 output ? o6 reserved ? o7 reserved table 2-55 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-235 v 1.1 2015-05 f5 p02.10 i lp / pu1 / vext general-purpose input tin117 gtm input arx2c asclin2 input rxdcan1e can node 1 input p02.10 o0 general-purpose output tout117 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved f4 p02.11 i lp / pu1 / vext general-purpose input tin118 gtm input p02.11 o0 general-purpose output tout118 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-56 port 10 functions pin symbol ctrl type function a7 p10.0 i lp / pu1 / vext general-purpose input tin102 gtm input t6eudb gpt120 input p10.0 o0 general-purpose output tout102 o1 gtm output ? o2 reserved slso110 o3 qspi1 output ? o4 reserved vadcg6bfl0 o5 vadc output ? o6 reserved ? o7 reserved table 2-55 port 02 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-236 v 1.1 2015-05 b7 p10.1 i mp+ / pu1 / vext general-purpose input tin103 gtm input mrst1a qspi1 input t5eudb gpt120 input p10.1 o0 general-purpose output tout103 o1 gtm output mtsr1 o2 qspi1 output mrst1 o3 qspi1 output en01 o4 msc0 output vadcg6bfl1 o5 vadc output end03 o6 msc0 output ? o7 reserved a5 p10.2 i mp / pu1 / vext general-purpose input tin104 gtm input sclk1a qspi1 input t6inb gpt120 input req2 scu input rxdcan2e can node 2 input sdi01 msc0 input p10.2 o0 general-purpose output tout104 o1 gtm output ? o2 reserved sclk1 o3 qspi1 output en00 o4 msc0 output vadcg6bfl2 o5 vadc output end02 o6 msc0 output ? o7 reserved table 2-56 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-237 v 1.1 2015-05 a6 p10.3 i mp / pu1 / vext general-purpose input tin105 gtm input mtsr1a qspi1 input req3 scu input t5inb gpt120 input p10.3 o0 general-purpose output tout105 o1 gtm output vadcg6bfl3 o2 vadc output mtsr1 o3 qspi1 output en00 o4 msc0 output end02 o5 msc0 output txdcan2 o6 can node 2 output ? o7 reserved b6 p10.4 i mp+ / pu1 / vext general-purpose input tin106 gtm input mtsr1c qspi1 input ccpos0c ccu60 input t3inb gpt120 input p10.4 o0 general-purpose output tout106 o1 gtm output ? o2 reserved slso18 o3 qspi1 output mtsr1 o4 qspi1 output en00 o5 msc0 output end02 o6 msc0 output ? o7 reserved table 2-56 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-238 v 1.1 2015-05 b5 p10.5 i lp / pu1 / vext general-purpose input tin107 gtm input hwcfg4 scu input rxdcanr0a can node 0 input (multicanr+) inj01 msc0 input p10.5 o0 general-purpose output tout107 o1 gtm output atx2 o2 asclin2 output slso38 o3 qspi3 output slso19 o4 qspi1 output t6out o5 gpt120 output aslso2 o6 asclin2 output psitx3 o7 psi5 output a4 p10.6 i lp / pu1 / vext general-purpose input tin108 gtm input arx2d asclin2 input mtsr3b qspi3 input psirx3c psi5 input hwcfg5 scu input p10.6 o0 general-purpose output tout108 o1 gtm output asclk2 o2 asclin2 output mtsr3 o3 qspi3 output t3out o4 gpt120 output txdcanr0 o5 can node 0 output (multicanr+) mrst1 o6 qspi1 output vadcg7bfl0 o7 vadc output table 2-56 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-239 v 1.1 2015-05 a3 p10.7 i lp / pu1 / vext general-purpose input tin109 gtm input acts2a asclin2 input mrst3b qspi3 input req4 scu input ccpos1c ccu60 input t3eudb gpt120 input p10.7 o0 general-purpose output tout109 o1 gtm output ? o2 reserved mrst3 o3 qspi3 output vadcg7bfl1 o4 vadc output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved ? o7 reserved b4 p10.8 i lp / pu1 / vext general-purpose input tin110 gtm input sclk3b qspi3 input req5 scu input ccpos2c ccu60 input t4inb gpt120 input rxdcanr0b can node 0 input (multicanr+) p10.8 o0 general-purpose output tout110 o1 gtm output arts2 o2 asclin2 output sclk3 o3 qspi3 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-56 port 10 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-240 v 1.1 2015-05 table 2-57 port 11 functions pin symbol ctrl type function e10 p11.0 i mp+ / pu1 / vflex general-purpose input tin119 gtm input arx3b asclin3 input p11.0 o0 general-purpose output tout119 o1 gtm output atx3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved ethtxd3 o6 eth output ? o7 reserved e9 p11.1 i mp+ / pu1 / vflex general-purpose input tin120 gtm input p11.1 o0 general-purpose output tout120 o1 gtm output asclk3 o2 asclin3 output atx3 o3 asclin3 output ? o4 reserved ? o5 reserved ethtxd2 o6 eth output ? o7 reserved a10 p11.2 i mpr/ pu1 / vflex general-purpose input tin95 gtm input p11.2 o0 general-purpose output tout95 o1 gtm output end03 o2 msc0 output slso05 o3 qspi0 output slso15 o4 qspi1 output en01 o5 msc0 output ethtxd1 o6 eth output cout63 o7 ccu60 output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-241 v 1.1 2015-05 b10 p11.3 i mpr / pu1 / vflex general-purpose input tin96 gtm input mrst1b qspi1 input sdi03 msc0 input p11.3 o0 general-purpose output tout96 o1 gtm output ? o2 reserved mrst1 o3 qspi1 output txd0a o4 eray0 output ? o5 reserved ethtxd0 o6 eth output cout62 o7 ccu60 output d10 p11.4 i mp+ / pu1 / vflex general-purpose input tin121 gtm input ethrxclkb eth input p11.4 o0 general-purpose output tout121 o1 gtm output asclk3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved ethtxer o6 eth output ? o7 reserved d8 p11.5 i lp / pu1 / vflex general-purpose input tin122 gtm input ethtxclka eth input p11.5 o0 general-purpose output tout122 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-57 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-242 v 1.1 2015-05 d9 p11.6 i mpr / pu1 / vflex general-purpose input tin97 gtm input sclk1b qspi1 input p11.6 o0 general-purpose output tout97 o1 gtm output txen0b o2 eray0 output sclk1 o3 qspi1 output txen0a o4 eray0 output fclp0 o5 msc0 output ethtxen o6 eth output cout61 o7 ccu60 output e8 p11.7 i lp / pu1 / vflex general-purpose input tin123 gtm input ethrxd3 eth input p11.7 o0 general-purpose output tout123 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved e7 p11.8 i lp / pu1 / vflex general-purpose input tin124 gtm input ethrxd2 eth input p11.8 o0 general-purpose output tout124 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-57 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-243 v 1.1 2015-05 a9 p11.9 i mp+ / pu1 / vflex general-purpose input tin98 gtm input mtsr1b qspi1 input rxd0a1 eray0 input ethrxd1 eth input p11.9 o0 general-purpose output tout98 o1 gtm output ? o2 reserved mtsr1 o3 qspi1 output ? o4 reserved sop0 o5 msc0 output ? o6 reserved cout60 o7 ccu60 output b9 p11.10 i lp / pu1 / vflex general-purpose input tin99 gtm input req12 scu input arx1e asclin1 input slsi1a qspi1 input rxdcan3d can node 3 input rxd0b1 eray0 input ethrxd0 eth input sdi00 msc0 input p11.10 o0 general-purpose output tout99 o1 gtm output ? o2 reserved slso03 o3 qspi0 output slso13 o4 qspi1 output ? o5 reserved ? o6 reserved cc62 o7 ccu60 output table 2-57 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-244 v 1.1 2015-05 a8 p11.11 i mp+ / pu1 / vflex general-purpose input tin100 gtm input ethcrsdva eth input ethrxdva eth input ethcrsb eth input p11.11 o0 general-purpose output tout100 o1 gtm output end02 o2 msc0 output slso04 o3 qspi0 output slso14 o4 qspi1 output en00 o5 msc0 output txen0b o6 eray0 output cc61 o7 ccu60 output b8 p11.12 i mpr / pu1 / vflex general-purpose input tin101 gtm input ethrefclk eth input ethtxclkb eth input (not for productive purposes) ethrxclka eth input (not for productive purposes) p11.12 o0 general-purpose output tout101 o1 gtm output atx1 o2 asclin1 output gtmclk2 o3 gtm output txd0b o4 eray0 output txdcan3 o5 can node 3 output extclk1 o6 scu output cc60 o7 ccu60 output table 2-57 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-245 v 1.1 2015-05 e6 p11.13 i lp / pu1 / vflex general-purpose input tin125 gtm input ethrxera eth input sda1a i2c1 input p11.13 o0 general-purpose output tout125 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sda1 o6 i2c1 output ? o7 reserved d7 p11.14 i lp / pu1 / vflex general-purpose input tin126 gtm input ethcrsdvb eth input ethrxdvb eth input ethcrsa eth input scl1a i2c1 input p11.14 o0 general-purpose output tout126 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved scl1 o6 i2c1 output ? o7 reserved d6 p11.15 i lp / pu1 / vflex general-purpose input tin127 gtm input ethcol eth input p11.15 o0 general-purpose output tout127 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-57 port 11 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-246 v 1.1 2015-05 table 2-58 port 12 functions pin symbol ctrl type function e12 p12.0 i lp / pu1 / vflex general-purpose input tin128 gtm input ethrxclkc eth input rxdcan0c can node 0 input p12.0 o0 general-purpose output tout128 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdc o6 eth output ? o7 reserved e11 p12.1 i lp / pu1 / vflex general-purpose input tin129 gtm input p12.1 o0 general-purpose output tout129 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved txdcan0 o5 can node 0 output ? o6 reserved ? o7 reserved ethmdioc hwou t eth input/output table 2-59 port 13 functions pin symbol ctrl type function b12 p13.0 i lvdsm_n / pu1 / vext general-purpose input tin91 gtm input p13.0 o0 general-purpose output tout91 o1 gtm output end03 o2 msc0 output sclk2n o3 qspi2 output (lvds) en01 o4 msc0 output fcln0 o5 msc0 output (lvds) fclnd0 o6 msc0 output (lvds) ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-247 v 1.1 2015-05 a12 p13.1 i lvdsm_p / pu1 / vext general-purpose input tin92 gtm input scl0b i2c0 input p13.1 o0 general-purpose output tout92 o1 gtm output ? o2 reserved sclk2p o3 qspi2 output (lvds) ? o4 reserved fclp0 o5 msc0 output (lvds) scl0 o6 i2c0 output ? o7 reserved b11 p13.2 i lvdsm_n / pu1 / vext general-purpose input tin93 gtm input capina gpt120 input sda0b i2c0 input p13.2 o0 general-purpose output tout93 o1 gtm output ? o2 reserved mtsr2n o3 qspi2 output (lvds) fclp0 o4 msc0 output son0 o5 msc0 output (lvds) sda0 o6 i2c0 output sond0 o7 msc0 output (lvds) a11 p13.3 i lvdsm_p / pu1 / vext general-purpose input tin94 gtm input p13.3 o0 general-purpose output tout94 o1 gtm output ? o2 reserved mtsr2p o3 qspi2 output (lvds) ? o4 reserved sop0 o5 msc0 output (lvds) ? o6 reserved ? o7 reserved table 2-59 port 13 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-248 v 1.1 2015-05 table 2-60 port 14 functions pin symbol ctrl type function b16 p14.0 i mp+ / pu1 / vext general-purpose input tin80 gtm input sent12d sent input p14.0 o0 general-purpose output tout80 o1 gtm output atx0 o2 asclin0 output recommended as boot loader pin txd0a o3 eray0 output txd0b o4 eray0 output txdcan1 o5 can node 1 output used for single pin dap (spd) function asclk0 o6 asclin0 output cout62 o7 ccu60 output a15 p14.1 i mp / pu1 / vext general-purpose input tin81 gtm input req15 scu input sent13d sent input arx0a asclin0 input recommended as boot loader pin rxdcan1b can node 1 input used for single pin dap (spd) function rxd0a3 eray0 input rxd0b3 eray0 input evrwupa scu input p14.1 o0 general-purpose output tout81 o1 gtm output atx0 o2 asclin0 output recommended as boot loader pin. ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cout63 o7 ccu60 output tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-249 v 1.1 2015-05 e13 p14.2 i lp / pu1 / vext general-purpose input tin82 gtm input hwcfg2 evr13 scu input latched at cold power on reset to decide evr13 activation. p14.2 o0 general-purpose output tout82 o1 gtm output atx2 o2 asclin2 output slso21 o3 qspi2 output ? o4 reserved ? o5 reserved asclk2 o6 asclin2 output ? o7 reserved b14 p14.3 i lp / pu1 / vext general-purpose input tin83 gtm input arx2a asclin2 input req10 scu input hwcfg3_bmi scu input sdi02 msc0 input p14.3 o0 general-purpose output tout83 o1 gtm output atx2 o2 asclin2 output slso23 o3 qspi2 output aslso1 o4 asclin1 output aslso3 o5 asclin3 output ? o6 reserved ? o7 reserved table 2-60 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-250 v 1.1 2015-05 b15 p14.4 i lp / pu1 / vext general-purpose input tin84 gtm input hwcfg6 scu input latched at cold power on reset to decide default pad reset state (pu or highz). p14.4 o0 general-purpose output tout84 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a14 p14.5 i mp+ / pu1 / vext general-purpose input tin85 gtm input hwcfg1 evr33 scu input latched at cold power on reset to decide evr33 activation. p14.5 o0 general-purpose output tout85 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved txd0b o6 eray0 output txd1b o7 eray1 output b13 p14.6 i mp+ / pu1 / vext general-purpose input tin86 gtm input hwcfg0 dcldo scu input if evr13 active, latched at cold power on reset to decide between ldo and smps mode. p14.6 o0 general-purpose output tout86 o1 gtm output ? o2 reserved slso22 o3 qspi2 output ? o4 reserved ? o5 reserved txen0b o6 eray0 output txen1b o7 eray1 output table 2-60 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-251 v 1.1 2015-05 d13 p14.7 i lp / pu1 / vext general-purpose input tin87 gtm input rxd0b0 eray0 input rxd1b0 eray1 input p14.7 o0 general-purpose output tout87 o1 gtm output arts0 o2 asclin0 output slso24 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved a13 p14.8 i lp / pu1 / vext general-purpose input tin88 gtm input arx1d asclin1 input rxdcan2d can node 2 input rxd0a0 eray0 input rxd1a0 eray1 input p14.8 o0 general-purpose output tout88 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved d12 p14.9 i mp+ / pu1 / vext general-purpose input tin89 gtm input acts0a asclin0 input p14.9 o0 general-purpose output tout89 o1 gtm output end03 o2 msc0 output en01 o3 msc0 output ? o4 reserved txen0b o5 eray0 output txen0a o6 eray0 output txen1a o7 eray1 output table 2-60 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-252 v 1.1 2015-05 d11 p14.10 i mp+ / pu1 / vext general-purpose input tin90 gtm input p14.10 o0 general-purpose output tout90 o1 gtm output end02 o2 msc0 output en00 o3 msc0 output atx1 o4 asclin1 output txdcan2 o5 can node 2 output txd0a o6 eray0 output txd1a o7 eray1 output table 2-61 port 15 functions pin symbol ctrl type function b20 p15.0 i lp / pu1 / vext general-purpose input tin71 gtm input p15.0 o0 general-purpose output tout71 o1 gtm output atx1 o2 asclin1 output slso013 o3 qspi0 output ? o4 reserved txdcan2 o5 can node 2 output asclk1 o6 asclin1 output ? o7 reserved a18 p15.1 i lp / pu1 / vext general-purpose input tin72 gtm input req16 scu input arx1a asclin1 input rxdcan2a can node 2 input slsi2b qspi2 input evrwupb scu input p15.1 o0 general-purpose output tout72 o1 gtm output atx1 o2 asclin1 output slso25 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-60 port 14 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-253 v 1.1 2015-05 c19 p15.2 i mp / pu1 / vext general-purpose input tin73 gtm input slsi2a qspi2 input mrst2e qspi2 input sent10d sent input hsic2ina qspi2 input p15.2 o0 general-purpose output tout73 o1 gtm output atx0 o2 asclin0 output slso20 o3 qspi2 output ? o4 reserved txdcan1 o5 can node 1 output asclk0 o6 asclin0 output ? o7 reserved b17 p15.3 i mp / pu1 / vext general-purpose input tin74 gtm input arx0b asclin0 input sclk2a qspi2 input rxdcan1a can node 1 input hsic2inb qspi2 input p15.3 o0 general-purpose output tout74 o1 gtm output atx0 o2 asclin0 output sclk2 o3 qspi2 output end03 o4 msc0 output en01 o5 msc0 output ? o6 reserved ? o7 reserved table 2-61 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-254 v 1.1 2015-05 a17 p15.4 i mp / pu1 / vext general-purpose input tin75 gtm input mrst2a qspi2 input req0 scu input scl0c i2c0 input sent11d sent input p15.4 o0 general-purpose output tout75 o1 gtm output atx1 o2 asclin1 output mrst2 o3 qspi2 output ? o4 reserved ? o5 reserved scl0 o6 i2c0 output cc62 o7 ccu60 output e14 p15.5 i mp / pu1 / vext general-purpose input tin76 gtm input arx1b asclin1 input mtsr2a qspi2 input req13 scu input sda0c i2c0 input p15.5 o0 general-purpose output tout76 o1 gtm output atx1 o2 asclin1 output mtsr2 o3 qspi2 output end02 o4 msc0 output en00 o5 msc0 output sda0 o6 i2c0 output cc61 o7 ccu60 output table 2-61 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-255 v 1.1 2015-05 a16 p15.6 i mp / pu1 / vext general-purpose input tin77 gtm input mtsr2b qspi2 input p15.6 o0 general-purpose output tout77 o1 gtm output atx3 o2 asclin3 output mtsr2 o3 qspi2 output slso53 o4 qspi5 output sclk2 o5 qspi2 output asclk3 o6 asclin3 output cc60 o7 ccu60 output d15 p15.7 i mp / pu1 / vext general-purpose input tin78 gtm input arx3a asclin3 input mrst2b qspi2 input p15.7 o0 general-purpose output tout78 o1 gtm output atx3 o2 asclin3 output mrst2 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cout60 o7 ccu60 output d14 p15.8 i mp / pu1 / vext general-purpose input tin79 gtm input sclk2b qspi2 input req1 scu input p15.8 o0 general-purpose output tout79 o1 gtm output ? o2 reserved sclk2 o3 qspi2 output ? o4 reserved ? o5 reserved asclk3 o6 asclin3 output cout61 o7 ccu60 output table 2-61 port 15 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-256 v 1.1 2015-05 table 2-62 port 20 functions pin symbol ctrl type function h20 p20.0 i mp / pu1 / vext general-purpose input tin59 gtm input rxdcan3c can node 3 input rxdcanr1c can node 1 input (multicanr+) t6euda gpt120 input req9 scu input sysclk hsct input tgi0 ocds input p20.0 o0 general-purpose output tout59 o1 gtm output atx3 o2 asclin3 output asclk3 o3 asclin3 output ? o4 reserved sysclk o5 hsct output ? o6 reserved ? o7 reserved tgo0 hwou t ocds; enx g19 p20.1 i lp / pu1 / vext general-purpose input tin60 gtm input tgi1 ocds input p20.1 o0 general-purpose output tout60 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved tgo1 hwou t ocds; enx tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-257 v 1.1 2015-05 h19 p20.2 i lp / pu / vext general-purpose input this pin is latched at power on reset release to enter test mode. testmode ocds input p20.2 o0 output function not available ? o1 output function not available ? o2 output function not available ? o3 output function not available ? o4 output function not available ? o5 output function not available ? o6 output function not available ? o7 output function not available g20 p20.3 i lp / pu1 / vext general-purpose input tin61 gtm input t6ina gpt120 input arx3c asclin3 input p20.3 o0 general-purpose output tout61 o1 gtm output atx3 o2 asclin3 output slso09 o3 qspi0 output slso29 o4 qspi2 output txdcan3 o5 can node 3 output txdcanr1 o6 can node 1 output (multicanr+) ? o7 reserved f17 p20.6 i lp / pu1 / vext general-purpose input tin62 gtm input p20.6 o0 general-purpose output tout62 o1 gtm output arts1 o2 asclin1 output slso08 o3 qspi0 output slso28 o4 qspi2 output ? o5 reserved wdt2lck o6 scu output ? o7 reserved table 2-62 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-258 v 1.1 2015-05 f19 p20.7 i lp / pu1 / vext general-purpose input tin63 gtm input acts1a asclin1 input rxdcan0b can node 0 input p20.7 o0 general-purpose output tout63 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved wdt1lck o6 scu output cout63 o7 ccu61 output f20 p20.8 i mp / pu1 / vext general-purpose input tin64 gtm input p20.8 o0 general-purpose output tout64 o1 gtm output aslso1 o2 asclin1 output slso00 o3 qspi0 output slso10 o4 qspi1 output txdcan0 o5 can node 0 output wdt0lck o6 scu output cc60 o7 ccu61 output e17 p20.9 i lp / pu1 / vext general-purpose input tin65 gtm input arx1c asclin1 input rxdcan3e can node 3 input req11 scu input slsi0b qspi0 input p20.9 o0 general-purpose output tout65 o1 gtm output ? o2 reserved slso01 o3 qspi0 output slso11 o4 qspi1 output ? o5 reserved wdtslck o6 scu output cc61 o7 ccu61 output table 2-62 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-259 v 1.1 2015-05 e19 p20.10 i mp / pu1 / vext general-purpose input tin66 gtm input p20.10 o0 general-purpose output tout66 o1 gtm output atx1 o2 asclin1 output slso06 o3 qspi0 output slso27 o4 qspi2 output txdcan3 o5 can node 3 output asclk1 o6 asclin1 output cc62 o7 ccu61 output e20 p20.11 i mp / pu1 / vext general-purpose input tin67 gtm input sclk0a qspi0 input p20.11 o0 general-purpose output tout67 o1 gtm output ? o2 reserved sclk0 o3 qspi0 output ? o4 reserved ? o5 reserved ? o6 reserved cout60 o7 ccu61 output d19 p20.12 i mp / pu1 / vext general-purpose input tin68 gtm input mrst0a qspi0 input p20.12 o0 general-purpose output tout68 o1 gtm output ? o2 reserved mrst0 o3 qspi0 output mtsr0 o4 qspi0 output ? o5 reserved ? o6 reserved cout61 o7 ccu61 output table 2-62 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-260 v 1.1 2015-05 d20 p20.13 i mp / pu1 / vext general-purpose input tin69 gtm input slsi0a qspi0 input p20.13 o0 general-purpose output tout69 o1 gtm output ? o2 reserved slso02 o3 qspi0 output slso12 o4 qspi1 output sclk0 o5 qspi0 output ? o6 reserved cout62 o7 ccu61 output c20 p20.14 i mp / pu1 / vext general-purpose input tin70 gtm input mtsr0a qspi0 input p20.14 o0 general-purpose output tout70 o1 gtm output ? o2 reserved mtsr0 o3 qspi0 output ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-63 port 21 functions pin symbol ctrl type function k17 p21.0 i lvdsh_n/ pu1 / vddp3 general-purpose input tin51 gtm input mrst4dn qspi4 input (lvds) hold ebu input p21.0 o0 general-purpose output tout51 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdc o6 eth output baaba0 o7 ebu output (combined for baa and ba0) hsm1 o hsm output table 2-62 port 20 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-261 v 1.1 2015-05 j17 p21.1 i lvdsh_p/ pu1 / vddp3 general-purpose input tin52 gtm input ethmdiob eth input (not for production purposes) mrst4dp qspi4 input (lvds) wait ebu input p21.1 o0 general-purpose output tout52 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ethmdio o6 eth output (not for production purposes) breqba1 o7 ebu output (combined for breq and ba1) hsm2 o hsm output k19 p21.2 i lvdsh_n/ pu1 / vddp3 general-purpose input tin53 gtm input mrst2cn qspi2 input (lvds) mrst4cn qspi4 input (lvds) arx3gn asclin3 input (lvds) emgstopb scu input rxdn hsct input (lvds) p21.2 o0 general-purpose output tout53 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved ethmdc o5 eth output sdrama8 o6 ebu output ? o7 reserved table 2-63 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-262 v 1.1 2015-05 j19 p21.3 i lvdsh_p/ pu1 / vddp3 general-purpose input tin54 gtm input mrst2cp qspi2 input (lvds) mrst4cp qspi4 input (lvds) arx3gp asclin3 input (lvds) rxdp hsct input (lvds) p21.3 o0 general-purpose output tout54 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama9 o6 ebu output ? o7 reserved ethmdiod hwout eth input/output k20 p21.4 i lvdsh_n/ pu1 / vddp3 general-purpose input tin55 gtm input p21.4 o0 general-purpose output tout55 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved sdrama10 o6 ebu output ? o7 reserved txdn hsct hsct output (lvds) j20 p21.5 i lvdsh_p/ pu1 / vddp3 general-purpose input tin56 gtm input p21.5 o0 general-purpose output tout56 o1 gtm output asclk3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved sdrama11 o6 ebu output ? o7 reserved txdp hsct hsct output (lvds) table 2-63 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-263 v 1.1 2015-05 h17 p21.6 i a2 / pu / vddp3 general-purpose input tin57 gtm input arx3f asclin3 input tgi2 ocds input tdi ocds (jtag) input t5euda gpt120 input p21.6 o0 general-purpose output tout57 o1 gtm output aslso3 o2 asclin3 output ? o3 reserved ? o4 reserved sysclk o5 hsct output sdrama12 o6 ebu output t3out o7 gpt120 output tgo2 hwout ocds; enx h16 p21.7 i a2 / pu / vddp3 general-purpose input tin58 gtm input dap2 ocds (3-pin dap) input in the 3-pin dap mode this pin is used as dap2. in the 2-pin dap mode this pin is used as p21.7 and controlled by the related port control logic tgi3 ocds input ethrxerb eth input t5ina gpt120 input p21.7 o0 general-purpose output tout58 o1 gtm output atx3 o2 asclin3 output asclk3 o3 asclin3 output ? o4 reserved ? o5 reserved sdrama13 o6 ebu output t6out o7 gpt120 output tgo3 hwout ocds; enx tdo ocds (jtag); enx the jtag tdo function is overlayed with p21.7 via a double bond. in jtag mode this pin is used as tdo, after power-on reset it is highz. dap2 ocds (3-pin dap); enx in the 3-pin dap mode this pin is used as dap2. table 2-63 port 21 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-264 v 1.1 2015-05 table 2-64 port 22 functions pin symbol ctrl type function p20 p22.0 i lvdsm_n / pu1 / vext general-purpose input tin47 gtm input mtsr4b qspi4 input p22.0 o0 general-purpose output tout47 o1 gtm output atx3n o2 asclin3 output (lvds) mtsr4 o3 qspi4 output sclk4n o4 qspi4 output (lvds) fcln1 o5 msc1 output (lvds) fclnd1 o6 msc1 output (lvds) ? o7 reserved p19 p22.1 i lvdsm_p / pu1 / vext general-purpose input tin48 gtm input mrst4b qspi4 input p22.1 o0 general-purpose output tout48 o1 gtm output atx3p o2 asclin3 output (lvds) mrst4 o3 qspi4 output sclk4p o4 qspi4 output (lvds) fclp1 o5 msc1 output (lvds) ? o6 reserved ? o7 reserved r20 p22.2 i lvdsm_n / pu1 / vext general-purpose input tin49 gtm input slsi4b qspi4 input p22.2 o0 general-purpose output tout49 o1 gtm output ? o2 reserved slso43 o3 qspi4 output mtsr4n o4 qspi4 output (lvds) son1 o5 msc1 output (lvds) sond1 o6 msc1 output (lvds) ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-265 v 1.1 2015-05 r19 p22.3 i lvdsm_p / pu1 / vext general-purpose input tin50 gtm input sclk4b qspi4 input p22.3 o0 general-purpose output tout50 o1 gtm output ? o2 reserved sclk4 o3 qspi4 output mtsr4p o4 qspi4 output (lvds) sop1 o5 msc1 output (lvds) ? o6 reserved ? o7 reserved p16 p22.4 i lp / pu1 / vext general-purpose input tin130 gtm input p22.4 o0 general-purpose output tout130 o1 gtm output ? o2 reserved ? o3 reserved slso012 o4 qspi0 output psitx4 o5 psi5 output ? o6 reserved ? o7 reserved p17 p22.5 i lp / pu1 / vext general-purpose input tin131 gtm input mtsr0c qspi0 input psirx4b psi5 input p22.5 o0 general-purpose output tout131 o1 gtm output ? o2 reserved ? o3 reserved mtsr0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-64 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-266 v 1.1 2015-05 n16 p22.6 i lp / pu1 / vext general-purpose input tin132 gtm input mrst0c qspi0 input p22.6 o0 general-purpose output tout132 o1 gtm output ? o2 reserved ? o3 reserved mrst0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved n17 p22.7 i lp / pu1 / vext general-purpose input tin133 gtm input sclk0c qspi0 input p22.7 o0 general-purpose output tout133 o1 gtm output ? o2 reserved ? o3 reserved sclk0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved m16 p22.8 i lp / pu1 / vext general-purpose input tin134 gtm input sclk0b qspi0 input p22.8 o0 general-purpose output tout134 o1 gtm output ? o2 reserved ? o3 reserved sclk0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-64 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-267 v 1.1 2015-05 m17 p22.9 i lp / pu1 / vext general-purpose input tin135 gtm input mrst0b qspi0 input p22.9 o0 general-purpose output tout135 o1 gtm output ? o2 reserved ? o3 reserved mrst0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved l16 p22.10 i lp / pu1 / vext general-purpose input tin136 gtm input mtsr0b qspi0 input p22.10 o0 general-purpose output tout136 o1 gtm output ? o2 reserved ? o3 reserved mtsr0 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved l17 p22.11 i lp / pu1 / vext general-purpose input tin137 gtm input p22.11 o0 general-purpose output tout137 o1 gtm output ? o2 reserved ? o3 reserved slso010 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved table 2-64 port 22 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-268 v 1.1 2015-05 table 2-65 port 23 functions pin symbol ctrl type function v20 p23.0 i lp / pu1 / vext general-purpose input tin41 gtm input p23.0 o0 general-purpose output tout41 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved u19 p23.1 i mp+ / pu1 / vext general-purpose input tin42 gtm input sdi10 msc1 input p23.1 o0 general-purpose output tout42 o1 gtm output arts1 o2 asclin1 output slso46 o3 qspi4 output gtmclk0 o4 gtm output ? o5 reserved extclk0 o6 scu output ? o7 reserved u20 p23.2 i lp / pu1 / vext general-purpose input tin43 gtm input p23.2 o0 general-purpose output tout43 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-269 v 1.1 2015-05 t19 p23.3 i lp / pu1 / vext general-purpose input tin44 gtm input inj10 msc1 input p23.3 o0 general-purpose output tout44 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved t20 p23.4 i mp+ / pu1 / vext general-purpose input tin45 gtm input p23.4 o0 general-purpose output tout45 o1 gtm output ? o2 reserved slso45 o3 qspi4 output end12 o4 msc1 output en10 o5 msc1 output ? o6 reserved ? o7 reserved t17 p23.5 i mp+ / pu1 / vext general-purpose input tin46 gtm input p23.5 o0 general-purpose output tout46 o1 gtm output ? o2 reserved slso44 o3 qspi4 output end13 o4 msc1 output en11 o5 msc1 output ? o6 reserved ? o7 reserved table 2-65 port 23 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-270 v 1.1 2015-05 r17 p23.6 i lp / pu1 / vext general-purpose input tin138 gtm input p23.6 o0 general-purpose output tout138 o1 gtm output ? o2 reserved ? o3 reserved slso011 o4 qspi0 output ? o5 reserved ? o6 reserved ? o7 reserved r16 p23.7 i lp / pu1 / vext general-purpose input tin139 gtm input p23.7 o0 general-purpose output tout139 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-66 port 32 functions pin symbol ctrl type function y17 p32.0 i lp / px/ vext general-purpose input tin36 gtm input fdest pmu input vgate1n smps mode: analog output. external pass device gate control for evr13 p32.0 o0 general-purpose output tout36 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved table 2-65 port 23 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-271 v 1.1 2015-05 y18 p32.2 i lp / pu1 / vext general-purpose input tin38 gtm input arx3d asclin3 input rxdcan3b can node 3 input rxdcanr1d can node 1 input (multicanr+) p32.2 o0 general-purpose output tout38 o1 gtm output atx3 o2 asclin3 output ? o3 reserved ? o4 reserved ? o5 reserved dcdcsync o6 scu output ? o7 reserved y19 p32.3 i lp / pu1 / vext general-purpose input tin39 gtm input p32.3 o0 general-purpose output tout39 o1 gtm output atx3 o2 asclin3 output ? o3 reserved asclk3 o4 asclin3 output txdcan3 o5 can node 3 output txdcanr1 o6 can node 1 output (multicanr+) ? o7 reserved w18 p32.4 i mp+ / pu1 / vext general-purpose input tin40 gtm input acts1b asclin1 input sdi12 msc1 input p32.4 o0 general-purpose output tout40 o1 gtm output ? o2 reserved end12 o3 msc1 output gtmclk1 o4 gtm output en10 o5 msc1 output extclk1 o6 scu output cout63 o7 ccu60 output table 2-66 port 32 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-272 v 1.1 2015-05 t15 p32.5 i lp / pu1 / vext general-purpose input tin140 gtm input p32.5 o0 general-purpose output tout140 o1 gtm output atx2 o2 asclin2 output ? o3 reserved ? o4 reserved ? o5 reserved txdcan2 o6 can node 2 output ? o7 reserved u15 p32.6 i lp / pu1 / vext general-purpose input tgi4 ocds input tin141 gtm input rxdcan2c can node 2 input arx2f asclin2 input p32.6 o0 general-purpose output tout141 o1 gtm output ? o2 reserved ? o3 reserved slso212 o4 qspi2 output ? o5 reserved ? o6 reserved ? o7 reserved tgo4 hwou t ocds; enx u16 p32.7 i lp / pu1 / vext general-purpose input tin142 gtm input tgi5 ocds input p32.7 o0 general-purpose output tout142 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved ? o7 reserved tgo5 hwou t ocds; enx table 2-66 port 32 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-273 v 1.1 2015-05 table 2-67 port 33 functions pin symbol ctrl type function w10 p33.0 i lp / pu1 / vext general-purpose input tin22 gtm input dsitr0e dsadc channel 0 input e p33.0 o0 general-purpose output tout22 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved vadcg2bfl0 o6 vadc output ? o7 reserved y10 p33.1 i lp / pu1 / vext general-purpose input tin23 gtm input psirx0c psi5 input sent9c sent input dscin2b dsadc channel 2 input b dsitr1e dsadc channel 1 input e p33.1 o0 general-purpose output tout23 o1 gtm output aslso3 o2 asclin3 output sclk2 o3 qspi2 output dscout2 o4 dsadc channel 2 output vadcemux02 o5 vadc output vadcg2bfl1 o6 vadc output ? o7 reserved w11 p33.2 i lp / pu1 / vext general-purpose input tin24 gtm input sent8c sent input dsdin2b dsadc channel 2 input b dsitr2e dsadc channel 2 input e p33.2 o0 general-purpose output tout24 o1 gtm output asclk3 o2 asclin3 output slso210 o3 qspi2 output psitx0 o4 psi5 output vadcemux01 o5 vadc output vadcg2bfl2 o6 vadc output ? o7 reserved tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-274 v 1.1 2015-05 y11 p33.3 i lp / pu1 / vext general-purpose input tin25 gtm input psirx1c psi5 input sent7c sent input dscin1b dsadc channel 1 input b p33.3 o0 general-purpose output tout25 o1 gtm output ? o2 reserved ? o3 reserved dscout1 o4 dsadc channel 1 output vadcemux00 o5 vadc output vadcg2bfl3 o6 vadc output ? o7 reserved w12 p33.4 i lp / pu1 / vext general-purpose input tin26 gtm input sent6c sent input ctrapc ccu61 input dsdin1b dsadc channel 1 input dsitr0f dsadc channel 0 input f p33.4 o0 general-purpose output tout26 o1 gtm output arts2 o2 asclin2 output slso212 o3 qspi2 output psitx1 o4 psi5 output vadcemux12 o5 vadc output vadcg0bfl0 o6 vadc output ? o7 reserved table 2-67 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-275 v 1.1 2015-05 y12 p33.5 i lp / pu1 / vext general-purpose input tin27 gtm input acts2b asclin2 input psirx2c psi5 input psisrxc psi5-s input sent5c sent input ccpos2c ccu61 input t4eudb gpt120 input dscin0b dsadc channel 0 input b dsitr1f dsadc channel 1 input f p33.5 o0 general-purpose output tout27 o1 gtm output slso07 o2 qspi0 output slso17 o3 qspi1 output dscout0 o4 dsadc channel 0 output vadcemux11 o5 vadc output vadcg0bfl1 o6 vadc output ? o7 reserved w13 p33.6 i lp / pu1 / vext general-purpose input tin28 gtm input sent4c sent input ccpos1c ccu61 input t2eudb gpt120 input dsdin0b dsadc channel 0 input b dsitr2f dsadc channel 2 input f p33.6 o0 general-purpose output tout28 o1 gtm output aslso2 o2 asclin2 output slso211 o3 qspi2 output psitx2 o4 psi5 output vadcemux10 o5 vadc output vadcg1bfl0 o6 vadc output psistx o7 psi5-s output table 2-67 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-276 v 1.1 2015-05 y13 p33.7 i lp / pu1 / vext general-purpose input tin29 gtm input rxdcan0e can node 0 input req8 scu input ccpos0c ccu61 input t2inb gpt120 input p33.7 o0 general-purpose output tout29 o1 gtm output asclk2 o2 asclin2 output slso47 o3 qspi4 output ? o4 reserved ? o5 reserved vadcg1bfl1 o6 vadc output ? o7 reserved w14 p33.8 i mp / highz / vext general-purpose input tin30 gtm input arx2e asclin2 input emgstopa scu input p33.8 o0 general-purpose output tout30 o1 gtm output atx2 o2 asclin2 output slso42 o3 qspi4 output ? o4 reserved txdcan0 o5 can node 0 output ? o6 reserved cout62 o7 ccu61 output smufsp hwou t smu y14 p33.9 i lp / pu1 / vext general-purpose input tin31 gtm input hsic3ina qspi3 input p33.9 o0 general-purpose output tout31 o1 gtm output atx2 o2 asclin2 output slso41 o3 qspi4 output asclk2 o4 asclin2 output ? o5 reserved ? o6 reserved cc62 o7 ccu61 output table 2-67 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-277 v 1.1 2015-05 w15 p33.10 i mp / pu1 / vext general-purpose input tin32 gtm input slsi4a qspi4 input hsic3inb qspi3 input p33.10 o0 general-purpose output tout32 o1 gtm output slso16 o2 qspi1 output slso40 o3 qspi4 output aslso1 o4 asclin1 output psisclk o5 psi5-s output ? o6 reserved cout61 o7 ccu61 output y15 p33.11 i mp / pu1 / vext general-purpose input tin33 gtm input sclk4a qspi4 input p33.11 o0 general-purpose output tout33 o1 gtm output asclk1 o2 asclin1 output sclk4 o3 qspi4 output ? o4 reserved ? o5 reserved dscgpwmn o6 dsadc channel output cc61 o7 ccu61 output w16 p33.12 i mp / pu1 / vext general-purpose input tin34 gtm input mtsr4a qspi4 input p33.12 o0 general-purpose output tout34 o1 gtm output atx1 o2 asclin1 output mtsr4 o3 qspi4 output asclk1 o4 asclin1 output ? o5 reserved dscgpwmp o6 dsadc output cout60 o7 ccu61 output table 2-67 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-278 v 1.1 2015-05 y16 p33.13 i mp / pu1 / vext general-purpose input tin35 gtm input arx1f asclin1 input mrst4a qspi4 input dssgnb dsadc channel input b inj11 msc1 input p33.13 o0 general-purpose output tout35 o1 gtm output atx1 o2 asclin1 output mrst4 o3 qspi4 output slso26 o4 qspi2 output ? o5 reserved dcdcsync o6 scu output cc60 o7 ccu61 output t14 p33.14 i lp / pu1 / vext general-purpose input tin143 gtm input tgi6 ocds input sclk2d qspi2 input p33.14 o0 general-purpose output tout143 o1 gtm output ? o2 reserved sclk2 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cc62 o7 ccu60 output tgo6 hwou t ocds; enx table 2-67 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-279 v 1.1 2015-05 u14 p33.15 i lp / pu1 / vext general-purpose input tin144 gtm input tgi7 ocds input p33.15 o0 general-purpose output tout144 o1 gtm output ? o2 reserved slso211 o3 qspi2 output ? o4 reserved ? o5 reserved ? o6 reserved cout62 o7 ccu60 output tgo7 hwou t ocds; enx table 2-68 port 34 functions pin symbol ctrl type function u11 p34.1 i lp / pu1 / vext general-purpose input tin146 gtm input p34.1 o0 general-purpose output tout146 o1 gtm output atx0 o2 asclin0 output ? o3 reserved txdcan0 o4 can node 0 output txdcanr0 o5 can node 0 output (multicanr+) ? o6 reserved cout63 o7 ccu60 output t12 p34.2 i lp / pu1 / vext general-purpose input tin147 gtm input arx0d asclin0 input rxdcan0g can node 0 input rxdcanr0c can node 0 input (multicanr+) p34.2 o0 general-purpose output tout147 o1 gtm output ? o2 reserved ? o3 reserved ? o4 reserved ? o5 reserved ? o6 reserved cc60 o7 ccu60 output table 2-67 port 33 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-280 v 1.1 2015-05 u12 p34.3 i lp / pu1 / vext general-purpose input tin148 gtm input p34.3 o0 general-purpose output tout148 o1 gtm output ? o2 reserved ? o3 reserved slso210 o4 qspi2 output ? o5 reserved ? o6 reserved cout60 o7 ccu60 output t13 p34.4 i lp / pu1 / vext general-purpose input tin149 gtm input mrst2d qspi2 input p34.4 o0 general-purpose output tout149 o1 gtm output ? o2 reserved ? o3 reserved mrst2 o4 qspi2 output ? o5 reserved ? o6 reserved cc61 o7 ccu60 output u13 p34.5 i lp / pu1 / vext general-purpose input tin150 gtm input mtsr2d qspi2 input p34.5 o0 general-purpose output tout150 o1 gtm output ? o2 reserved ? o3 reserved mtsr2 o4 qspi2 output ? o5 reserved ? o6 reserved cout61 o7 ccu60 output table 2-68 port 34 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-281 v 1.1 2015-05 table 2-69 port 40 functions pin symbol ctrl type function w2 p40.0 i s / highz / vddm general-purpose input vadcg3.0 vadc analog input channel 0 of group 3 ds2pb dsadc: positive analog input of channel 2, pin b ccpos0d ccu60 input sent0a sent input w1 p40.1 i s / highz / vddm general-purpose inpu.t vadcg3.1 vadc analog input channel 1 of group 3 (md) ds2nb dsadc: negative analog input channel 2, pin b ccpos1b ccu60 input sent1a sent input v2 p40.2 i s / highz / vddm general-purpose inpu.t vadcg3.2 vadc analog input channel 2 of group 3 (md) ccpos1d ccu60 input sent2a sent input v1 p40.3 i s / highz / vddm general-purpose input vadcg3.3 vadc analog input channel 3 of group 3 (with pull down diagnostics) ccpos2b ccu60 input sent3a sent input p4 p40.4 i s / highz / vddm general-purpose input vadcg4.0 vadc analog input channel 0 of group 4 ccpos2d ccu60 input sent4a sent input r1 p40.5 i s / highz / vddm general-purpose input vadcg4.1 vadc analog input channel 1 of group 4 (md) ccpos0d ccu61 input sent5a sent input n4 p40.6 i s / highz / vddm general-purpose input vadcg4.4 vadc analog input channel 4 of group 4 ds3pa dsadc: positive analog input of channel 3, pin a ccpos1b ccu61 input sent6a sent input p2 p40.7 i s / highz / vddm general-purpose input vadcg4.5 vadc analog input channel 5 of group 4 ds3na dsadc: negative analog input channel 3, pin a ccpos1d ccu61 input sent7a sent input tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-282 v 1.1 2015-05 n5 p40.8 i s / highz / vddm general-purpose input vadcg4.6 vadc analog input channel 6 of group 4 ds3pb dsadc: positive analog input of channel 3, pin b ccpos2b ccu61 input sent8a sent input p1 p40.9 i s / highz / vddm general-purpose input vadcg4.7 vadc analog input channel 7 of group 4 ds3nb dsadc: negative analog input channel 3, pin b ccpos2d ccu61 input sent9a sent input table 2-70 analog inputs pin symbol ctrl type function t10 an0 i d / highz / vddm analog input 0 vadcg0.0 vadc analog input channel 0 of group 0 ds1pa dsadc: positive analog input of channel 1, pin a u10 an1 i d / highz / vddm analog input 1 vadcg0.1 vadc analog input channel 1 of group 0 (md) ds1na dsadc: negative analog input channel 1, pin a w9 an2 i d / highz / vddm analog input 2 vadcg0.2 vadc analog input channel 2 of group 0 (md) ds0pa dsadc: positive analog input of channel 0, pin a u9 an3 i d / highz / vddm analog input 3 vadcg0.3 vadc analog input channel 3 of group 0 ds0na dsadc: negative analog input channel 0, pin a t9 an4 i d / highz / vddm analog input 4 vadcg0.4 vadc analog input channel 4 of group 0 y9 an5 i d / highz / vddm analog input 5 vadcg0.5 vadc analog input channel 5 of group 0 t8 an6 i d / highz / vddm analog input 6 vadcg0.6 vadc analog input channel 6 of group 0 u8 an7 i d / highz / vddm analog input 7 vadcg0.7 vadc analog input channel 7 of group 0 (with pull down diagnostics) w8 an8 i d / highz / vddm analog input 8 vadcg1.0 vadc analog input channel 0 of group 1 u7 an9 i d / highz / vddm analog input 9 vadcg1.1 vadc analog input channel 1 of group 1 (md) table 2-69 port 40 functions (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-283 v 1.1 2015-05 y8 an10 i d / highz / vddm analog input 10 vadcg1.2 vadc analog input channel 2 of group 1 (md) w7 an11 i d / highz / vddm analog input 11 vadcg1.3 vadc analog input channel 3 of group 1 (with pull down diagnostics) t7 an12 i d / highz / vddm analog input 12 vadcg1.4 vadc analog input channel 4 of group 1 w6 an13 i d / highz / vddm analog input 13 vadcg1.5 vadc analog input channel 5 of group 1 u6 an14 i d / highz / vddm analog input 14 vadcg1.6 vadc analog input channel 6 of group 1 t6 an15 i d / highz / vddm analog input 15 vadcg1.7 vadc analog input channel 7 of group 1 w5 an16 i d / highz / vddm analog input 16 vadcg2.0 vadc analog input channel 0 of group 2 u5 an17 i d / highz / vddm analog input 17 vadcg2.1 vadc analog input channel 1 of group 2 (md) w4 an18 i d / highz / vddm analog input 18 vadcg2.2 vadc analog input channel 2 of group 2 (md) w3 an19 i d / highz / vddm analog input 19 vadcg2.3 vadc analog input channel 3 of group 2 (with pull down diagnostics) y3 an20 i d / highz / vddm analog input 20 vadcg2.4 vadc analog input channel 4 of group 2 ds2pa dsadc: positive analog input of channel 2, pin a y2 an21 i d / highz / vddm analog input 21 vadcg2.5 vadc analog input channel 5 of group 2 ds2na dsadc: negative analog input channel 2, pin a t5 an22 i d / highz / vddm analog input 22 vadcg2.6 vadc analog input channel 6 of group 2 r5 an23 i d / highz / vddm analog input 23 vadcg2.7 vadc analog input channel 7 of group 2 w2 an24 i s / highz / vddm analog input 24 vadcg3.0 vadc analog input channel 0 of group 3 ds2pb dsadc: positive analog input of channel 2, pin b sent0a sent input channel 0, pin a table 2-70 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-284 v 1.1 2015-05 w1 an25 i s / highz / vddm analog input 24 vadcg3.1 vadc analog input channel 1 of group 3 (md) ds2nb dsadc: negative analog input channel 2, pin b sent1a sent input channel 1, pin a v2 an26 i s / highz / vddm analog input 26 vadcg3.2 vadc analog input channel 2 of group 3 (md) sent2a sent input channel 2, pin a v1 an27 i s / highz / vddm analog input 27 vadcg3.3 vadc analog input channel 3 of group 3 (with pull down diagnostics) sent3a sent input channel 3, pin a u2 an28 i d / highz / vddm analog input 28 vadcg3.4 vadc analog input channel 4 of group 3 (with pull down diagnostics) u1 an29 i d / highz / vddm analog input 29 vadcg3.5 vadc analog input channel 5 of group 3 (with pull down diagnostics) t4 an30 i d / highz / vddm analog input 30 vadcg3.6 vadc analog input channel 6 of group 3 r4 an31 i d / highz / vddm analog input 31 vadcg3.7 vadc analog input channel 7 of group 3 p4 an32 i s / highz / vddm analog input 32 vadcg4.0 vadc analog input channel 0 of group 4 sent4a sent input channel 4, pin a r1 an33 i s / highz / vddm analog input 33 vadcg4.1 vadc analog input channel 1 of group 4 (md) sent5a sent input channel 5, pin a p5 an34 i d / highz / vddm analog input 34 vadcg4.2 vadc analog input channel 2 of group 4 (md) r2 an35 i d / highz / vddm analog input 35 vadcg4.3 vadc analog input channel 3 of group 4 (with pull down diagnostics) n4 an36 i s / highz / vddm analog input 34 vadcg4.4 vadc analog input channel 4 of group 4 ds3pa dsadc: positive analog input of channel 3, pin a sent6a sent input channel 6, pin a table 2-70 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-285 v 1.1 2015-05 p2 an37 i s / highz / vddm analog input 37 vadcg4.5 vadc analog input channel 5 of group 4 ds3na dsadc: negative analog input channel 3, pin a sent7a sent input channel 7, pin a n5 an38 i s / highz / vddm analog input 38 vadcg4.6 vadc analog input channel 6 of group 4 ds3pb dsadc: positive analog input of channel 3, pin b sent8a sent input channel 8, pin a p1 an39 i s / highz / vddm analog input 39 vadcg4.7 vadc analog input channel 7 of group 4 ds3nb dsadc: negative analog input channel 3, pin b sent9a sent input channel 9, pin a m5 an40 i d / highz / vddm analog input 40 vadcg5.0 vadc analog input channel 0 of group 5 m4 an41 i d / highz / vddm analog input 41 vadcg5.1 vadc analog input channel 1 of group 5 (md) l5 an42 i d / highz / vddm analog input 42 vadcg5.2 vadc analog input channel 2 of group 5 (md) l4 an43 i d / highz / vddm analog input 43 vadcg5.3 vadc analog input channel 3 of group 5 (with pull down diagnostics) n1 an44 i d / highz / vddm analog input 44 vadcg5.4 vadc analog input channel 4 of group 5 ds3pc dsadc: positive analog input of channel 3, pin c n2 an45 i d / highz / vddm analog input 45 vadcg5.5 vadc analog input channel 5 of group 5 ds3nc dsadc: negative analog input channel 3, pin c m1 an46 i d / highz / vddm analog input 46 vadcg5.6 vadc analog input channel 6 of group 5 ds3pd dsadc: positive analog input of channel 3, pin d m2 an47 i d / highz / vddm analog input 47 vadcg5.7 vadc analog input channel 7 of group 5 ds3nd dsadc: negative analog input channel 3, pin d table 2-70 analog inputs (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-286 v 1.1 2015-05 table 2-71 system i/o pin symbol ctrl type function g17 porst i porst / pd / vext power on reset input additional strong pd in case of power fail. f16 esr0 i/o mp / od / vext external system request reset 0 default configuration during and after reset is open- drain driver. the driver drives low during power-on reset. this is valid additi onally after deactivation of porst until the internal reset phase has finished. see also scu chapter for details. default after power-on can be different. see also scu chapter reset cont rol unit and scu_iocr register description. evrwup i evr wakeup pin g16 esr1 i/o mp / pu1 / vext external system request reset 1 default nmi function. see also scu chapter reset control unit and scu_iocr register description. evrwup i evr wakeup pin w17 vgate1p o vgate1p / - / vext external pass device gate control for evr13 k16 tms i a2 / pd / vddp3 jtag module state machine control input dap1 i/o device access port line 1 l19 trst i a2 / pd / vddp3 jtag module reset/enable input j16 tck i a2 / pd / vddp3 jtag module clock input dap0 i device access port line 0 m20 xtal1 i xtal1 / - / vddp3 main oscillator/pll/ clock genera tor input m19 xtal2 o xtal2 / - / vddp3 main oscillator/pll/ clock generator output table 2-72 supply pin symbol ctrl type function y6 varef1 i vx positive analog reference voltage 1 y7 vagnd1 i vx negative analog reference voltage 1 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-287 v 1.1 2015-05 t1 varef2 i vx positive analog reference voltage 2 t2 vagnd2 i vx negative analog reference voltage 2 y5 vddm i vx adc analog power supply (3.3v / 5v) g8, h7 vdd / vddsb i vx emulation device: emulation sram standby power supply (1.3v) (emulation device only). production device: vdd (1.3v). p8, p13, n7, n14, h14, g13 vdd i vx digital core power supply (1.3v) n19 vdd i vx digital core power supply (1.3v). the supply pin inturn supplies the main xtal oscillator/pll (1.3v) . a higher decoupling capacitor is therefore recommended to the vss pin for better noise immunity. a2, b3, v19, w20 vext i vx external power supply (5v / 3.3v) b18, a19 vddp3 i vx digital power supply for flash (3.3v). can be also used as external 3.3v power supply for vflex. n20 vddp3 i vx digital power supply for oscillator, lvdsh and a2 pads (3.3v). the supply pin inturn supplies the main xtal oscillator/pll (3.3v) . a higher decoupling capacitor is therefore recommended to the vss pin for better noise immunity. e15, d16 vddfl3 i vx flash power supply (3.3v) d5 vflex i vx digital power supply for flex port pads (5v / 3.3v) y4 vssm i vx analog ground for vddm t11 vevrsb i vx standby power supply (3.3v/5v) for the standby sram (cpu0.dspr). if standby mode is not used: to be handled like vext (3.3v/5v). b2, d4, e5, t16, u17, w19, y20, e16, d17, b19, a20, l20 vss i vx digital ground (outer balls) p9, p12, n9, n10, n11, n12 vss i vx digital ground (center balls) table 2-72 supply (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-288 v 1.1 2015-05 m7, m8, m10, m11, m13, m14 vss i vx digital ground (center balls) l8, l9, l10, l11, l12, l13 vss i vx digital ground (center balls) k8, k9, k10, k11, k12, k13 vss i vx digital ground (center balls) j7, j8, j10, j11, j13, j14 vss i vx digital ground (center balls) h9, h10, h11, h12, g9, g10, g11, g12 vss i vx digital ground (center balls) p10 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt tx0n p11 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt tx0p l7 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt clkn k7 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt clkp l14 vss i vx digital ground (center balls) this ball is used in the emulation device as agbt err k14 nc / vddpsb i ncvdd psb emulation device: power supply (3.3v) for dap/jtag pad group. can be connected to vddp or can be left unsupplied (see document aurixed / aurix emulation devi ces specification. production device: this pin is not connected on package level. it can be connected on pcb level to vddp or ground or can be left unsupplied. a1, y1, u4 nc i nc1 not connected. these pins are not connected on package level and will not be used for future extensions. table 2-72 supply (cont?d) pin symbol ctrl type function tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-289 v 1.1 2015-05 legend: column ? ctrl. ?: i = input (for gpio port lines with iocr bit field selection pcx = 0xxx b ) o = output o0 = output with iocr bit field selection pcx = 1x000 b o1 = output with iocr bit field selection pcx = 1x001 b (alt1) o2 = output with iocr bit field selection pcx = 1x010 b (alt2) o3 = output with iocr bit field selection pcx = 1x011 b (alt3) o4 = output with iocr bit field selection pcx = 1x100 b (alt4) o5 = output with iocr bit field selection pcx = 1x101 b (alt5) o6 = output with iocr bit field selection pcx = 1x110 b (alt6) o7 = output with iocr bit field selection pcx = 1x111 b (alt7) column ? type ?: lp = pad class lp (5v/3.3v, class lp parameters for digital input / output and class d parameters for analog input function) mp = pad class mp (5v/3.3v) mp+ = pad class mp+ (5v/3.3v) mpr = pad class mpr (5v/3.3v) a2 = pad class a2 (3.3v) lvdsm = pad class lvdsm (5v/3.3v) lvdsh = pad class lvdsh (3.3v) s = pad class s (class s parameters for digital input and class d parameters for analog input function) d = pad class d (vadc / dsadc) pu = with pull-up device connected during reset (porst = 0) pu1 = with pull-up device connected during reset (porst = 0) 1) 2) 3) pd = with pull-down device connected during reset (porst = 0) pd1 = with pull-down device connected during reset (porst = 0) 1) 2) 3) px = behavior depends on usage: pd in evr13 smps mode and pu1 in gpio mode od = open drain during reset (porst = 0) highz = tri-state during reset (porst = 0) porst = porst input pad xtal1 = xtal1 input pad xtal2 = xtal2 input pad vgate1p = vgate1p vgate3p = vgate3p vx = supply nc = these pins are reserved for future extensions and shall not be connected externally nc1 = these pins are not connecte d on package level and will not be used for future extensions ncvddpsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. ncvddsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. 1) the default state of gpios (p x.y) during and after porst active is contro llled via hwcfg[6] (p14.4). hwcfg[6] has a weak internal pull-up active at start-up if the pin is le ft unconnected.see also users manual, ?introduction chapter?, ?general purpose i/o ports and peripheral i/o lines?, figur e: ?default state of port pins during and after reset?. 2) if hwcfg[6] is left unconnected or is externally pulled high, weak internal pull-ups (pu1) / pull-downs (pd1) are active during and after reset. 3) if hwcfg[6] is connected to ground, the pd1 / pu1 pins are predominantly in highz during and after reset. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-290 v 1.1 2015-05 2.3.2 emergency stop function the emergency stop function can be used to force gpios (g eneral purpose inputs/outputs) via an external input signal (emgstopa or emgstopb) into a defined state: ? input state and ? pu or high-z depending on hwcfg[6] level latched during porst active control of the emergency stop function: ? the emergency stop function can be enabled/disable d in the scu (see chapter ?scu?, ?emergency stop control?) ? the emergency stop input signal, emgstopa (p33.8) / emgsto pb (p21.2) , can selected in the scu (see chapter ?scu?, ?emergency stop control?) ? on port level, each gpio can be enabled/disabled fo r the emergency stop function via the px_esr (port x emergency stop) registers in the port control logic (s ee chapter ?general purpose i/o ports and peripheral i/o lines?, ?emergency stop register?). the emergency stop function is available for all gpio ports with th e following exceptions: ? not available for p20.2 (general purpose input/gpi only, overlayed with testmode) ? not available for p40.x (analoge input anx overlayed with gpi) ? not available for p32.0 evr13 smps mode. ? not available for dedicated i/o without general purpose output function (e.g esrx, tms, tck) the emergency stop function can be ov erruled on the following gpio ports: ? p00.x and p02.x: emergency stop can be overruled by the 8-bit standby controller (sbr), if implemented. overruling can be disabled via the control registers p00_scr / p02_scr (see chapter ?general purpose i/o ports and peripheral i/o lines?, p00 / p01) ? p00.x: emergency stop can be overruled by the vadc. overruling can be disabled via the control register p00_scr (see chapter ?general purpose i/ o ports and peripheral i/o lines?, p00) ? p14.0 and p14.1: emergency stop can be overruled in the dxcpl mode (dap over can physical layer mode). no overruling in the dxcm (debug over can message) mode ? p21.6: emergency stop can be overruled in jtag mode if this pin is used as tdi ? p21.7: emergency stop can be overruled in jtag or three pin dap mode ? p20.0: emergency stop can be overruled in jt ag mode if this gpio is used as tdi ? p33.8: emergency stop can be overruled if this pin is used as safety output pin (smufsp) 2.3.3 pull-up/pull-down r eset behavior of the pins table 2-73 list of pull-up/pull-down reset behavior of the pins pins porst = 0 porst = 1 all gpios pull-up if hwcfg[6] = 1 or high-z if hwcfg[6] = 0 tdi , testmode pull-up porst 1) pull-down with i porst relevant pull-down with i pdli relevant trst , tck, tms pull-down esr0 the open-drain driver is used to drive low. 2) pull-up 3) tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionsTC297x pin definition and functions: data sheet 2-291 v 1.1 2015-05 in case of leakage test (porst = 0 and testmode = 0), the pull-down of the trst pin is switched off. in case of an user application (testmode = 1), the pull-down of the trst is always switched on. esr1 pull-up 3) tdo pull-up high-z/pull-up 4) 1) pull-down with i porst relevant is always activated when a pr imary supply monitor detects a violation. 2) valid additionally after deactivation of porst until the internal reset phase has finished. see the scu chapter for details. 3) see the scu_iocr register description. 4) depends on jtag/dap selection with trst . table 2-73 list of pull-up/pull-down reset behavior of the pins pins porst = 0 porst = 1 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-292 v 1.1 2015-05 2.4 tc29x bare di e pad definition the tc290 / TC297 / tc298 / tc299 bb-step bare die logic symbol is shown in figure 2-4 . table 2-74 describes the pads of the tc290 / TC297 / tc298 / tc299 bare die. it describes also the mapping of vadc / ds-adc channels to the anal og inputs (anx) and the mapping of port functions to the pads. the detailed description of the port functions (px.y) ca n be found in the user?s manual chapter ?general purpose i/o ports and peripheral i/o lines (ports)?. figure 2-4 tc290 / TC297 / tc298 / tc2 99 logic symbol for the bare die. table 2-74 tc29x bare die pad list number pad name pad type x y comment 1 vext vx -4328000 -4295000 mu st be bonded to vext 2 p15.10 lp / pu1 / vext -4123000 -4186500 gpio 3 p15.2 mp / pu1 / vext -4193000 -4295000 gpio 4 p15.11 lp / pu1 / vext -3983000 -4186500 gpio 5 p15.4 mp / pu1 / vext -4053000 -4295000 gpio 6 p15.12 lp / pu1 / vext -3863000 -4186500 gpio 7 p15.1 lp / pu1 / vext -3923000 -4295000 gpio 8 p15.13 lp / pu1 / vext -3753000 -4186500 gpio 9 vss vx -3808000 -4295000 must be bonded to vss 10 p15.14 mp / pu1 / vext -3603000 -4186500 gpio 11 p15.3 mp / pu1 / vext -3683000 -4295000 gpio 12 p15.15 mp / pu1 / vext -3443000 -4186500 gpio pad 1 pad 101 pad 102 pad 233 pad 234 pad 366 pad 367 pad 480 0.0 x y tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-293 v 1.1 2015-05 13 p15.5 mp / pu1 / vext -3523000 -4295000 gpio 14 p15.6 mp / pu1 / vext -3283000 -4186500 gpio 15 p15.7 mp / pu1 / vext -3363000 -4295000 gpio 16 p15.8 mp / pu1 / vext -3153000 -4186500 gpio 17 vext vx -3218000 - 4295000 must be bonded to vext 18 p14.1 mp / pu1 / vext -3073000 -4295000 gpio 19 p14.0 mp+ / pu1 / vext -2983000 -4186500 gpio 20 p14.3 lp / pu1 / vext -2843000 -4186500 gpio 21 p14.2 lp / pu1 / vext -2 903000 -4295000 must be bonded to vext if evr13 active. must be bonded to vss if evr13 inactive. 22 p14.4 lp / pu1 / vext -2733000 -4186500 gpio 23 vss vx -2788000 -4295000 must be bonded to vss 24 vdd vx -2674000 -4295000 must be bonded to vdd 25 vss vx -2574000 -4295000 must be bonded to vss 26 vddfl3 vx -2505000 -4186500 must be bonded to vddp3 27 p14.11 lp / pu1 / vext -2380000 -4186500 gpio 28 vddfl3 vx -2437500 -4295000 must be bonded to vddp3 29 p14.5 mp+ / pu1 / vext -2300000 -4295000 gpio 30 p14.12 lp / pu1 / vext -2220000 -4186500 gpio 31 p14.6 mp+ / pu1 / vext -2140000 -4295000 gpio 32 p14.13 mp+ / pu1 / vext -2040000 -4186500 gpio 33 p14.7 lp / pu1 / vext -1960000 -4295000 gpio 34 p14.14 mp+ / pu1 / vext -1880000 -4186500 gpio 35 vext vx -1805000 - 4295000 must be bonded to vext 36 p14.8 lp / pu1 / vext -1750000 -4186500 gpio 37 p14.9 mp+ / pu1 / vext -1670000 -4295000 gpio 38 p14.15 lp / pu1 / vext -1590000 -4186500 gpio 39 p14.10 mp+ / pu1 / vext -1510000 -4295000 gpio 40 vddfl3 vx -1410000 -4186500 must be bonded to vddp3 41 vss vx -1345000 -4295000 must be bonded to vss 42 p13.0 lvdsm_n / pu1 / vext -1270000 -4186500 gpio table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-294 v 1.1 2015-05 43 p13.1 lvdsm_p / pu1 / vext -940000 -4186500 gpio 44 vext vx -865000 -4295000 mu st be bonded to vext 45 p13.2 lvdsm_n / pu1 / vext -790000 -4186500 gpio 46 p13.3 lvdsm_p / pu1 / vext -460000 -4186500 gpio 47 vss vx -385000 -4295000 must be bonded to vss 48 p13.4 lvdsm_n / pu1 / vext -310000 -4186500 gpio 49 p13.5 lvdsm_p / pu1 / vext 20000 -4186500 gpio 50 vext vx 95000 -4295000 must be bonded to vext 51 p13.6 lvdsm_n / pu1 / vext 170000 -4186500 gpio 52 p13.7 lvdsm_p / pu1 / vext 500000 -4186500 gpio 53 p13.11 lp / pu1 / vext 580000 -4295000 gpio 54 p13.12 lp / pu1 / vext 640000 -4186500 gpio 55 vddp3 vx 697500 -4295000 must be bonded to vddp3 56 vddp3 vx 765000 -4186500 must be bonded to vddp3 57 vext vx 830000 -4295000 mu st be bonded to vext 58 vext vx 880000 -4186500 mu st be bonded to vext 59 vdd vx 955000 -4295000 must be bonded to vdd 60 vss vx 1055000 -4295000 must be bonded to vss 61 p13.13 lp / pu1 / vext 1135000 -4186500 gpio 62 p13.9 mp / pu1 / vext 1205000 -4295000 gpio 63 p13.14 lp / pu1 / vext 1275000 -4186500 gpio 64 vext vx 1330000 -4295000 mu st be bonded to vext 65 p13.10 lp / pu1 / vext 1385000 -4186500 gpio 66 vddfl3 vx 1455000 -4295000 must be bonded to vddp3 67 vss vx 1575000 -4295000 must be bonded to vss (double pad / center of elephant pad opening) 68 vddfl3 vx 1542500 -4186500 must be bonded to vddp3 69 p13.15 lp / pu1 / vext 1660000 -4186500 gpio 70 p12.0 lp / pu1 / vflex 1790000 -4186500 gpio 71 p12.1 lp / pu1 / vflex 1850000 -4295000 gpio table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-295 v 1.1 2015-05 72 p11.0 mp+ / pu1 / vflex 1930000 -4186500 gpio 73 vss vx 2005000 -4295000 must be bonded to vss 74 p11.1 mp+ / pu1 / vflex 2080000 -4186500 gpio 75 vflex vx 2155000 -4295000 digital power supply for vflex ports / pads (5v / 3.3v) 76 p11.2 mpr/ pu1 / vflex 2230000 -4186500 gpio 77 p11.4 mp+ / pu1 / vflex 2330000 -4295000 gpio 78 p11.3 mpr/ pu1 / vflex 2430000 -4186500 gpio 79 p11.5 lp / pu1 / vflex 2510000 -4295000 gpio 80 p11.6 mpr/ pu1 / vflex 2590000 -4186500 gpio 81 vss vx 2665000 -4295000 must be bonded to vss 82 p11.9 mp+ / pu1 / vflex 2740000 -4186500 gpio 83 p11.7 lp / pu1 / vflex 2820000 -4295000 gpio 84 vflex vx 2935000 -4295000 digital power supply for vflex ports / pads (5v / 3.3v) 85 p11.8 lp / pu1 / vflex 2880000 -4186500 gpio 86 p11.13 lp / pu1 / vflex 3050000 -4295000 gpio 87 p11.10 lp / pu1 / vflex 2990000 -4186500 gpio 88 p11.11 mp+ / pu1 / vflex 3130000 -4186500 gpio 89 vss vx 3215000 -4295000 must be bonded to vss 90 p11.12 mpr/ pu1 / vflex 3300000 -4186500 gpio 91 p11.14 lp / pu1 / vflex 3390000 -4295000 gpio 92 p11.15 lp / pu1 / vflex 3460000 -4186500 gpio 93 p10.0 lp / pu1 / vext 3610000 -4295000 gpio 94 vext vx 3775000 -4295000 mu st be bonded to vext table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-296 v 1.1 2015-05 95 p10.9 lp / pu1 / vext 3680000 -4186500 gpio 96 p10.1 mp+ / pu1 / vext 3865000 -4186500 gpio 97 p10.3 mp / pu1 / vext 3970000 -4295000 gpio 98 p10.4 mp+ / pu1 / vext 4150000 -4295000 gpio 99 p10.10 lp / pu1 / vext 4055000 -4186500 gpio 100 p10.2 mp / pu1 / vext 4310000 -4295000 gpio 101 p10.11 lp / pu1 / vext 4240000 -4186500 gpio 102 p10.13 lp / pu1 / vext 4419500 -4050000 gpio 103 vss vx 4528000 -4105000 must be bonded to vss 104 p10.14 lp / pu1 / vext 4419500 -3930000 gpio 105 p10.5 lp / pu1 / vext 4528000 -3990000 gpio 106 p10.15 lp / pu1 / vext 4419500 -3810000 gpio 107 p10.6 lp / pu1 / vext 4528000 -3870000 gpio 108 p02.13 lp / pu1 / vext 4419500 -3690000 gpio 109 p10.8 lp / pu1 / vext 4528000 -3750000 gpio 110 p10.7 lp / pu1 / vext 4419500 -3580000 gpio 111 vext vx 4528000 -3635000 mu st be bonded to vext 112 vdd vx 4528000 -3520000 must be bonded to vdd 113 p02.12 lp / pu1 / vext 4419500 -3360000 gpio 114 vss vx 4528000 -3420000 must be bonded to vss 115 p02.0 mp+ / pu1 / vext 4528000 -3280000 gpio 116 p02.14 lp / pu1 / vext 4419500 -3200000 gpio 117 p02.1 lp / pu1 / vext 4528000 -3140000 gpio 118 p02.15 mp+ / pu1 / vext 4419500 -3060000 gpio 119 vss vx 4528000 -2985000 must be bonded to vss 120 p02.2 mp+ / pu1 / vext 4419500 -2910000 gpio 121 p02.3 lp / pu1 / vext 4528000 -2830000 gpio 122 p02.4 mp+ / pu1 / vext 4419500 -2750000 gpio 123 p02.9 lp / pu1 / vext 4528000 -2670000 gpio 124 p02.5 mp+ / pu1 / vext 4419500 -2590000 gpio 125 p02.10 lp / pu1 / vext 4528000 -2510000 gpio 126 p02.6 mp / pu1 / vext 4419500 -2440000 gpio 127 vext vx 4528000 -2375000 mu st be bonded to vext table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-297 v 1.1 2015-05 128 p02.7 mp / pu1 / vext 4419500 -2310000 gpio 129 p02.11 lp / pu1 / vext 4528000 -2240000 gpio 130 p02.8 lp / pu1 / vext 4419500 -2180000 gpio 131 vdd vx 4528000 -2095000 must be bonded to vdd 132 vss vx 4528000 -1995000 must be bonded to vss 133 p01.0 lp / pu1 / vext 4419500 -1937500 gpio 134 vss vx 4528000 -1910000 must be bonded to vss (double pad / center of elephant pad opening) 135 vdd vx 4528000 -1780000 must be bonded to vdd 136 p01.2 lp / pu1 / vext 4419500 -1715000 gpio 137 vss vx 4528000 -1660000 must be bonded to vss 138 p01.1 lp / pu1 / vext 4419500 -1605000 gpio 139 p01.3 lp / pu1 / vext 4528000 -1545000 gpio 140 p01.8 lp / pu1 / vext 4419500 -1485000 gpio 141 p01.4 lp / pu1 / vext 4528000 -1425000 gpio 142 p01.9 lp / pu1 / vext 4419500 -1365000 gpio 143 p01.5 lp / pu1 / vext 4528000 -1305000 gpio 144 p01.10 lp / pu1 / vext 4419500 -1245000 gpio 145 vext vx 4528000 -1190000 mu st be bonded to vext 146 p01.11 lp / pu1 / vext 4419500 -1135000 gpio 147 p01.6 mp / pu1 / vext 4528000 -1065000 gpio 148 p01.12 mp+ / pu1 / vext 4419500 -975000 gpio 149 p01.7 mp / pu1 / vext 4528000 -885000 gpio 150 vdd vx 4528000 -785000 must be bonded to vdd 151 vss vx 4528000 -685000 must be bonded to vss 152 p01.13 mp+ / pu1 / vext 4419500 -610000 gpio 153 vss vx 4528000 -535000 must be bonded to vss 154 p01.14 mp+ / pu1 / vext 4419500 -460000 gpio 155 reserved vx 4528000 -385000 must be bonded to vss 156 p01.15 lp / pu1 / vext 4419500 -330000 gpio 157 vext vx 4528000 -265000 m ust be bonded to vext 158 p00.13 mp+ / pu1 / vext 4419500 -190000 gpio 159 p00.0 mp / pu1 / vext 4528000 -100000 gpio 160 p00.14 lp / pu1 / vext 4419500 -30000 gpio 161 vss vx 4528000 25000 must be bonded to vss table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-298 v 1.1 2015-05 162 p00.15 mp+ / pu1 / vext 4419500 100000 gpio 163 p00.1 (vadc7.5 / ds5na) d 4419500 250000 analog input 164 p00.2 (vadc7.4 / ds5pa) d 4528000 310000 analog input 165 p00.3 (vadc7.3) d 4419500 370000 analog input 166 vss vx 4528000 425000 must be bonded to vss 167 p00.4 (vadc7.2) d 4419500 480000 analog input 168 p00.5 (vadc7.1) d 4528000 540000 analog input 169 p00.6 (vadc7.0) d 4419500 600000 analog input 170 vext vx 4528000 655000 must be bonded to vext 171 p00.7 (vadc6.5 / ds4na) d 4419500 710000 analog input 172 p00.8 (vadc6.4 / ds4pa) d 4528000 770000 analog input 173 p00.9 (vadc6.3) d 4419500 830000 analog input 174 p00.10 (vadc6.2) d 4528000 890000 analog input 175 p00.11 (vadc6.1) d 4419500 950000 analog input 176 vss vx 4528000 1005000 must be bonded to vss 177 p00.12 (vadc6.0) d 4419500 1060000 analog input 178 vdd vx 4528000 1115000 must be bonded to vdd 179 vss vx 4528000 1215000 must be bonded to vss 180 vext vx 4419500 1265000 must be bonded to vext 181 vss vx 4528000 1315000 must be bonded to vss 182 vdd vx 4528000 1415000 must be bonded to vdd 183 varef4 vx 4528000 1535000 positive analog reference voltage 4 184 vagnd4 vx 4419500 1585000 negative analog reference voltage 4 185 vddm vx 4528000 1635000 must be bonded to vext 186 an47 (vadc5.7 / ds3nd) s 4419500 1685000 analog input 187 an46 (vadc5.6 / ds3pd) s 4528000 1735000 analog input 188 an45 (vadc5.5 / ds3nc) s 4419500 1785000 analog input table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-299 v 1.1 2015-05 189 an44 (vadc5.4 / ds3pc) s 4528000 1835000 analog input 190 an43 (vadc5.3) d 4419500 1885000 analog input (with pull down diagnostics) 191 an42 (vadc5.2) d 4528000 1935000 analog input 192 an41 (vadc5.1) d 4419500 1985000 analog input 193 an40 (vadc5.0) d 4528000 2035000 analog input 194 an38 (vadc4.6 / ds3pb), p40.8 (sent8a) s 4528000 2135000 analog input, gpi (sent) 195 an39 (vadc4.7 / ds3nb), p40.9 (sent9a) s 4419500 2085000 analog input, gpi (sent) 196 an36 (vadc4.4 / ds3pa), p40.6 (sent6a) s 4528000 2235000 analog input, gpi (sent) 197 an37 (vadc4.5 / ds3na), p40.7 (sent7a) s 4419500 2185000 analog input, gpi (sent) 198 an34 (vadc4.2) d 4528000 2335000 analog input 199 an35 (vadc4.3) d 4419500 2285000 analog input (with pull down diagnostics) 200 an32 (vadc4.0), p40.4 (sent4a) s 4528000 2435000 analog input, gpi (sent) 201 an33 (vadc4.1), p40.5 (sent5a) s 4419500 2385000 analog input, gpi (sent) 202 an70 (vadc10.6 / ds9pa), p40.13 (sent13a) s 4528000 2535000 analog input, gpi (sent) 203 an71 (vadc10.7 / ds9na), p40.14 (sent14a) s 4419500 2485000 analog input, gpi (sent) 204 an68 (vadc10.4 / ds8pa), p40.11 (sent11a) s 4528000 2635000 analog input, gpi (sent) 205 an69 (vadc10.5 / ds8na), p40.12 (sent12a) s 4419500 2585000 analog input, gpi (sent) table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-300 v 1.1 2015-05 206 vddm vx 4528000 2735000 must be bonded to vext 207 an67 (vadc10.3 / ds8nb), p40.10 (sent10a) s 4419500 2685000 analog input, gpi (sent) 208 vssm vx 4528000 2835000 mu st be bonded to vss 209 vss vx 4419500 2785000 must be bonded to vss 210 an65 (vadc10.1) d 4528000 2935000 analog input 211 an66 (vadc10.2 / ds8pb d 4419500 2885000 analog input 212 an63 (vadc9.7 / ds7nb) d 4528000 3035000 analog input 213 an64 (vadc10.0) d 4419500 2985000 analog input 214 an61 (vadc9.5 / ds7na) d 4528000 3135000 analog input 215 an62 (vadc9.6 / ds7pb) d 4419500 3085000 analog input 216 an59 (vadc9.3) d 4528000 3235000 analog input 217 an60 (vadc9.4 / ds7pa) d 4419500 3185000 analog input 218 an57 (vadc9.1) d 4528000 3335000 analog input 219 an58 (vadc9.2) d 4419500 3285000 analog input 220 varef3 vx 4528000 3435000 positive analog reference voltage 3 221 an56 (vadc9.0) d 4419500 3385000 analog input 222 vagnd3 vx 4528000 3535000 negative analog reference voltage 3 223 varef2 vx 4419500 3485000 positive analog reference voltage 2 224 an55 (vadc8.7 / ds6nb) d 4528000 3635000 analog input 225 vagnd2 vx 4419500 3585000 negative analog reference voltage 2 226 an53 (vadc8.5 / ds6na) d 4528000 3735000 analog input 227 an54 (vadc8.6 / ds6pb) d 4419500 3685000 analog input 228 an51 (vadc8.3) d 4528000 3835000 analog input table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-301 v 1.1 2015-05 229 an52 (vadc8.4 / ds6pa) d 4419500 3785000 analog input 230 an49 (vadc8.1) d 4528000 3960000 analog input 231 an50 (vadc8.2) d 4419500 3897400 analog input 232 vddm vx 4528000 4085000 must be bonded to vext 233 an48 (vadc8.0) d 4419500 4022600 analog input 234 an31 (vadc3.7) d 4278000 4186500 analog input 235 vssm vx 4328000 4295000 mu st be bonded to vss 236 an29 (vadc3.5) d 4178000 4186500 analog input 237 an30 (vadc3.6) d 4228000 4295000 analog input 238 an27 (vadc3.3), p40.3 (sent3a) s 4078000 4186500 analog input (with pull down diagnostics), gpi (sent) 239 an28 (vadc3.4) d 4128000 4295000 analog input 240 an25 (vadc3.1 / ds2nb), p40.2 (sent1a) s 3978000 4186500 analog input, gpi (sent) 241 an26 (vadc3.2), p40.2 (sent2a) s 4028000 4295000 analog input, gpi (sent) 242 an23 (vadc2.7) d 3878000 4186500 analog input 243 an24 (vadc3.0 / ds2pb), p40.0 (sent0a) s 3928000 4295000 analog input, gpi (sent) 244 an21 (vadc2.5 / ds2na) d 3778000 4186500 analog input 245 an22 (vadc2.6) d 3828000 4295000 analog input 246 an19 (vadc2.3) d 3678000 4186500 analog input (with pull down diagnostics) 247 an20 (vadc2.4 / ds2pa) d 3728000 4295000 analog input 248 an17 (vadc2.1) d 3578000 4186500 analog input 249 an18 (vadc2.2) d 3628000 4295000 analog input 250 an15 (vadc1.7) d 3478000 4186500 analog input 251 an16 (vadc2.0) d 3528000 4295000 analog input 252 vagnd0 vx 3378000 4186500 negative analog reference voltage 0 253 vagnd1 vx 3428000 4295000 negative analog reference voltage 1 254 varef0 vx 3278000 4186500 positive analog reference voltage 0 table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-302 v 1.1 2015-05 255 varef1 vx 3328000 4295000 positive analog reference voltage 1 256 vss vx 3178000 4186500 must be bonded to vss 257 vssm vx 3228000 4295000 mu st be bonded to vss 258 an14 (vadc1.6) d 3078000 4186500 analog input 259 vddm vx 3128000 4295000 must be bonded to vext 260 an12 (vadc1.4) d 2978000 4186500 analog input 261 an13 (vadc1.5) d 3028000 4295000 analog input 262 an10 (vadc1.2) d 2878000 4186500 analog input 263 an11 (vadc1.3) d 2928000 4295000 analog input (with pull down diagnostics) 264 an8 (vadc1.0) d 2778000 4186500 analog input 265 an9 (vadc1.1) d 2828000 4295000 analog input 266 an6 (vadc0.6) d 2678000 4186500 analog input 267 an7 (vadc0.7) d 2728000 4295000 analog input (with pull down diagnostics) 268 an4 (vadc0.4) d 2578000 4186500 analog input 269 an5 (vadc0.5) d 2628000 4295000 analog input 270 an2 (vadc0.2 / ds0pa) d 2478000 4186500 analog input 271 an3 (vadc0.3 / ds0na) d 2528000 4295000 analog input 272 an1 (vadc0.1 / ds1na) d 2378000 4186500 analog input 273 vssm vx 2428000 4295000 mu st be bonded to vss 274 an0 (vadc0.0 / ds1pa) d 2278000 4186500 analog input 275 vddm vx 2328000 4295000 must be bonded to vext 276 evr_off vx 2158000 4295000 must be bonded to vss 277 p33.0 lp / pu1 / vext 2103000 4186500 gpio 278 vss vx 2048000 4295000 must be bonded to vss 279 p33.1 lp / pu1 / vext 1993000 4186500 gpio 280 p34.1 lp / pu1 / vext 1933000 4295000 gpio 281 p33.2 lp / pu1 / vext 1873000 4186500 gpio 282 vss vx 1778000 4295000 must be bonded to vss 283 vdd vx 1678000 4295000 must be bonded to vdd 284 p33.3 lp / pu1 / vext 1583000 4186500 gpio 285 vext vx 1509000 4295000 mu st be bonded to vext 286 vext vx 1440000 4186500 mu st be bonded to vext 287 p34.2 lp / pu1 / vext 1385000 4295000 gpio table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-303 v 1.1 2015-05 288 p33.4 lp / pu1 / vext 1325000 4186500 gpio 289 p34.3 lp / pu1 / vext 1265000 4295000 gpio 290 p33.5 lp / pu1 / vext 1205000 4186500 gpio 291 p34.4 lp / pu1 / vext 1145000 4295000 gpio 292 p33.6 lp / pu1 / vext 1085000 4186500 gpio 293 p34.5 lp / pu1 / vext 1015000 4295000 gpio 294 p33.7 lp / pu1 / vext 955000 4186500 gpio 295 p33.8 mp / highz / vext 885000 4295000 gpio 296 p33.9 lp / pu1 / vext 815000 4186500 gpio 297 vss vx 760000 4295000 must be bonded to vss 298 p33.10 mp / pu1 / vext 695000 4186500 gpio 299 p33.14 lp / pu1 / vext 625000 4295000 gpio 300 p33.11 mp / pu1 / vext 555000 4186500 gpio 301 p33.15 lp / pu1 / vext 485000 4295000 gpio 302 p33.12 mp / pu1 / vext 415000 4186500 gpio 303 p32.5 lp / pu1 / vext 345000 4295000 gpio 304 p33.13 mp / pu1 / vext 275000 4186500 gpio 305 p32.6 lp / pu1 / vext 205000 4295000 gpio 306 vgate3p (ldo) vgate3p 150000 4186500 must be bonded to vss 307 vext vx 96000 4295000 must be bonded to vext 308 p32.0 lp / evr13 smps -> pd, gpio -> pu1 / vext 37000 4186500 gpio 309 vgate1n (smps) vgate1n -18000 4295000 must be bonded to vss if evr13 smps is not used. must be bonded to nmos gate if evr13 smps is used. 310 vgate1p (smps) vgate1p -68000 4186500 must be bonded to vext if evr13 smps is not used. must be bonded to pmos gate if evr13 smps is used. 311 vgate1p (ldo) vgate1p -118000 4295000 vgate1p (ldo) 312 p32.2 lp / pu1 / vext -173000 4186500 gpio 313 vss vx -268000 4295000 must be bonded to vss 314 vdd vx -368000 4295000 must be bonded to vdd 315 p32.3 lp / pu1 / vext -463000 4186500 gpio 316 p32.7 lp / pu1 / vext -523000 4295000 gpio table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-304 v 1.1 2015-05 317 p32.4 mp+ / pu1 / vext -603000 4186500 gpio 318 vss vx -678000 4295000 must be bonded to vss 319 p31.0 mp / pu1 / vflexe -823000 4295000 gpio 320 p31.1 mp / pu1 / vflexe -903000 4186500 gpio 321 p31.2 mp / pu1 / vflexe -983000 4295000 gpio 322 p31.3 mp / pu1 / vflexe -1063000 4186500 gpio 323 vss vx -1128000 4295000 must be bonded to vss 324 p31.4 mp / pu1 / vflexe -1193000 4186500 gpio 325 p31.5 mp / pu1 / vflexe -1273000 4295000 gpio 326 p31.6 mp / pu1 / vflexe -1353000 4186500 gpio 327 p31.7 mp / pu1 / vflexe -1433000 4295000 gpio 328 p31.8 mp / pu1 / vflexe -1513000 4186500 gpio 329 vflexe vx -1578000 4295000 must be bonded to vext or vddp3 330 p31.9 mp / pu1 / vflexe -1643000 4186500 gpio 331 p31.10 mp / pu1 / vflexe -1723000 4295000 gpio 332 p31.14 mp / pu1 / vflexe -1803000 4186500 gpio 333 p31.15 mp / pu1 / vflexe -1883000 4295000 gpio 334 p31.11 mp / pu1 / vflexe -1963000 4186500 gpio 335 vss vx -2068000 4295000 must be bonded to vss 336 vdd vx -2168000 4295000 must be bonded to vdd 337 p31.12 mp / pu1 / vflexe -2273000 4186500 gpio 338 vss vx -2338000 4295000 must be bonded to vss 339 p31.13 mp / pu1 / vflexe -2403000 4186500 gpio table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-305 v 1.1 2015-05 340 p30.0 mp / pu1 / vflexe -2483000 4295000 gpio 341 p30.1 mp / pu1 / vflexe -2563000 4186500 gpio 342 p30.2 mp / pu1 / vflexe -2643000 4295000 gpio 343 vflexe vx -2788000 4295000 must be bonded to vext or vddp3 344 p30.3 mp / pu1 / vflexe -2723000 4186500 gpio 345 vss vx -2918000 4295000 must be bonded to vss 346 p30.4 mp / pu1 / vflexe -2853000 4186500 gpio 347 p30.5 mp / pu1 / vflexe -2983000 4186500 gpio 348 p30.6 mp / pu1 / vflexe -3063000 4295000 gpio 349 p30.8 mp / pu1 / vflexe -3223000 4295000 gpio 350 p30.7 mp / pu1 / vflexe -3143000 4186500 gpio 351 vflexe vx -3368000 4295000 must be bonded to vext or vddp3 352 p30.9 mp / pu1 / vflexe -3303000 4186500 gpio 353 p30.11 mp / pu1 / vflexe -3513000 4295000 gpio 354 p30.10 mp / pu1 / vflexe -3433000 4186500 gpio 355 p30.15 mp / pu1 / vflexe -3673000 4295000 gpio 356 p30.12 mp / pu1 / vflexe -3593000 4186500 gpio 357 vss vx -3818000 4295000 must be bonded to vss 358 p30.13 mp / pu1 / vflexe -3753000 4186500 gpio 359 p26.0 lp / pu1 / vflexe -3953000 4295000 gpio 360 p30.14 mp / pu1 / vflexe -3883000 4186500 gpio 361 vss vx -4098000 4295000 must be bonded to vss (double pad / center of elephant pad opening) table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-306 v 1.1 2015-05 362 p25.0 a2 / pu1 / vebu -4078000 4186500 gpio 363 p25.2 a2 / pu1 / vebu -4228000 4295000 gpio 364 p25.1 a2 / pu1 / vebu -4178000 4186500 gpio 365 p25.4 a2 / pu1 / vebu -4338000 4295000 gpio 366 p25.3 a2 / pu1 / vebu -4288000 4186500 gpio 367 p25.5 a2 / pu1 / vebu -4419500 4105000 gpio 368 p25.7 a2 / pu1 / vebu -4419500 4005000 gpio 369 vebu vx -4528000 4055000 must be bonded to vext or vddp3 370 p25.8 a2 / pu1 / vebu -4419500 3905000 gpio 371 vss vx -4528000 3955000 must be bonded to vss 372 p25.10 a2 / pu1 / vebu -4419500 3805000 gpio 373 p25.9 a2 / pu1 / vebu -4528000 3855000 gpio 374 vss vx -4528000 3755000 must be bonded to vss 375 p25.11 a2 / pu1 / vebu -4419500 3605000 gpio 376 vdd vx -4528000 3655000 must be bonded to vdd 377 p25.13 a2 / pu1 / vebu -4419500 3505000 gpio 378 p25.12 a2 / pu1 / vebu -4528000 3555000 gpio 379 p25.14 a2 / pu1 / vebu -4419500 3405000 gpio 380 vebu vx -4528000 3455000 must be bonded to vext or vddp3 381 p25.6 a2 / pu1 / vebu -4419500 3305000 gpio 382 p25.15 a2 / pu1 / vebu -4528000 3355000 gpio 383 p24.1 a2 / pu1 / vebu -4419500 3205000 gpio 384 p24.0 a2 / pu1 / vebu -4528000 3255000 gpio 385 p24.2 a2 / pu1 / vebu -4419500 3105000 gpio 386 vss vx -4528000 3155000 must be bonded to vss 387 p24.4 a2 / pu1 / vebu -4419500 3005000 gpio 388 p24.3 a2 / pu1 / vebu -4528000 3055000 gpio 389 p24.6 a2 / pu1 / vebu -4419500 2905000 gpio 390 p24.5 a2 / pu1 / vebu -4528000 2955000 gpio 391 vss vx -4528000 2845000 must be bonded to vss 392 p24.7 a2 / pu1 / vebu -4419500 2685000 gpio 393 vdd vx -4528000 2745000 must be bonded to vdd 394 p24.8 a2 / pu1 / vebu -4419500 2585000 gpio 395 vebu vx -4528000 2635000 must be bonded to vext or vddp3 396 p24.10 a2 / pu1 / vebu -4419500 2485000 gpio 397 p24.9 a2 / pu1 / vebu -4528000 2535000 gpio table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-307 v 1.1 2015-05 398 p24.12 a2 / pu1 / vebu -4419500 2385000 gpio 399 p24.11 a2 / pu1 / vebu -4528000 2435000 gpio 400 p24.13 a2 / pu1 / vebu -4419500 2285000 gpio 401 vss vx -4528000 2335000 must be bonded to vss 402 p24.15 a2 / pu1 / vebu -4419500 2185000 gpio 403 p24.14 a2 / pu1 / vebu -4528000 2235000 gpio 404 p23.5 mp+ / pu1 / vext -4419500 2040000 gpio 405 vss vx -4528000 1965000 must be bonded to vss 406 p23.0 lp / pu1 / vext -4419500 1910000 gpio 407 vext vx -4528000 1855000 mu st be bonded to vext 408 p23.1 mp+ / pu1 / vext -4419500 1780000 gpio 409 vdd vx -4528000 1695000 must be bonded to vdd 410 vss vx -4528000 1595000 must be bonded to vss 411 p23.2 lp / pu1 / vext -4419500 1510000 gpio 412 p23.6 lp / pu1 / vext -4528000 1450000 gpio 413 p23.3 lp / pu1 / vext -4419500 1390000 gpio 414 p23.7 lp / pu1 / vext -4528000 1330000 gpio 415 p23.4 mp+ / pu1 / vext -4419500 1250000 gpio 416 vss vx -4528000 1175000 must be bonded to vss 417 p22.0 lvdsm_n / pu1 / vext -4419500 1100000 gpio 418 p22.1 lvdsm_p / pu1 / vext -4419500 770000 gpio 419 vss vx -4528000 688000 must be bonded to vss 420 vdd vx -4528000 588000 must be bonded to vdd 421 p22.2 lvdsm_n / pu1 / vext -4419500 513000 gpio 422 p22.3 lvdsm_p / pu1 / vext -4419500 183000 gpio 423 vext vx -4528000 108000 mu st be bonded to vext 424 p22.4 lp / pu1 / vext -4419500 53000 gpio 425 vss vx -4528000 -2000 must be bonded to vss 426 vdd vx -4528000 -102000 must be bonded to vdd 427 p22.5 lp / pu1 / vext -4419500 -157000 gpio 428 p22.7 lp / pu1 / vext -4528000 -217000 gpio 429 p22.6 lp / pu1 / vext -4419500 -277000 gpio 430 vss vx -4528000 -332000 must be bonded to vss table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-308 v 1.1 2015-05 431 p22.8 lp / pu1 / vext -4419500 -387000 gpio 432 p22.9 lp / pu1 / vext -4528000 -447000 gpio 433 p22.10 lp / pu1 / vext -4419500 -507000 gpio 434 p22.11 lp / pu1 / vext -4528000 -567000 gpio 435 vddosc vx -4528000 -702000 must be bonded to vss 436 vssosc vx -4528000 -80200 0 must be bonded to vss 437 xtal1 xtal1 -4419500 -90950 0 main oscillator/pll/clock generator inpu t. must be bonded to external quartz or resonator. 438 xtal2 xtal2 -4419500 -10095 00 main oscillator/pll/clock generator inpu t. must be bonded to external quartz or resonator. 439 vssosc vx -4528000 -1117000 must be bonded to vss 440 vddosc3 vx -4419500 -1167000 must be bonded to vddp3 441 vddp3 vx -4528000 -1257000 must be bonded to vddp3 442 p21.0 lvdsh_n / pu1 / vddp3 -4419500 -1362500 gpio 443 p21.1 lvdsh_p / pu1 / vddp3 -4419500 -1462500 gpio 444 vssp vx -4528000 -1525000 must be bonded to vss 445 p21.2 lvdsh_n / pu1 / vddp3 -4419500 -1587500 gpio 446 p21.3 lvdsh_p / pu1 / vddp3 -4419500 -1687500 gpio 447 vddp3 vx -4528000 -1750000 must be bonded to vddp3 448 p21.4 lvdsh_n / pu1 / vddp3 -4419500 -1824500 gpio 449 vss vx -4528000 -2020000 must be bonded to vss (double pad / center of elephant pad opening) 450 p21.5 lvdsh_p / pu1 / vddp3 -4419500 -1975500 gpio 451 vdd vx -4528000 -2150000 must be bonded to vdd 452 vssp vx -4528000 -2260000 must be bonded to vss 453 p21.6 a2 / pu / vddp3 -4419500 -2210000 gpio, tdi 454 vddp3 vx -4528000 -2360000 must be bonded to vddp3 455 tms /dap1 a2 / pd / vddp3 -4419500 -2310000 jtag module state machine control input / device access port line 1 table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-309 v 1.1 2015-05 legend: column ? number ?: running number of pads in the pad frame 456 tck /dap0 a2 / pd / vddp3 -4528000 -2460000 jtag module clock input / device access port line 0 457 p21.7 a2 / pu / vddp3 -4419500 -2410000 gpio, tdo 458 trst (n) a2 / pd / vddp3 -4419500 -2520000 jtag module reset/enable input 459 reserved vx -4528000 -2650000 must be bonded to vss 460 vext vx -4528000 -2780000 must be bonded to vext 461 p20.0 mp / pu1 / vext -4419500 -2715000 gpio 462 vss vx -4528000 -2890000 must be bonded to vss 463 p20.1 lp / pu1 / vext -4419500 -2835000 gpio 464 porst (n) porst / pd / vext -4528000 -3007500 power on reset input. additional strong pd in case of power fail. 465 p20.2 lp / pu / vext -4419500 - 2940000 testmode pin must be bonded 466 esr1 (n) /evrwup mp / pu1 / vext -4528000 -31500 00 external system request reset 1. default nmi function. evr wakeup pin. 467 p20.3 lp / pu1 / vext -4419500 -3080000 gpio 468 esr0 (n) /evrwup mp / od -4528000 -3290000 external system request reset 0. default configuration during and after reset is open-drain driver. the driver drives low during power-on reset. evr wakeup pin. 469 p20.7 lp / pu1 / vext -4419500 -3220000 gpio 470 vext vx -4528000 -3435000 must be bonded to vext 471 p20.8 mp / pu1 / vext -4419500 -3370000 gpio 472 p20.6 lp / pu1 / vext -4528000 -3590000 gpio 473 p20.10 mp / pu1 / vext -4419500 -3520000 gpio 474 p20.9 lp / pu1 / vext -4528000 -3750000 gpio 475 p20.11 mp / pu1 / vext -4419500 -3680000 gpio 476 vss vx -4528000 -3905000 must be bonded to vss 477 p20.12 mp / pu1 / vext -4419500 -3820000 gpio 478 p20.14 mp / pu1 / vext -4528000 -4080000 gpio 479 p20.13 mp / pu1 / vext -4419500 -3990000 gpio 480 p15.0 lp / pu1 / vext -4263000 -4186500 gpio table 2-74 tc29x bare die pad list (cont?d) number pad name pad type x y comment tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-310 v 1.1 2015-05 column ? name ?: symbolic name of the pad. the functions mapped on gpio pads ?p x.y? are described in the user?s ma nual chapter ?general purpose i/o ports and peripheral i/o lines (ports)? column ? type ?: lp = pad class lp (5v/3.3v, class lp parameters for digital input / output and class d parameters for analog input function) mp = pad class mp (5v/3.3v) mp+ = pad class mp+ (5v/3.3v) mpr = pad class mpr (5v/3.3v) a2 = pad class a2 (3.3v) lvdsm = pad class lvdsm (5v/3.3v) lvdsh = pad class lvdsh (3.3v) s = pad class s (class s parameters for digital input and class d parameters for analog input function) d = pad class d (vadc / dsadc) pu = with pull-up device connected during reset (porst = 0) pu1 = with pull-up device connected during reset (porst = 0) 1) 2) 3) pd = with pull-down device connected during reset (porst = 0) pd1 = with pull-down device connected during reset (porst = 0) 1) 2) 3) px = behavior depends on usage: pd in evr13 smps mode and pu1 in gpio mode od = open drain during reset (porst = 0) highz = tri-state during reset (porst = 0) porst = porst input pad xtal1 = xtal1 input pad xtal2 = xtal2 input pad vgate1p = vgate1p vgate3p = vgate3p vx = supply nc = these pins are reserved for future extensions and shall not be connected externally nc1 = these pins are not connecte d on package level and will not be used for future extensions ncvddpsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. ncvddsb = this pin has a different functionality in an production device and an emulation device. for details pls. see pin/ball description of this pin. column ? x ? / ? y ?: pad opening center coordinates 2.4.1 pad openings two different pad openings are used: 1) the default state of gpios (p x.y) during and after porst active is contro llled via hwcfg[6] (p14.4). hwcfg[6] has a weak internal pull-up active at start-up if the pin is le ft unconnected.see also users manual, ?introduction chapter?, ?general purpose i/o ports and peripheral i/o lines?, figur e: ?default state of port pins during and after reset?. 2) if hwcfg[6] is left unconnected or is externally pulled high, weak internal pull-ups are active at gpios (px.y) pins during and after reset. exceptions are p33.8 (hig hz), p40.x (default configurat ion during and after reset: analog inputs, port input funtion disabled), esr0, p21.6 / p21.7 (port pins overlayed with jtag functionality). 3) if hwcfg[6] is connected to ground, port pins are predom inantly in highz during and after reset. exceptions are p33.8 (highz), p40.x (default configur ation during and after reset: analog inputs, port input funtion disabled), esr0, p21.6 / p21.7 (port pins overlayed wit h jtag functionality). tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-311 v 1.1 2015-05 ? standard pad opening is 70um x 75um where 70um is th e width of the opening (width as seen from the die side) and 75um is the depth of the opening (from the die side into the silicon). ? double pad or elephant pad opening is 130um x 75um where 130um is the width of the opening (width as seen from the die side) and 75um is the dept h of the opening (from the die side in to the silicon). double pads are used only for supply and can be identified by th e words double pad or elephant pad in the comment column. 2.4.2 emergency stop function the emergency stop function can be used to force gpios (g eneral purpose inputs/outputs) via an external input signal (emgstopa or emgstopb) into a defined state: ? input state and ? pu or highz depending on hwcfg[6] level latched during porst active control of the emergency stop function: ? the emergency stop function can be enabled/disable d in the scu (see chapter ?scu?, ?emergency stop control?) ? the emergency stop input signal, emgstopa (p33.8) / emgsto pb (p21.2) , can selected in the scu (see chapter ?scu?, ?emergency stop control?) ? on port level, each gpio can be enabled/disabled fo r the emergency stop function via the px_esr (port x emergency stop) registers in the port control logic (s ee chapter ?general purpose i/o ports and peripheral i/o lines?, ?emergency stop register?). the emergency stop function is available for all gpio ports with th e following exceptions: ? not available for p20.2 (general purpose input/gpi only, overlayed with testmode) ? not available for p40.x (analoge input anx overlayed with gpi) ? not available for p32.0 evr13 smps mode. ? not available for dedicated i/o without general purpose output function (e.g esrx, tms, tck) the emergency stop function can be ov erruled on the following gpio ports: ? p00.x and p02.x: emergency stop can be overruled by the 8-bit standby controller (sbr), if implemented. overruling can be disabled via the control registers p00_scr / p02_scr (see chapter ?general purpose i/o ports and peripheral i/o lines?, p00 / p01) ? p00.x: emergency stop can be overruled by the vadc. overruling can be disabled via the control register p00_scr (see chapter ?general purpose i/ o ports and peripheral i/o lines?, p00) ? p14.0 and p14.1: emergency stop can be overruled in the dxcpl mode (dap over can physical layer mode). no overruling in the dxcm (debug over can message) mode ? p21.6: emergency stop can be overruled in jtag mode if this pin is used as tdi ? p21.7: emergency stop can be overruled in jtag or three pin dap mode ? p20.0: emergency stop can be overruled in jt ag mode if this gpio is used as tdi ? p33.8: emergency stop can be overruled if this pin is used as safety output pin (smufsp) 2.4.3 pull-up/pull-down r eset behavior of the pins tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step package and pinning definitionst c29x bare die pad definition data sheet 2-312 v 1.1 2015-05 in case of leakage test (porst = 0 and testmode = 0), the pull-down of the trst pin is switched off. in case of an user application (testmode = 1), the pull-down of the trst is always switched on. table 2-75 list of pull-up/pull-down reset behavior of the pins pins porst = 0 porst = 1 all gpios pull-up if hwcfg[6] = 1 or high-z if hwcfg[6] = 0 tdi , testmode pull-up porst 1) 1) pull-down with i porst relevant is always activated when a pr imary supply monitor detects a violation. pull-down with i porst relevant pull-down with i pdli relevant trst , tck, tms pull-down esr0 the open-drain driver is used to drive low. 2) 2) valid additionally after deactivation of porst until the inter nal reset phase has finished. see the scu chapter for details. pull-up 3) 3) see the scu_iocr register description. esr1 pull-up 3) tdo pull-up high-z/pull-up 4) 4) depends on jtag/dap selection with trst . tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationparameter interpretation data sheet 3-313 v 1.1 2015-05 3 electrical specification 3.1 parameter interpretation the parameters listed in this section partly represen t the characteristics of the tc290 / TC297 / tc298 / tc299 and partly its requirements on the system . to aid interpreting the parameters easily when evaluating them for a design, they are marked with an two-le tter abbreviation in column ?symbol?: ? cc such parameters indicate c ontroller c haracteristics which are a distinctive feature of the tc290 / TC297 / tc298 / tc299 and must be regarded for a system design. ? sr such parameters indicate s ystem r equirements which must provided by the microcontroller system in which the tc290 / TC297 / tc298 / tc299 designed in. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationa bsolute maximum ratings data sheet 3-314 v 1.1 2015-05 3.2 absolute maximum ratings stresses above the values listed under ?absolute maximu m ratings? may cause permanent damage to the device. this is a stress rating only and functi onal operation of the device at thes e or any other conditions above those indicated in the operational conditions of this specification is not implied. exposure to absolute maximum rating conditions may affect device reliability. table 3-1 absolute maximum ratings parameter symbol values unit note / test condition min. typ. max. storage temperature t st sr -65 - 170 c upto 65h @ t j = 150c; upto 15h @ t j = 170c voltage at v dd power supply pins with respect to v ss 1) 1) valid for cumulated for up to 2.8h and pulse forms following a power supply switch on phase, where the rise and fall times are releated to the system capacities and coils. v dd sr - - 1.9 v voltage at v ddp3 and v ddfl3 power supply pins with respect to v ss 1) v ddp3 sr - - 4.43 v voltage at v ddm , v ext and v flex power supply pins with respect to v ss 1) v ddm sr - - 7.0 v voltage on any class a2 and lvdsh input pin with respect to v ss 1)2) 2) voltages below v inmin have no impact to the device reliabiltiy as long as the times and currents defined in section pin reliability in overload for the af fected pad(s) are not violated. v in sr -0.5 - min( v ddp3 + 0.6 , 4.23 ) v whatever is lower voltage on all other input pins with respect to v ss 1)2) v in sr -0.5 - 7.0 v input current on any pin during overload condition 3) 3) this parameter is an absolute maximum rating. exposure to absolute maximum ratings for extended periods of time may damage the device. i in sr -10 - 10 ma absolute maximum sum of all input circuit currents during overload condition 3) i in sr -100 - 100 ma tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpin reliability in overload data sheet 3-315 v 1.1 2015-05 3.3 pin reliability in overload when receiving signals from higher voltage devices, low-voltage devices experience overload currents and voltages that go beyond their own io power supplies specification. the following table defines overload co nditions that will not cause any negativ e reliability impact if all the following conditions are met: ? full operation life-time (24500 h) is not exceeded ? operating conditions are met for ? pad supply levels ? temperature if a pin current is out of the operating conditions but within the overload parameters, then the parameters functionality of this pin as stated in the operating conditions can no longer be guaranteed. operation is still possible in most cases bu t with relaxed parameters. note: an overload condition on one or more pins does not require a reset. table 3-2 overload parameters parameter symbol values unit note / test condition min. typ. max. input current on any digital pin during overload condition i in -5 - 5 ma except lvds pins -15 1) -15 1) ma except lvds pins; limited to max. 20 pulses with 1ms pulse length input current on lvds pin during overload condition i inlvds -3 - 3 ma absolute maximum sum of all input circuit currents during overload condition i ing -50 - 50 ma input current on analog input pin during overload condition i inana -3 - 3 ma -5 - 5 ma limited to 60h over lifetime absolute sum of all adc inputs during overload condition i insca -20 - 20 ma absolute maximum sum of all input circuit currents during overload condition i ins -100 - 100 ma signal voltage over/undershoot at gpios v ous v ss - 2 - v ext/flex + 2 v limited to 60h over lifetime; valid for lp, mp, mp+, and mpr pads inactive device pin current during overload condtion 2) i id -1 - 1 ma all power supply voltages v ddx = 0 sum of all inactive device pin currents 2) i ids -100 - 100 ma tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpin reliability in overload data sheet 3-316 v 1.1 2015-05 overload coupling factor for digital inputs, negative 3) k ovdn cc - - 4*10 -3 overload injected on gpio non lvds pad and affecting neighbor a2 pads of p24.x and p25.x; -2ma < i in < 0ma -2*10 -4 - overload injected on gpio non lvds pad and affecting neighbor lp and a2 (exept p24.x and p25.x) pads; -2ma < i in < 0ma --1*10 -2 overload injected on gpio non lvds pad and affecting neighbor lp and a2 pads (exept p25.2 and p25.4); - 5ma < i in < -2ma --6*10 -4 overload injected on gpio non lvds pad and affecting neighbor lp and a2 pads; -2ma < i in < 0ma - - 1.7*10 -3 overload injected on gpio non lvds pad and affecting neighbor mp, mp+, and mpr pads; -2ma < i in < 0ma --2*10 -2 overload injected on gpio non lvds pad and affecting neighbor mp, mp+, and mpr pads; -5ma < i in < - 2ma - - 1.5*10 -2 overload injected on gpio non lvds pad and affecting neighbor pads p25.2 and p25.4; -5ma < i in < -2ma - - 0.3 overload injected on lvds pad and affecting neighbor lvds pads - - 0.93 coupling between pads 21.0, 21.1,21.2 and 21.3 table 3-2 overload parameters (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpin reliability in overload data sheet 3-317 v 1.1 2015-05 note: dsadc input pins count as analog pins as they are overlaid with vadc pins. overload coupling factor for digital inputs, positive 3) k ovdp cc - - 1*10 -5 overload injected on gpio non lvds pad and affecting neighbor gpio non lvds pads - - 1.6*10 -4 overload injected on gpio pad and affecting neighbor p32.0 pad --1*10 -4 overload injected on gpio pad and affecting neighbor p32.4 and p33.12 pad --5*10 -4 overload injected on lvds pad and affecting neighbor lvds pads overload coupling factor for analog inputs, negative k ovan cc - - 6*10 -4 4) analog inputs overlaid with class lp pads or pull down diagnostics; -1ma < i in < 0ma --1*10 -2 analog inputs overlaid with class lp pads or pull down diagnostics; -5ma < i in < -1ma --1*10 -4 else; -5ma < i in < 0ma overload coupling factor for analog inputs, positive k ovap cc - - 1*10 -5 5ma < i in < 0ma 1) reduced vadc / dsadc result accuracy and / or gpio input levels ( v il and v ih ) can differ from specified parameters. 2) limitations for time and supply levels specified in this section are not valid for this parameter. 3) overload is measured as increase of pad leakage caused by injection on neighbor pad. 4) for analogue inputs overlaid with dsadc function the vcm holdbuffer shall be enabled, in case dsadcs are enabled. table 3-3 pn-junction characteristics for positive overload pad type i in =3ma i in =5ma f/a2 u in = v ddp3 +0.5v u in = v ddp3 +0.6v lp / mp / mp+ u in = v ext / flex +0.75v u in = v ext / flex +0.8v lvdsm u in = v ext +0.75v - lvdsh u in = v ddp3 +0.5v - d u in = v ddm +0.75v - table 3-2 overload parameters (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpin reliability in overload data sheet 3-318 v 1.1 2015-05 table 3-4 pn-junction characteristics for negative overload pad type i in =-3ma i in =-5ma f/a2 u in = v ss -0.5v u in = v ss -0.6v lp / mp / mp+ u in = v ss -0.75v u in = v ss -0.8v lvdsm u in = v ss -0.75v - lvdsh u in = v ss -0.5v - d u in = v ss -0.75v - tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificati onoperating conditions data sheet 3-319 v 1.1 2015-05 3.4 operating conditions the following operating c onditions must not be exceeded in order to ensure correct op eration and reliability of the tc290 / TC297 / tc298 / tc299. all parameters specifi ed in the following tables refer to these operating conditions, unless otherwise noticed. digital supply voltages applied to the tc290 / TC297 / tc298 / tc299 must be static regulated voltages. all parameters specified in the following tables refer to these oper ating conditions (see table below), unless otherwise noticed in the no te / test condition column. table 3-5 operating conditions parameter symbol values unit note / test condition min. typ. max. sri frequency f sri sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v max system frequency f max sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v cpu0 frequency f cpu0 sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v cpu1 frequency f cpu1 sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v cpu2 frequency f cpu2 sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v pll output frequency f pll sr 20 - 300 mhz pll_eray output frequency f plleray sr 20 - 400 mhz spb frequency f spb sr - - 90 mhz 1.17v < v dd < 1.43v - - 100 1) mhz 1.235v < v dd < 1.43v asclin fast frequency f asclinf sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v asclin slow frequency f asclins sr - - 90 mhz 1.17v < v dd < 1.43v - - 100 1) mhz 1.235v < v dd < 1.43v baud2 frequency f baud2 sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v baud1 frequency f baud1 sr - - 90 mhz 1.17v < v dd < 1.43v - - 100 1) mhz 1.235v < v dd < 1.43v fsi2 frequency f fsi2 sr - - 270 mhz 1.17v < v dd < 1.43v - - 300 1) mhz 1.235v < v dd < 1.43v fsi frequency f fsi sr - - 90 mhz 1.17v < v dd < 1.43v - - 100 1) mhz 1.235v < v dd < 1.43v gtm frequency f gtm sr - - 90 mhz 1.17v < v dd < 1.43v - - 100 1) mhz 1.235v < v dd < 1.43v ebu frequency f ebu sr - - 180 mhz 1.17v < v dd < 1.43v - - 200 mhz 1.235v < v dd < 1.43v tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificati onoperating conditions data sheet 3-320 v 1.1 2015-05 stm frequency f stm sr - - 90 mhz 1.17v < v dd < 1.43v - - 100 1) mhz 1.235v < v dd < 1.43v eray frequency f eray sr - - 80 mhz bbb frequency f bbb sr - - 150 mhz multican frequency f can sr - - 100 mhz absolute sum of short circuit currents of the device i sc_d sr - - 100 ma ambient temperature t a sr -40 - 125 c valid for all sak products -40 - 150 c valid for all sal products -40 - 170 c valid for all sal products without package junction temperature t j sr -40 - 150 c valid for all sak products -40 - 170 c valid for all sal products core supply voltage 2) v dd sr 1.17 1.3 1.43 3) v only required if externally supplied adc analog supply voltage v ddm sr 2.97 5.0 5.5 4) v digital external supply voltage for lp, mp, mp+ and lvdsm pads and evr 5) v ext sr 2.97 - 4.5 v 3.3v pad parameters are valid 4.5 5.0 5.5 4) v 5v pad parameters are valid digital supply voltage for flex port v flex sr 2.97 - 4.5 v 3.3v pad parameters are valid 4.5 5.0 5.5 4) v 5v pad parameters are valid digital supply voltage for lvdsh and a2 pads 6) v ddp3 sr 2.97 3.3 3.63 7) v 3.3v pad parameters are valid; only required if externally supplied flash supply voltage 3.3v 2) v ddfl3 sr 2.97 3.3 3.63 v only required if externally supplied digital ground voltage v ss sr 0 - - v analog ground voltage for v ddm v ssm cc -0.1 0 0.1 v voltage to ensure defined pad states 8) v ddppa cc 0.72 - - v a2 and lvdsh 1.4 - - v lp, mp, mp+, mpr and lvdsm table 3-5 operating conditions (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificati onoperating conditions data sheet 3-321 v 1.1 2015-05 digital supply voltage for ebu v ebu sr 2.97 3.3 3.63 v 3.3v pad parameters are valid; only required if externally supplied digital external supply voltage for evr and during standby mode v evrsb sr 2.97 - 5.5 v digital supply voltage for ebu flex port v flexe sr 2.97 3.3 4.5 v 3.3v pad parameters are valid 4.5 5.0 5.5 v 5v pad parameters are valid 1) v dd = 1.33v +- 7.5% ( with increased nominal v dd ) voltage by +2.5%. 2) no external inductive load permissible if evr is used. all v dd pins shall be connected together externally on the pcb. 3) voltage overshoot to 1.69v is permissi ble, provided the duration is less than 2h cumulated. reduced adc accuracy and leakage is increased. 4) voltage overshoot to 6.5v is permissi ble, provided the duration is less than 2h cumulated. reduced adc accuracy and leakage is increased. 5) all v ext pins shall be connected together externally on the pcb. 6) all v ddp3 pins shall be connected together externally on the pcb. 7) voltage overshoot to 4.29v is permissi ble, provided the duration is less than 2h cumulated. reduced adc accuracy and leakage is increased. 8) this parameter is valid under the assu mption the porst signal is constantly at low level dur ing the power-up/power-down of v ddp3 . table 3-5 operating conditions (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-322 v 1.1 2015-05 3.5 5 v / 3.3 v switchable pads pad classes lp, mp and mp+ support both automotive level (al) or ttl level (ttl) operation. parameters are defined for al operation and degrade in ttl operation. table 3-6 standard_pads parameter symbol values unit note / test condition min. typ. max. pin capacitance (digital inputs/outputs) c io cc - 6 10 pf spike filter always blocked pulse duration t sf1 cc - - 80 ns porst only spike filter pass-through pulse duration t sf2 cc 220 - - ns porst only porst pad output current 1) 1) pull-down with i porst relevant is always activated when a pr imary supply monitor detects a violation. i porst cc 11 - - ma v ext = 3.0v; v porst = 0.9v; t j = 165c 13 - - ma v ext = 4.5v; v porst = 1.0v table 3-7 class lp 5v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 75 mhz hysteresis active - - 150 mhz hysteresis inactive input hysteresis for lp pad 1) hyslp cc 0.09 * v ext/flex --val 0.075 * v ext/flex - - v ttl input leakage current for lp pad i ozlp cc -150 - 150 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -350 - 350 na else input leakage current for p32.0 i ozp320 cc -4900 - 4900 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -9400 - 9400 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ); for t j > 150c -5800 - 5800 na else -12000 - 12000 na else; for t j > 150c pull-up current for lp pad i puhlp cc |30| - - a v ihmin ; al |43| - - a v ihmin ; ttl - - |107| a v ilmax ; al and ttl tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-323 v 1.1 2015-05 pull-down current for lp pad i pdllp cc - - |100| a v ihmin ; al and ttl |46| - - a v ilmax ; al |21| - - a v ilmax ; ttl on-resistance for lp pad, weak driver 2) r dsonlpw cc 200 620 1040 ohm pmos/nmos ; i oh =0.5ma ; i ol =0.5ma on-resistance for lp pad, medium driver 2) r dsonlpm cc 50 155 260 ohm pmos/nmos ; i oh =2ma ; i ol =2ma rise / fall time for lp pad 3) t lp cc - - 95+2.1 * c l ns c l 50pf ; pin out driver=weak - - 200+2.9 * ( c l - 50 ) ns c l 50pf ; c l 200pf ; pin out driver=weak - - 25+0.5 * c l ns c l 50pf ; pin out driver=medium - - 50+0.75 * ( c l - 50 ) ns c l 50pf ; c l 200pf ; pin out driver=medium input high voltage for lp pad v ihlp sr (0.73* v ex t/flex )- 0.25 - - v hysteresis active, al 2.03 4) - - v hysteresis active, ttl input low voltage for lp pad v illp sr - - (0.52* v ex t/flex )- 0.25 v hysteresis active, al - - 0.8 5) v hysteresis active, ttl input low / high voltage for lp pad v ilhlp cc 1.85 - 3.0 v hysteresis inactive; not available for p14.2, p14.4, and p15.1 pad set-up time for lp pad t set_lp cc - - 100 ns input leakage current for p02.1 i oz021 cc -150 - 1030 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ); t j > 150c -150 - 340 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ); t j = 150c -420 - 1100 na else; t j > 150c -350 - 380 na else; t j = 150c pull down current for p32_0 pin i pdlp320 cc - - |105| a v ihmin ; al and ttl |41| - - a v ilmax ; al |16| - - a v ilmax ; ttl table 3-7 class lp 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-324 v 1.1 2015-05 pull up current for p32_0 pin i puhp320 cc |25| - - a v ihmin ; al |38| - - a v ihmin ; ttl - - |112| a v ilmax ; al and ttl short circuit current for lp pad 6) i sc sr -10 - 10 ma absolute max value (psi5) deviation of symmetry for rising and falling edges sym cc - - 20 % 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex 6) the values are only valid if the pad is not used during operation, otherwise i sc defines the limits for operation. table 3-8 class lp 3.3v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 50 mhz hysteresis active - - 100 mhz hysteresis inactive input hysteresis for lp pad 1) hyslp cc 0.05 * v ext/flex - - v al and ttl input leakage current for lp pad i ozlp cc -150 - 150 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -350 - 350 na else input leakage current for p32.0 i ozp320 cc -4900 - 4900 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -9400 - 9400 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ); for t j > 150 c -5800 - 5900 na else -12000 - 12000 na else; for t j > 150c pull-up current for lp pad i puhlp cc |17| - - a v ihmin ; al |19| - - a v ihmin ; ttl - - |75| a v ilmax ; al and ttl pull-down current for lp pad i pdllp cc - - |75| a v ihmin ; al and ttl |22| - - a v ilmax ; al |11| - - a v ilmax ; ttl on-resistance for lp pad, weak driver 2) r dsonlpw cc 250 875 1500 ohm ; nmos/pmos ; i oh =0.25ma ; i ol =0.25ma table 3-7 class lp 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-325 v 1.1 2015-05 on-resistance for lp pad, medium driver 2) r dsonlpm cc 70 235 400 ohm ; nmos/pmos ; i oh =1ma ; i ol =1ma rise / fall time for lp pad 3) t lp cc - - 150+3.4 * c l ns c l 50pf ; pin out driver=weak - - 320+4.5 * ( c l - 50 ) ns c l 50pf ; c l 200pf ; pin out driver=weak --30+0.8* c l ns c l 50pf ; pin out driver=medium --70+1.1 * ( c l - 50 ) ns c l 50pf ; c l 200pf ; pin out driver=medium input high voltage for lp pad v ihlp sr (0.73* v ex t/flex )- 0.25 - - v hysteresis active, al 1.6 4) - - v hysteresis active, ttl input low voltage for lp pad v illp sr - - (0.52* v ex t/flex )- 0.25 v hysteresis active, al - - 0.5 5) v hysteresis active, ttl input low / high voltage for lp pad v ilhlp cc 1.1 - 1.9 v hysteresis inactive; not available for p14.2, p14.4, and p15.1 pad set-up time for lp pad t set_lp cc - - 100 ns input leakage current for p02.1 i oz021 cc -150 - 920 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ); t j > 150c -150 - 330 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ); t j = 150c -360 - 1000 na else; t j > 150c -350 - 375 na else; t j = 150c pull down current for p32_0 pin i pdlp320 cc - - |80| a v ihmin ; al and ttl |17| - - a v ilmax ; al |6| - - a v ilmax ; ttl pull up current for p32_0 pin i puhp320 cc |12| - - a v ihmin ; al |14| - - a v ihmin ; ttl - - |80| a v ilmax ; al and ttl short circuit current for lp pad 6) i sc sr -10 - 10 ma absolute max value (psi5) deviation of symmetry for rising and falling edges sym cc - - 20 % table 3-8 class lp 3.3v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-326 v 1.1 2015-05 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex 6) the values are only valid if the pad is not used during operation, otherwise i sc defines the limits for operation. table 3-9 class mp 5v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 75 mhz hysteresis active - - 150 mhz hysteresis inactive input hysteresis for mp pad 1) hysmp cc 0.09 * v ext/flex --val 0.075 * v ext/flex - - v ttl input leakage current for mp pad i ozmp cc -500 - 500 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -1000 - 1000 na else pull-up current for mp pad i puhmp cc |30| - - a v ihmin ; al |43| - - a v ihmin ; ttl - - |107| a v ilmax ; al and ttl pull-down current for mp pad i pdlmp cc - - |100| a v ihmin ; al and ttl |46| - - a v ilmax ; al |21| - - a v ilmax ; ttl on-resistance for mp pad, weak driver 2) r dsonmpw cc 200 620 1040 ohm pmos/nmos ; i oh =0.5ma ; i ol =0.5ma on-resistance for mp pad, medium driver 2) r dsonmpm cc 50 155 260 ohm pmos/nmos ; i oh =2ma ; i ol =2ma on-resistance for mp pad, strong driver 2) r dsonmps cc 20 75 130 ohm pmos/nmos ; i oh =8ma ; i ol =8ma tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-327 v 1.1 2015-05 rise / fall time for mp pad 3) t mp cc - - 95+2.1* c l ns c l 50pf ; pin out driver=weak - - 200+2.9*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=weak --25+0.5* c l ns c l 50pf ; pin out driver=medium - - 50 + 0.75 * ( cl - 50 ) ns c l 50pf ; c l 200pf ; pin out driver=medium - - 17.5+0.25 * c l ns c l 50pf ; edge=medium ; pin out driver=strong --30+0.3*( c l -50) ns c l 50pf ; c l 200pf ; edge=medium ; pin out driver=strong - - 7+0.2* c l ns c l 50pf ; edge=sharp ; pin out driver=strong --17+0.3*( c l -50) ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=strong input high voltage for mp pad v ihmp sr (0.73* v ex t/flex )- 0.25 - - v hysteresis active, al 2.03 4) - - v hysteresis active, ttl input low voltage for mp pad v ilmp sr - - (0.52* v ex t/flex )- 0.25 v hysteresis active, al - - 0.8 5) v hysteresis active, ttl input low / high voltage for mp pad v ilhmp cc 1.85 - 3.0 v hysteresis inactive pad set-up time for mp pad t set_mp cc - - 100 ns short circuit current for mp pad 6) i sc sr -10 - 10 ma absolute max value (psi5) deviation of symmetry for rising and falling edges sym cc - - 20 % 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex 6) the values are only valid if the pad is not used during operation, otherwise i sc defines the limits for operation. table 3-9 class mp 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-328 v 1.1 2015-05 table 3-10 class mp 3.3v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 50 mhz hysteresis active - - 100 mhz hysteresis inactive input hysteresis for mp pad 1) hysmp cc 0.05 * v ext/flex - - v al and ttl input leakage current for mp pad i ozmp cc -500 - 500 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -1000 - 1000 na else pull-up current for mp pad i puhmp cc |17| - - a v ihmin ; al |19| - - a v ihmin ; ttl - - |75| a v ilmax ; al and ttl pull-down current for mp pad i pdlmp cc - - |75| a v ihmin ; al and ttl |22| - - a v ilmax ; al |11| - - a v ilmax ; ttl on-resistance for mp pad, weak driver 2) r dsonmpw cc 250 875 1500 ohm ; nmos/pmos ; i oh =0.25ma ; i ol =0.25ma on-resistance for mp pad, medium driver 2) r dsonmpm cc 70 235 400 ohm ; nmos/pmos ; i oh =1ma ; i ol =1ma on-resistance for mp pad, strong driver 2) r dsonmps cc 20 110 200 ohm pmos/nmos ; i oh =4ma ; i ol =4ma rise / fall time for mp pad 3) t mp cc - - 150+3.4* c l ns c l 50pf ; pin out driver=weak - - 320+4.5*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=weak --30+0.8* c l ns c l 50pf ; pin out driver=medium --70+1.1*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=medium - - 32.5+0.35 * c l ns c l 50pf ; edge=medium ; pin out driver=strong - - 50+0.45*( c l -50) ns c l 50pf ; c l 200pf ; edge=medium ; pin out driver=strong - - 14.5+0.35 * c l ns c l 50pf ; edge=sharp ; pin out driver=strong --32+0.5*( c l -50) ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=strong tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-329 v 1.1 2015-05 input high voltage for mp pad v ihmp sr (0.73* v ex t/flex )- 0.25 - - v hysteresis active, al 1.6 4) - - v hysteresis active, ttl input low voltage for mp pad v ilmp sr - - (0.52* v ex t/flex )- 0.25 v hysteresis active, al - - 0.5 5) v hysteresis active, ttl input low / high voltage for mp pad v ilhmp cc 1.1 - 1.9 v hysteresis inactive pad set-up time for mp pad t set_mp cc - - 100 ns short circuit current for mp pad 6) i sc sr -10 - 10 ma absolute max value (psi5) deviation of symmetry for rising and falling edges sym cc - - 20 % 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex 6) the values are only valid if the pad is not used during operation, otherwise i sc defines the limits for operation. table 3-11 class mp+ 5v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 75 mhz hysteresis active - - 150 mhz hysteresis inactive input hysteresis for mp+ pad 1) hysmpp cc 0.09 * v ext/flex --val 0.075 * v ext/flex - - v ttl input leakage current for mp+ pad i ozmpp cc -750 - 750 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -1500 - 1500 na else pull-up current for mp+ pad i puhmpp cc |30| - - a v ihmin ; al |43| - - a v ihmin ; ttl - - |107| a v ilmax ; al and ttl pull-down current for mp+ pad i pdlmpp cc - - |100| a v ihmin ; al and ttl |46| - - a v ilmax ; al |21| - - a v ilmax ; ttl table 3-10 class mp 3.3v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-330 v 1.1 2015-05 on-resistance for mp+ pad, weak driver 2) r dsonmppw cc 200 620 1040 ohm pmos/nmos ; i oh =0.5ma ; i ol =0.5ma on-resistance for mp+ pad, medium driver 2) r dsonmppm cc 50 155 260 ohm pmos/nmos ; i oh =2ma ; i ol =2ma on-resistance for mp+ pad, strong driver 2) r dsonmpps cc 20 55 90 ohm pmos/nmos ; i oh =8ma ; i ol =8ma rise/fall time for mp+ pad 3) t mpp cc - - 95+2.1* c l ns c l 50pf ; pin out driver=weak - - 200+2.9*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=weak --25+0.5* c l ns c l 50pf ; pin out driver=medium - - 50+0.75*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=medium - - 9+0.16* c l ns c l 50pf ; edge=medium ; pin out driver=strong --17+0.2*( c l -50) ns c l 50pf ; c l 200pf ; edge=medium ; pin out driver=strong - - 4+0.16* c l ns c l 50pf ; edge=sharp ; pin out driver=strong - - 12+0.21*( c l -50) ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=strong - - 5 ns from 0.8v to 2.0v (rmii) ; c l =25pf ; edge=sharp ; pin out driver=strong - - 4.5 ns c l =15pf ; edge=sharp ; pin out driver=strong input high voltage for mp+ pad v ihmpp sr (0.73* v ex t/flex )- 0.25 - - v hysteresis active, al 2.03 4) - - v hysteresis active, ttl input low voltage for mp+ pad v ilmpp sr - - (0.52* v ex t/flex )- 0.25 v hysteresis active, al - - 0.8 5) v hysteresis active, ttl input low / high voltage for mp+ pad v ilhmpp cc 1.85 - 3.0 v hysteresis inactive table 3-11 class mp+ 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-331 v 1.1 2015-05 pad set-up time for mp+ pad t set_mpp cc - - 100 ns short circuit current for mp+ pad 6) i scmpp sr -10 - 10 ma absolute max value (psi5) deviation of symmetry for rising and falling edges sym cc - - 20 % 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex 6) the values are only valid if the pad is not used during operation, otherwise i sc defines the limits for operation. table 3-12 class mp+ 3.3v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 50 mhz hysteresis active - - 100 mhz hysteresis inactive input hysteresis for mp+ pad 1) hysmpp cc 0.05 * v ext/flex --val and ttl input leakage current for mp+ pad i ozmpp cc -750 - 750 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -1500 - 1500 na else pull-up current for mp+ pad i puhmpp cc|17| --a v ihmin ; al |19| --a v ihmin ; ttl --|75| a v ilmax ; al and ttl pull-down current for mp+ pad i pdlmpp cc--|75| a v ihmin ; al and ttl |22| --a v ilmax ; al |11| --a v ilmax ; ttl on-resistance for mp+ pad, weak driver 2) r dsonmppw cc 250 875 1500 ohm ; nmos/pmos ; i oh =0.25ma ; i ol =0.25ma on-resistance for mp+ pad, medium driver 2) r dsonmppm cc 70 235 400 ohm ; nmos/pmos ; i oh =1ma ; i ol =1ma on-resistance for mp+ pad, strong driver 2) r dsonmpps cc 20 75 130 ohm pmos/nmos ; i oh =4ma ; i ol =4ma table 3-11 class mp+ 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-332 v 1.1 2015-05 rise/fall time for mp+ pad 3) t mpp cc - - 150+3.4 * c l ns c l 50pf ; pin out driver=weak - - 320+4.5 *( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=weak - - 30+0.8* c l ns c l 50pf ; pin out driver=medium - - 70+1.1*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=medium - - 20+0.2* c l ns c l 50pf ; edge=medium ; pin out driver=strong - - 30+0.3*( c l -50) ns c l 50pf ; c l 200pf ; edge=medium ; pin out driver=strong - - 13+0.2* c l ns c l 50pf ; edge=sharp ; pin out driver=strong - - 7.65 ns c l = 15pf; v ext/flex = 3.135v; v = 0v to 2.0v; edge=sharp ; pin out driver=strong - - 5.42 ns c l = 15pf; v ext/flex = 3.135v; v = 3.135v to 0.8v; edge=sharp ; pin out driver=strong - - 7.36 ns c l = 15pf; v ext/flex = 3.201v; v = 0v to 2.0v; edge=sharp ; pin out driver=strong - - 5.32 ns c l = 15pf; v ext/flex = 3.201v; v = 3.201v to 0.8v; edge=sharp ; pin out driver=strong --5.9 ns c l = 15pf; v ext/flex = 3.63v; v = 0v to 2.0v; edge=sharp ; pin out driver=strong --4.8 ns c l = 15pf; v ext/flex = 3.63v; v = 3.63v to 0.8v; edge=sharp ; pin out driver=strong - - 23+0.3*( c l -50) ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=strong - - 5 ns from 0.8v to 2.0v (rmii) ; c l =25pf ; edge=sharp ; pin out driver=strong - - 4.5 ns from 0.2 * v ext/flex to 0.8 * v ext/flex ; c l =15pf ; edge=sharp ; pin out driver=strong table 3-12 class mp+ 3.3v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-333 v 1.1 2015-05 input high voltage for mp+ pad v ihmpp sr (0.73* v e xt/flex )- 0.25 - - v hysteresis active, al 1.6 4) - - v hysteresis active, ttl input low voltage for mp+ pad v ilmpp sr - - (0.52* v e xt/flex )- 0.25 v hysteresis active, al --0.5 5) v hysteresis active, ttl input low / high voltage for mp+ pad v ilhmpp cc 1.1 - 1.9 v hysteresis inactive pad set-up time for mp+ pad t set_mpp cc - - 100 ns short circuit current for mp+ pad 6) i scmpp sr -10 - 10 ma absolute max value (psi5) deviation of symmetry for rising and falling edges sym cc--20 % 1) hysteresis is implemented to avoid metast able states and switching due to internal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex 6) the values are only valid if the pad is not used during operation, otherwise i sc defines the limits for operation. table 3-13 class mpr 5v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 75 mhz hysteresis active - - 150 mhz hysteresis inactive input hysteresis for mpr pads 1) hysmpr cc 0.09 * v ext/flex --val 0.075* v ext/flex - - v ttl input leakage current class mpr i ozmpr cc -750 - 750 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -1500 - 1500 na else pull-up current i puhmpr cc |30| - - a v ihmin ; al |43| - - a v ihmin ; ttl - - |107| a v ilmax ; al and ttl pull-down current i pdlmpr cc - - |100| a v ihmin ; al and ttl |46| - - a v ilmax ; al |21| - - a v ilmax ; ttl table 3-12 class mp+ 3.3v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-334 v 1.1 2015-05 on-resistance of the mpr pad, weak driver 2) r dsonmprw cc 200 620 1040 ohm pmos/nmos ; i oh =0.5ma ; i ol =0.5ma on-resistance of the mpr pad, medium driver 2) r dsonmprm cc 50 155 260 ohm pmos/nmos ; i oh =2ma ; i ol =2ma on-resistance of the mpr pad, strong driver 2) r dsonmprs cc 20 55 90 ohm pmos/nmos ; i oh =8ma ; i ol =8ma rise/fall time 3) t mpr cc - - 95+2.1* c l ns c l 50pf ; pin out driver=weak - - 200+2.9*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=weak --25+0.5* c l ns c l 50pf ; pin out driver=medium - - 50+0.75*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=medium - - 9+0.16* c l ns c l 0pf ; c l 50pf ; edge=medium ; pin out driver=strong --17+0.2*( c l -50) ns c l 50pf ; c l 200pf ; edge=medium ; pin out driver=strong - - 4+0.16* c l ns c l 50pf ; edge=sharp ; pin out driver=strong - - 12+0.21*( c l -50) ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=strong - - 5 ns from 0.8v to 2.0v (rmii) ; c l =25pf ; edge=sharp ; pin out driver=strong - - 4.5 ns from 0.2 * v ext/flex to 0.8 * v ext/flex ; c l =15pf ; edge=sharp ; pin out driver=strong input high voltage, class mpr pads v ihmpr sr (0.73* v ex t/flex )- 0.25 - - v hysteresis active, al 2.03 4) - - v hysteresis active, ttl input low voltage, class mpr pads v ilmpr sr - - (0.52* v ex t/flex )- 0.25 v hysteresis active, al - - 0.8 5) v hysteresis active, ttl table 3-13 class mpr 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-335 v 1.1 2015-05 input low / high voltage, class mpr pads v ilhmpr sr 1.2 - 2.3 v hysteresis inactive pad set-up time t set_mpr cc - - 100 ns short circuit current class mpr i sc sr -10 - 10 ma absolute max value (psi5) deviation of symmetry for rising and falling edges sym cc - - 20 % 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex table 3-14 class mpr 3.3v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 50 mhz hysteresis active - - 100 mhz hysteresis inactive input hysteresis for mpr pads 1) hysmpr cc 0.05 * v ext/flex - - v al and ttl input leakage current class mpr i ozmpr cc -750 - 750 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -1500 - 1500 na else pull-up current i puhmpr cc |17| - - a v ihmin ; al |19| - - a v ihmin ; ttl - - |75| a v ilmax ; al and ttl pull-down current i pdlmpr cc - - |75| a v ihmin ; al and ttl |22| - - a v ilmax ; al |11| - - a v ilmax ; ttl on-resistance of the mpr pad, weak driver 2) r dsonmprw cc 250 875 1500 ohm ; nmos/pmos ; i oh =0.25ma ; i ol =0.25ma on-resistance of the mpr pad, medium driver 2) r dsonmprm cc 70 235 400 ohm ; nmos/pmos ; i oh =1ma ; i ol =1ma on-resistance of the mpr pad, strong driver 2) r dsonmprs cc 20 75 130 ohm pmos/nmos ; i oh =4ma ; i ol =4ma table 3-13 class mpr 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-336 v 1.1 2015-05 rise/fall time 3) t mpr cc - - 150+3.4* c l ns c l 50pf ; pin out driver=weak - - 320+4.5*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=weak --30+0.8* c l ns c l 50pf ; pin out driver=medium --70+1.1*( c l -50) ns c l 50pf ; c l 200pf ; pin out driver=medium --20+0.2* c l ns c l 0pf ; c l 50pf ; edge=medium ; pin out driver=strong --30+0.3*( c l -50) ns c l 50pf ; c l 200pf ; edge=medium ; pin out driver=strong --13+0.2* c l ns c l 50pf ; edge=sharp ; pin out driver=strong --23+0.3*( c l -50) ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=strong - - 5 ns from 0.8v to 2.0v (rmii) ; c l =25pf ; edge=sharp ; pin out driver=strong - - 4.5 ns from 0.2 * v ext/flex to 0.8 * v ext/flex ; c l =15pf ; edge=sharp ; pin out driver=strong input high voltage, class mpr pads v ihmpr sr (0.73* v ex t/flex )- 0.25 - - v hysteresis active, al 1.6 4) - - v hysteresis active, ttl input low voltage, class mpr pads v ilmpr sr - - (0.52* v ex t/flex )- 0.25 v hysteresis active, al - - 0.5 5) v hysteresis active, ttl input low / high voltage, class mpr pads v ilhmpr sr 0.8 - 1.7 v hysteresis inactive pad set-up time t set_mpr cc - - 100 ns short circuit current class mpr i sc sr -10 - 10 ma absolute max value (psi5) 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. table 3-14 class mpr 3.3v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-337 v 1.1 2015-05 3) rise / fall times are defined 10% - 90% of v ext/flex . 4) v ihx = 0.27 * v ext/flex + 0.545v 5) v ilx = 0.17 * v ext/flex table 3-15 class s parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 75 mhz hysteresis active - - 150 mhz hysteresis inactive input hysteresis for s pad 1) 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. hyss cc 0.3 - - v pull-up current for s pad i puhs cc |30| - - a v ihmin - - |107| a v ilmax pull-down current for s pad i pdls cc - - |100| a v ihmin |46| - - a v ilmax input leakage current class s i ozs cc -350 - 350 na analog inputs with pull down diagnostics -150 - 150 na else input voltage high for s pad v ihs sr - - (0.73* v dd m )-0.25 v hysteresis active input voltage low for s pad v ils sr (0.52* v dd m )-0.25 - - v hysteresis active input low threshold variation for s pad 2) 2) vilsd is implemented to ensure j2716 specification. for details of dedicated pins please see ap32286 for details. v ilsd sr -50 - 50 mv max. variation of 1ms; v ddm =constant input capacitance for s pad c ins cc - - 10 pf pad set-up time for s pad t sets cc - - 100 ns table 3-16 class i 5v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 75 mhz hysteresis active - - 150 mhz hysteresis inactive input hysteresis for i pad 1) hysi cc 0.07 * v ext/flex --vporst pad only 0.09 * v ext/flex --val 0.075 * v ext/flex - - v ttl pull-up current for i pad i puhi cc |30| - - a v ihmin ; al |43| - - a v ihmin ; ttl - - |107| a v ilmax ; al and ttl tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-338 v 1.1 2015-05 pull-down current for i pad i pdli cc - - |100| a v ihmin ; al and ttl |46| - - a v ilmax ; al |21| - - a v ilmax ; ttl input leakage current for i pad i ozi cc -150 - 150 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -350 - 350 na else input high voltage for i pad v ihi sr 2.03 2) - - v hysteresis active, ttl (0.73* v ex t/flex )- 0.25 - - v hysteresis active; al; not available for the porst pad input low voltage for i pad v ili sr - - 0.8 3) v hysteresis active, ttl --(0.52* v ex t/flex )- 0.25 v hysteresis active; al; not available for the porst pad input low / high voltage for i pad v ilhi cc 1.85 - 3.0 v hysteresis inactive pad set-up time for i pad t seti cc - - 100 ns 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) v ihx = 0.27 * v ext/flex + 0.545v 3) v ilx = 0.17 * v ext/flex table 3-17 class i 3.3v parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 50 mhz hysteresis active - - 100 mhz hysteresis inactive input hysteresis for i pad 1) hysi cc 0.045 * v ext/flex --vporst pad only 0.05 * v ext/flex - - v al and ttl pull-up current for i pad i puhi cc |17| - - a v ihmin ; al |19| - - a v ihmin ; ttl - - |75| a v ilmax ; al and ttl pull-down current for i pad i pdli cc - - |75| a v ihmin ; al and ttl |22| - - a v ilmax ; al |11| - - a v ilmax ; ttl input leakage current for i pad i ozi cc -150 - 150 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -350 - 350 na else table 3-16 class i 5v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-339 v 1.1 2015-05 input high voltage for i pad v ihi sr 1.6 2) - - v hysteresis active, ttl (0.73* v ex t/flex )- 0.25 - - v hysteresis active; al; not available for the porst pad input low voltage for i pad v ili sr - - 0.5 3) v hysteresis active, ttl --(0.52* v ex t/flex )- 0.25 v hysteresis active; al; not available for the porst pad input low / high voltage for i pad v ilhi cc 1.1 - 1.9 v hysteresis inactive pad set-up time for i pad t seti cc - - 100 ns 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) v ihx = 0.27 * v ext/flex + 0.545v 3) v ilx = 0.17 * v ext/flex table 3-18 class a2 parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 160 mhz input hysteresis for a2 pad 1) hysa2 cc 0.1 * v ddp3 - - v ttl;else 0.06 * v ddp3 - - v valid for p21.6 and p21.7 input leakage current for a2 pad i oza2 cc -300 - 300 na (0.1* v ext/flex ) < v in < (0.9* v ext/flex ) -800 - 500 na else pull-up current for a2 pad i puha2 cc - - |100| a v ihmin |25| - - a v ilmax pull-down current for a2 pad i pdla2 cc |23| - - a v ihmin - - |100| a v ilmax on-resistance for a2 pad, weak driver 2) r dsona2w cc 100 200 325 ohm pmos/nmos ; i oh =0.5ma ; i ol =0.5ma on-resistance for a2 pad, medium driver 2) r dsona2m cc 40 70 100 ohm pmos/nmos ; i oh =2ma ; i ol =2ma on-resistance for a2 pad, strong driver 2) r dsona2s cc 20 35 50 ohm pmos/nmos ; i oh =8ma ; i ol =8ma table 3-17 class i 3.3v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-340 v 1.1 2015-05 rise/fall time for a2 pad 3) t a2 cc - - 20+0.8* c l ns c l 50pf ; pin out driver=weak - - 17.5+0.85 * c l ns c l 50pf ; c l 200pf ; pin out driver=weak - - 12+0.16* c l ns c l 50pf ; pin out driver=medium - - 11.5+0.17 * c l ns c l 50pf ; c l 200pf ; pin out driver=medium - - 6+0.06* c l ns c l 50pf ; edge=medium ; pin out driver=strong - - 5.5+0.07* c l ns c l 50pf ; c l 200pf ; edge=medium ; pin out driver=strong - - 0.0+0.12* c l ns c l 50pf ; edge=sharp ; pin out driver=strong - - 0.0+0.12* c l ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=strong input high voltage for a2 pad v iha2 sr 2.04 4) - - v ttl;valid for all a2 pads except tms/dap1, trst, and tck/dap0 0.7 * v ddp3 - - v valid for tms/dap1, trst, and tck/dap0 input low voltage for a2 pad v ila2 sr - - 0.8 5) v ttl;valid for all a2 pads except tms/dap1, trst, and tck/dap0 - - 0.3 * v ddp3 v valid for tms/dap1, trst, and tck/dap0 pad set-up time for a2 pad t seta2 cc - - 100 ns deviation of symmetry for rising and falling edges sym cc - - 20 % 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ddp3 . 4) v ihx = 0.57 * v ddp3 - 0.03v 5) v ilx = 0.25 * v ddp3 + 0.058v table 3-18 class a2 (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specification5 v / 3.3 v switchable pads data sheet 3-341 v 1.1 2015-05 table 3-19 driver mode selection for lp pads pdx.2 pdx.1 pdx.0 port functionality driver setting x x 0 speed grade 1 medium (lpm) x x 1 speed grade 2 weak (lpw) table 3-20 driver mode selection for mp / mp+ pads pdx.2 pdx.1 pdx.0 port functionality driver setting x 0 0 speed grade 1 strong sharp edge (mpss / mp+ss) x 0 1 speed grade 2 strong medium edge (mpsm / mp+sm) x 1 0 speed grade 3 medium (mpm / mp+m) x 1 1 speed grade 4 weak (mpw / mp+w) table 3-21 driver mode selection for a2 pads pdx.2 pdx.1 pdx.0 port functionality driver setting x 0 0 speed grade 1 strong sharp edge x 0 1 speed grade 2 strong medium edge x 1 0 speed grade 3 medium x 1 1 speed grade 4 weak table 3-22 driver mode selection for f pads pdx.2 pdx.1 pdx.0 port functionality driver setting x 0 0 speed grade 1 reduced strong sharp edge x 0 1 speed grade 2 reduced strong medium edge x 1 0 speed grade 3 medium x 1 1 speed grade 4 weak tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionhigh performance lvds pads (lvdsh) data sheet 3-342 v 1.1 2015-05 3.6 high performance lvds pads (lvdsh) this lvds pad type is used for the high speed chip to chip communication inferface of the new tc290 / TC297 / tc298 / tc299. it compose out of a lvdsh pad and a class f pad. this pad combination is always supplied by the 3.3v supply rail. table 3-23 class f parameter symbol values unit note / test condition min. typ. max. input frequency f in sr - - 75 mhz input hysteresis for f pad 1) hysf cc 0.1 * v ddp3 - - v ttl input leakage current for f pad i ozf cc -1000 - - na (0.1* v ddp3 ) < v in < (0.9* v ddp3 ); valid for p21.0, p21.1, p21.2 and p21.3; t j = 150c - - 1000 na (0.1* v ddp3 ) < v in < (0.9* v ddp3 ); valid for p21.0, p21.1, p21.2 and p21.3; t j = 150ac -1500 - 1500 na (0.1* v ddp3 ) < v in < (0.9* v ddp3 ); valid for p21.0, p21.1, p21.2 and p21.3; t j = 170ac -300 - 300 na (0.1* v ddp3 ) < v in < (0.9* v ddp3 ); valid for p21.4 and p21.5 - - 2000 na else; valid for p21.0, p21.1, p21.2 and p21.3; t j = 150c -2000 - - na else; valid for p21.0, p21.1, p21.2 and p21.3; t j = 150ac -3000 - 3000 na else; valid for p21.0, p21.1, p21.2 and p21.3; t j = 170ac -600 - 600 na else; valid for p21.4 and p21.5 pull-up current for f pad i puhf cc |25| - - a v ihmin - - |100| a v ilmax pull-down current for class f pads i pdlf cc - - |100| a v ihmin |25| - - a v ilmax on resistance for f pad, weak driver 2) r dsonfw cc 100 200 325 ohm pmos/nmos ; i oh =0.5ma ; i ol =0.5ma tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionhigh performance lvds pads (lvdsh) data sheet 3-343 v 1.1 2015-05 c l = 2.5 pf for all lvdsh parameters. on resistance for f pad, medium driver 2) r dsonfm cc 40 70 100 ohm pmos/nmos ; i oh =2ma ; i ol =2ma on resistance for f pad, strong driver 2) r dsonfs cc 20 50 80 ohm pmos/nmos ; i oh =4ma ; i ol =4ma rise/fall time for f pad 3) t rff cc - - 20+0.8* c l ns c l 50pf ; pin out driver=weak - - 17.5+0.85 * c l ns c l 50pf ; c l 200pf ; pin out driver=weak - - 12+0.16* c l ns c l 50pf ; pin out driver=medium - - 11.5+0.17 * c l ns c l 50pf ; c l 200pf ; pin out driver=medium - - 7+0.16* c l ns c l 50pf ; edge=medium ; pin out driver=reduced strong - - 6.5+0.17* c l ns c l 50pf ; c l 200pf ; edge=meduim ; pin out driver>reduced strong - - 4+0.16* c l ns c l 50pf ; edge=sharp ; pin out driver=reduced strong - - 3.5+0.17* c l ns c l 50pf ; c l 200pf ; edge=sharp ; pin out driver=reduced strong input high voltage for f pad v ihf sr 2.04 4) - - v ttl input low voltage for f pad v ilf sr - - 0.8 5) v ttl pad set-up time for f pad t setf cc - - 100 ns deviation of symmetry for rising and falling edges sym cc - - 20 % 1) hysteresis is implemented to avoid me tastable states and switching due to inte rnal ground bounce. it can't be guaranteed that it suppresses switching due to external system noise. 2) for currents smaller than the i ol/oh from the test condition the defined max. value stays unchanged. 3) rise / fall times are defined 10% - 90% of v ddp3 . 4) v ihx = 0.57 * v ddp3 - 0.03v 5) v ilx = 0.25 * v ddp3 + 0.058v table 3-23 class f (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionhigh performance lvds pads (lvdsh) data sheet 3-344 v 1.1 2015-05 table 3-24 lvdsh - ieee standard lv ds general pur pose link (gpl) parameter symbol values unit note / test condition min. typ. max. output impedance r 0 cc 40 - 140 ohm vcm = 1.0 v and 1.4 v rise time 1) 1) rise / fall times are defined for 20% - 80% of v od t rise20 cc - - 0.5 ns zl = 100 ohm 5% @2 pf fall time 1) t fall20 cc - - 0.5 ns zl = 100 ohm 5% @ 2 pf output differential voltage v od cc 250 - 400 mv rt = 100 ohm 5% output voltage high v oh cc - - 1475 mv rt = 100 ohm 5% (400 mv/2) + 1275 mv output voltage low v ol cc 925 - - mv rt = 100 ohm 5% output offset (common mode) voltage v os cc 1125 - 1275 mv rt = 100 ohm 5% input voltage range v i sr 0 - 1600 mv driver ground potential difference < 925 mv; rt = 100 ohm 10% 0 - 2000 mv driver ground potential difference < 925 mv; rt = 100 ohm 20% input differential threshold v idth sr -100 - 100 mv driver ground potential difference < 925 mv delta output impedance dr0 sr - - 10 % vcm = 1.0 v and 1.4 v (mismatch pd and pn) change in vos between 0 and 1 dvos cc - - 25 mv rt = 100 ohm 5% change in vod between 0 and 1 dvod cc - - 25 mv rt = 100 ohm 5% duty cycle t duty cc 45 - 55 % table 3-25 lvdsh - ieee standard lvds reduced link (redl) parameter symbol values unit note / test condition min. typ. max. output impedance r 0 cc 40 - 140 ohm vcm = 1.0 v and 1.4 v output differential voltage v od cc 150 - 250 mv rt = 100 ohm 5% output voltage high v oh cc - - 1375 mv rt = 100 ohm 5% output voltage low v ol cc 1025 - - mv rt = 100 ohm 5% output offset (common mode) voltage v os cc 1125 - 1275 mv rt = 100 ohm 5% input voltage range v i sr 825 - 1575 mv driver ground potential difference < 50 mv tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionhigh performance lvds pads (lvdsh) data sheet 3-345 v 1.1 2015-05 default after start-up = cmos function figure 3-1 lvdsh pad input model input differential threshold v idth sr -100 - 100 mv driver ground potential difference < 50 mv change in vos between 0 and 1 dvos cc - - 25 mv rt = 100 ohm 5% change in vod between 0 and 1 dvod cc - - 25 mv rt = 100 ohm 5% duty cycle t duty cc 45 - 55 % v od fall time 1) t fall10 cc - - 0.5 ns zl = 100 ohm 5% @ 2pf v od rise time 1) t rise10 cc - - 0.5 ns zl = 100 ohm 5% @ 2pf 1) rise / fall times are defined for 10% - 90% of v od table 3-25 lvdsh - ieee standard lvds reduced link (redl) (cont?d) parameter symbol values unit note / test condition min. typ. max. c total =3.5pf lvdsh _input _pad _m odel .vsd h total =5nh lvdsh in p n r t =100ohm c total =3.5pf r in c ext =2pf c ext =2pf h total =5nh tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationmedium performance lvds pads (lvdsm) data sheet 3-346 v 1.1 2015-05 3.7 medium performance lvds pads (lvdsm) this lvds pad type is used for the medium speed chip to chip communication inferface of the new tc290 / TC297 / tc298 / tc299. it compose out of a lvdsm pad and a mp pad. this pad combination is always supplied by the 5v or 3.3v. for the parameters of the mp pad please see chapter 3.5 . default after start-up = cmos function table 3-26 lvdsm parameter symbol values unit note / test condition min. typ. max. output impedance r o cc 40 100 140 ohm fall time t f cc - - 2.5 ns z load = 100 ohm; termination 100 ohm 1% rise time t r cc - - 2.5 ns z load = 100 ohm; termination 100 ohm 1% pad set-up time t set_lvds cc -1013 s output differe ntial voltage v od cc 250 - 400 mv termination 100 ohm 1% output voltage high v oh cc - - 1475 mv termination 100 ohm 1% output voltage low v ol cc 925 - - mv termination 100 ohm 1% output offset voltage v os cc 1125 - 1275 mv termination 100 ohm 1% tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationvadc parameters data sheet 3-347 v 1.1 2015-05 3.8 vadc parameters vadc parameter are valid for v ddm = 4.5 v to 5.5 v. this table also covers the parameters for class d pads. table 3-27 vadc parameter symbol values unit note / test condition min. typ. max. analog reference voltage 1) v aref sr v agnd + 1.0 - v ddm + 0.05 v analog reference ground v agnd sr v ssm - 0.05 - v ssm + 0.05 v analog input voltage range v ain sr v agnd - v aref v converter reference clock f adci sr 2 - 20 mhz charge consumption per conversion 2) 3) q conv cc - 50 75 pc v ain = 5 v, charge consumed from reference pin, precharging disabled - 10 22 pc v ain = 5 v, charge consumed from reference pin, precharging enabled conversion time for 12-bit result t c12 cc - (16 + stc) x t adci + 2 x t vadc - includes sample time and post calibration conversion time for 10-bit result t c10 cc - (14 + stc) x t adci + 2 x t vadc - includes sample time conversion time for 8-bit result t c8 cc - (12 + stc) x t adci + 2 x t vadc - includes sample time conversion time for fast compare mode t cf cc - (4 + stc) x t adci + 2 x t vadc - includes sample time broken wire detection delay against v agnd 4) t bwg cc - - 120 cycles result below 10% broken wire detection delay against v aref 5) t bwr cc - - 60 cycles result above 80% input leakage at analog inputs i oz1 cc -350 - 350 na analog inputs overlaid with class lp pads or pull down diagnostics -150 - 150 na else total unadjusted error 1) tue cc -4 6) -4 6) lsb 12-bit resolution tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationvadc parameters data sheet 3-348 v 1.1 2015-05 inl error ea inl cc -3 - 3 lsb 12-bit resolution gain error 1) ea gain cc -3.5 - 3.5 lsb 12-bit resolution dnl error 1) ea dnl cc -3 - 3 lsb 12-bit resolution offset error 1) ea off cc -4 - 4 lsb 12-bit resolution total capacitance of an analog input c aint cc - - 30 pf switched capacitance of an analog input c ains cc 2 4 7 pf resistance of the analog input path r ain cc - - 1.5 kohm else - - 1.8 kohm valid for analog inputs mapped to gpios switched capacitance of a reference input c arefs cc - - 30 pf rms noise 7) en rms cc - 0.5 0.8 6)8) lsb positive reference v arefx pin leakage i oz2 cc -7 - 7 a v arefx = v aref2 ; v aref > v ddm v ; t j >150c -4 - 4 a v arefx = v aref2 ; v aref > v ddm v ; t j 150c -2 - 3 a v arefx = v aref2 ; v aref v ddm v ; t j >150c -1 - 1 a v arefx = v aref2 ; v aref v ddm v ; t j 150c negative reference v agndx pin leakage i oz3 cc -13 - 13 a v agndx = v agnd2 ; v agnd < v ssm v ; t j >150c -7 - 7 a v agndx = v agnd2 ; v agnd < v ssm v ; t j 150c -4.5 - 2.5 a v agndx = v agnd2 ; v aref v ddm v ; t j >150c -2.5 - 1 a v agndx = v agnd2 ; v aref v ddm v ; t j 150c resistance of the reference input path r aref cc - - 1 kohm csd resistance 9) r csd cc - - 28 kohm table 3-27 vadc (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationvadc parameters data sheet 3-349 v 1.1 2015-05 the following vadc parameter are valid for v ddm = 2.97 v to 4.5 v. this table also covers the parameters for class d pads. resistance of the pull-down test device 10) r pdd cc - - 0.3 kohm csd voltage accuracy 11) 12) dvcsd cc - - 10 % 1) if the reference voltage is reduced by the factor k (k < 1), tue,dnl,inl,gain, and offset errors increase also by the factor 1/k. v aref must be decoupled with an external capacitor. 2) for qconv = x pc and a conversion time of 1 s a rms value of x a results for i arefx . 3) for the details of the mapping for a vadc group to pin v arefx please see the user's manual. 4) the broken wire detection delay against v agnd is measured in numbers of consecut ive precharge cycles at a conversion rate higher than 1 conversion per 500 ms. 5) the broken wire detection delay against v aref is measured in numbers of consecut ive precharge cycles at a conversion rate higher than 1 conversion per 10 ms. this function is in fluenced by leakage current, in particular at high temperature. 6) resulting worst case combined error is arithmetic combination of tue and en rms . 7) this parameter is valid for soldered devic es and requires careful analog board design. 8) value is defined for one sigma gauss distribution. 9) in order to avoid an additional error due to incomplete sampling, the sampling time shall be set greater than 5 * r csd * c ains . 10) the pull-down resistor r pdd is connected between the input pad and the analog multiplexer. the input pad itself adds another 200-ohm series resi stance, when measuring through the pin. 11) csd: converter self diagnostics, for details please consult the user's manual. 12) note, that in case csd voltage is chosen to nom. 1/3 or 2/3 of v aref voltage, the reference voltage is loaded with a current of max. v aref / 45 kohm. table 3-28 vadc_33v parameter symbol values unit note / test condition min. typ. max. analog reference voltage 1) v aref sr v agnd + 1.0 - v ddm + 0.05 v analog reference ground v agnd sr v ssm - 0.05 - v ssm + 0.05 v analog input voltage range v ain sr v agnd - v aref v converter reference clock f adci sr 2 - 20 mhz charge consumption per conversion 2) 3) q conv cc - 35 50 pc v ain = 3.3 v, charge consumed from reference pin, precharging disabled -817 pc v ain = 3.3 v, charge consumed from reference pin, precharging enabled conversion time for 12-bit result t c12 cc - (16 + stc) x t adci + 2 x t vadc - includes sample time and post calibration table 3-27 vadc (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationvadc parameters data sheet 3-350 v 1.1 2015-05 conversion time for 10-bit result t c10 cc - (14 + stc) x t adci + 2 x t vadc - includes sample time conversion time for 8-bit result t c8 cc - (12 + stc) x t adci + 2 x t vadc - includes sample time conversion time for fast compare mode t cf cc - (4 + stc) x t adci + 2 x t vadc - includes sample time broken wire detection delay against v agnd 4) t bwg cc - - 120 cycles result below 10% broken wire detection delay against v aref 5) t bwr cc - - 60 cycles result above 80% input leakage at analog inputs i oz1 cc -350 - 350 na analog inputs overlaid with class lp pads or pull down diagnostics -150 - 150 na else total unadjusted error 1) tue cc -12 6) -12 6) lsb 12-bit resolution; t j > 150 c -6 6) -6 6) lsb 12-bit resolution; t j 150 c inl error ea inl cc -12 - 12 lsb 12-bit resolution; t j > 150 c -5 - 5 lsb 12-bit resolution; t j 150 c gain error 1) ea gain cc -6 - 6 lsb 12-bit resolution; t j > 150 c -5.5 - 5.5 lsb 12-bit resolution; t j 150 c dnl error 1) ea dnl cc -4 - 4 lsb 12-bit resolution offset error 1) ea off cc -6 - 6 lsb 12-bit resolution; t j > 150 c -5 - 5 lsb 12-bit resolution; t j 150 c total capacitance of an analog input c aint cc - - 30 pf switched capacitance of an analog input c ains cc 2 4 7 pf resistance of the analog input path r ain cc - - 4.5 kohm table 3-28 vadc_33v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationvadc parameters data sheet 3-351 v 1.1 2015-05 switched capacitance of a reference input c arefs cc - - 30 pf rms noise 7) en rms cc - - 1.7 6)8) lsb target positive reference v arefx pin leakage i oz2 cc -6 - 6 a v arefx = v aref2 ; v aref > v ddm v ; t j >150c -3.5 - 3.5 a v arefx = v aref2 ; v aref > v ddm v ; t j 150c -2 - 2.5 a v arefx = v aref2 ; v aref v ddm v ; t j >150c -1 - 1 a v arefx = v aref2 ; v aref v ddm v ; t j 150c negative reference v agndx pin leakage i oz3 cc -12 - 12 a v agndx = v agnd2 ; v agnd < v ssm v ; t j >150c -6.5 - 6.5 a v agndx = v agnd2 ; v agnd < v ssm v ; t j 150c -2.2 - 2 a v agndx = v agnd2 ; v aref v ddm v ; t j >150c -1 - 1 a v agndx = v agnd2 ; v aref v ddm v ; t j 150c resistance of the reference input path r aref cc - - 3 kohm csd resistance 9) r csd cc - - 28 kohm resistance of the pull-down test device 10) r pdd cc - - 0.9 kohm csd voltage accuracy 11) 12) dvcsd cc - - 10 % 1) if the reference voltage is reduced by the factor k (k < 1), tue,dnl,inl,gain, and offset errors increase also by the factor 1/k. v aref must be decoupled with an external capacitor. 2) for qconv = x pc and a conversion time of 1 s a rms value of x a results for i arefx . 3) for the details of the mapping for a vadc group to pin v arefx please see the user's manual. 4) the broken wire detection delay against v agnd is measured in numbers of consecut ive precharge cycles at a conversion rate higher than 1 conversion per 500 ms. 5) the broken wire detection delay against v aref is measured in numbers of consecut ive precharge cycles at a conversion rate higher than 1 conversion per 10 ms. this function is in fluenced by leakage current, in particular at high temperature. 6) resulting worst case combined error is arithmetic combination of tue and en rms . 7) this parameter is valid for soldered devic es and requires careful analog board design. 8) value is defined for one sigma gauss distribution. table 3-28 vadc_33v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationvadc parameters data sheet 3-352 v 1.1 2015-05 figure 3-2 equivalent circuitry for analog inputs 9) in order to avoid an additional error due to incomplete sampling, the sampling time shall be set greater than 5 * r csd * c ains . 10) the pull-down resistor r pdd is connected between the input pad and the analog multiplexer. the input pad itself adds another 200-ohm series resi stance, when measuring through the pin. 11) csd: converter self diagnostics, for details please consult the user's manual. 12) note, that in case csd voltage is chosen to nom. 1/3 or 2/3 of v aref voltage, the reference voltage is loaded with a current of max. v aref / 45 kohm. a/d converter mcs05570 r sour ce v ain c ext c aint c ains - r ain, on c ains tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationdsadc parameters data sheet 3-353 v 1.1 2015-05 3.9 dsadc parameters the following dsadc parameter are valid for v ddm = 4.5 v to 5.5 v. table 3-29 dsadc parameter symbol values unit note / test condition min. typ. max. analog input voltage range 1) v dsin sr 0 - 5 v single ended 0 - 10 v differential; v dsxp - v dsxn reference load current i ref sr - 4.5 5.5 a per twin-modulator (1 or 2 channels) modulator clock frequency 2) f mod sr 10 - 20 mhz gain error ed gain cc -1 - 1 3) % calibrated once -3.5 4) -3.5 4) % uncalibrated -0.2 - 0.2 5) % calibrated; gain = 1; modcfg.incfgx=01 dc offset error ed off cc -5 - 5 5) mv calibrated -50 - 50 mv calibrated once -100 4) 0 4) 100 4) mv gain = 1; uncalibrated common mode rejection ratio ed cm cc 200 500 - input impedance 6) r dain cc 100 130 170 kohm exact value (1%) available in ucb signal-noise ratio 7) 8) 9) 10) snr cc 80 - - db f pb = 30 khz; v ddm = 5%; f mod = 20 mhz; gain = 1 78 - - db f pb = 50 khz; v ddm = 5%; f mod = 20 mhz; gain = 1 70 - - db f pb = 100 khz; v ddm = 10%; f mod = 20 mhz; gain = 1 74 - - db f pb = 100 khz; v ddm = 5%; f mod = 20 mhz; gain = 1 76 - - db f pb = 30 khz; v ddm = 10%; f mod = 20 mhz; gain = 1 74 - - db f pb = 50 khz; v ddm = 10%; f mod = 20 mhz; gain = 1 pass band f pb cc 10 11) - 100 khz output data rate f d = f pb * 3 pass band ripple 8) df pb cc -1 - 1 % output sampling rate f d cc 30 - 330 khz tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationdsadc parameters data sheet 3-354 v 1.1 2015-05 dc compensation factor dcf cc -3 - - db 10 -5 f d positive reference v aref1 pin leakage i oz5 cc -2 - 2 a negative reference v agnd1 pin leakage i oz6 cc -3 - 2 a stop band attenuation 8) sba cc 40 - - db 0.5 ... 1 f d 45 - - db 1 ... 1.5 f d 50 - - db 1.5 ... 2 f d 55 - - db 2 ... 2.5 f d 60 - - db 2.5 ... osr/2 f d reference ground voltage v agnd sr v ssm - 0.05 - v ssm + 0.05 v positive reference voltage v aref sr v ddmnom * 0.9 - v ddm + 0.05 v common mode voltage accuracy dv cm cc -100 - 100 mv from selected voltage common mode hold voltage deviation 12) dv cmh cc -200 - 200 mv from common mode voltage analog filter settling time t afset cc - 2 4 s if enabled modulator recovery time t mrec cc - 3.5 5.5 s after leaving overdrive state modulator settling time 13) t mset cc - 1 - s after switching on, voltage regulator already running spurious free dynamic range 7)14) sfdr cc 60 - - db v cm = 2.2 v, dc coupled; v ddm = 10% 60 - - db v cm = 2.2 v, dc coupled; v ddm = 5% 1) the maximum input range for symmetrical signals (e.g. ac -coupled inputs) depends on the selected internal/external common mode voltage. in this case the amplitude is limited to v cm * 2. 2) all modulators must run on the same frequency. 3) the calibration sequence must be execut ed once after an application reset 4) the total dc error for the uncalibrated case can be calculated by the geometric addition of ed gain and ed off 5) recalibration needed in case of a temperature change > 20oc 6) the variation of the impedance be tween different channels is < 1.5%. 7) derating factors: -2 db in standard-performance mode. -3 db for cmv = 10 b , i.e. v cm = ( v aref 2%) / 2.0. 8) cic3, fir0, fir1 filters enabled. 9) single-ended mode reduces the snr by 6 db if the unused in put is grounded, by 3 db if the unused input connects to v cm (gain = 2). 10) the defined limits are only valid if the following condition is not applicable: t j > 150c and v varef > v ddm . 11) 10 khz only reachable with 10 mhz modulator clock frequency. table 3-29 dsadc (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationdsadc parameters data sheet 3-355 v 1.1 2015-05 the following dsadc parameter are valid for v ddm = 2.97 v to 4.5 v. 12) voltage v cm is proportional to v aref , voltage v cmh is proportional to v ddm . 13) the modulator needs to settle after being swit ched on and after leaving the overdrive state. 14) sfdr = 20 * log(inl / 2 n ) table 3-30 dsadc_33v parameter symbol values unit note / test condition min. typ. max. analog input voltage range 1) v dsin sr 0 - 3.3 v single ended 0 - 6.6 v differential; v dsxp - v dsxn reference load current i ref sr - 4.5 5.5 a per twin-modulator (1 or 2 channels) modulator clock frequency 2) f mod sr 10 - 20 mhz gain error ed gain cc -1.5 - 1.5 3) % calibrated once -10 4) -10 4) % uncalibrated -0.3 - 0.3 5) % calibrated; gain = 1; modcfg.incfgx=01 dc offset error ed off cc -5 - 5 5) mv calibrated -50 - 50 mv calibrated once -100 4) 0 4) 100 4) mv gain = 1; uncalibrated common mode rejection ratio ed cm cc 200 500 - input impedance 6) r dain cc 100 130 170 kohm exact value (1%) available in ucb signal-noise ratio 7) 8) 9) 10) snr cc 45 63 - db f pb = 100khz; v ddm = 10%; f mod = 20 mhz; gain = 1 60 69 - db f pb = 100khz; v ddm = 5%; f mod = 20 mhz; gain = 1 60 68 - db f pb = 30khz; v ddm = 10%; f mod = 20 mhz; gain = 1 69 74 - db f pb = 30khz; v ddm = 5%; f mod = 20 mhz; gain = 1 55 66 - db f pb = 50khz; v ddm = 10%; f mod = 20 mhz; gain = 1 65 72 - db f pb = 50khz; v ddm = 5%; f mod = 20 mhz; gain = 1 pass band f pb cc 10 11) - 100 khz output data rate f d = f pb * 3 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationdsadc parameters data sheet 3-356 v 1.1 2015-05 pass band ripple 8) df pb cc -1 - 1 % output sampling rate f d cc 30 - 330 khz dc compensation factor dcf cc -3 - - db 10 -5 f d positive reference v aref1 pin leakage i oz5 cc -2 - 2 a negative reference v agnd1 pin leakage i oz6 cc -3 - 2 a stop band attenuation 8) sba cc 40 - - db 0.5 ... 1 f d 45 - - db 1 ... 1.5 f d 50 - - db 1.5 ... 2 f d 55 - - db 2 ... 2.5 f d 60 - - db 2.5 ... osr/2 f d reference ground voltage v agnd sr v ssm - 0.05 - v ssm + 0.05 v positive reference voltage v aref sr v ddmnom * 0.9 - v ddm + 0.05 v common mode voltage accuracy dv cm cc -100 - 100 mv from selected voltage common mode hold voltage deviation 12) dv cmh cc -200 - 200 mv from common mode voltage analog filter settling time t afset cc - 2 4 s if enabled modulator recovery time t mrec cc - 3.5 - s after leaving overdrive state modulator settling time 13) t mset cc - 1 - s after switching on, voltage regulator already running spurious free dynamic range 7)14) sfdr cc 52 - - db v cm = 2.2 v, dc coupled; v ddm = 10% 60 - - db v cm = 2.2 v, dc coupled; v ddm = 5% 1) the maximum input range for symmetrical signals (e.g. ac -coupled inputs) depends on the selected internal/external common mode voltage. in this case the amplitude is limited to v cm * 2. 2) all modulators must run on the same frequency. 3) the calibration sequence must be execut ed once after an application reset 4) the total dc error for the uncalibrated case can be calculated by the geometric addition of ed gain and ed off 5) recalibration needed in case of a temperature change > 20oc. 6) the variation of the impedance be tween different channels is < 1.5%. 7) derating factors: -2 db in standard-performance mode. -3 db for cmv = 10 b , i.e. v cm = ( v aref 2%) / 2.0. 8) cic3, fir0, fir1 filters enabled. 9) single-ended mode reduces the snr by 6 db if the unused in put is grounded, by 3 db if the unused input connects to v cm (gain = 2). table 3-30 dsadc_33v (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationdsadc parameters data sheet 3-357 v 1.1 2015-05 figure 3-3 dsadc analog inputs 10) the defined limits are only valid if the following condition is not applicable: t j > 150c and v varef > v ddm . 11) 10 khz bandwidth only with 10mhz modulator clock frequency reachable 12) voltage v cm is proportional to v aref , voltage v cmh is proportional to v ddm . 13) the modulator needs to settle after being swit ched on and after leaving the overdrive state. 14) sfdr = 20 * log(inl / 2 n ) mc_dsadc_modulatorblock input modu - lator 130 k v cm gain gain 37 k 130 k 37 k = v offset tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationmhz oscillator data sheet 3-358 v 1.1 2015-05 3.10 mhz oscillator osc_xtal is used as accurate and exact clock source. osc_xtal supports 8 mhz to 40 mhz crystals external outside of the device. support of ceramic resonators is also provided. note: it is strongly re commended to measure the oscilla tion allowance (negative resi stance) in the final target system (layout) to determine the opti mal parameters for the oscillator oper ation. please refer to the limits specified by the crystal or ceramic resonator supplier. table 3-31 osc_xtal parameter symbol values unit note / test condition min. typ. max. input current at xtal1 i ix1 cc -25 - 25 a v in >0v ; v in < v ddp3 v oscillator frequency f osc sr 4 - 40 mhz direct input mode selected 8 - 40 mhz external crystal mode selected oscillator start-up time 1) 1) t oscs is defined from the moment when v ddp3 = 3.13v until the oscillations reac h an amplitude at xtal1 of 0.3 * v ddp3 . the external oscillator circuitry must be optimized by th e customer and checked for n egative resistance as recommended and specified by crystal suppliers. t oscs cc - - 5 2) 2) this value depends on the frequency of the used external crystal. for faster crystal frequencies this value decrease. ms input high voltage at xtal1 v ihbx sr 0.8 - v ddp3 + 0.5 v if shaper is bypassed input low voltage at xtal1 v ilbx sr -0.5 - 0.4 v if shaper is bypassed input voltage at xtal1 v ix sr -0.5 - v ddp3 + 0.5 v if shaper is not bypassed input amplitude (peak to peak) at xtal1 v ppx sr 0.3 * v ddp3 - v ddp3 + 1.0 v if shaper is not bypassed; f osc > 25mhz 0.4 * v ddp3 - v ddp3 + 1.0 v if shaper is not bypassed; f osc 25mhz internal load capacitor c l0 cc 2 2.35 2.7 pf internal load capacitor c l1 cc 2 2.35 2.7 pf internal load capacitor c l2 cc 3 3.5 4 pf internal load capacitor c l3 cc 5.1 5.9 6.6 pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationback-up clock data sheet 3-359 v 1.1 2015-05 3.11 back-up clock the back-up clock provides an alternative clock source. table 3-32 back-up clock parameter symbol values unit note / test condition min. typ. max. back-up clock before trimming f backut cc 75 100 125 mhz v ext 2.97v back-up clock after trimming f backt cc 97.5 100 102.5 mhz v ext 2.97v tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationtemperature sensor data sheet 3-360 v 1.1 2015-05 3.12 temperature sensor the following formula calculates the temperature measured by the dts in [ o c] from the result bit field of the dtsstat register. (3.1) table 3-33 dts parameter symbol values unit note / test condition min. typ. max. measurement time t m cc - - 100 s calibration reference accuracy t calacc cc -1 - 1 c calibration points @ t j =-40c and t j =127c non-linearity accuracy over temperature range t nl cc -2 - 2 c temperature sensor range t sr sr -40 - 170 c start-up time after resets inactive t tsst sr - - 20 s tj dtsstatresult 607 () ? 213 , --------------------------------------------------------------------------- - = tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower supply current data sheet 3-361 v 1.1 2015-05 3.13 power supply current the total power supply current defined below c onsists of leakage and switching component. application relevant values are typically lower than those given in the following table and depend on the customer's system operating conditions (e.g. thermal co nnection or used application configurations). the operating conditions for the parameters in the following table are: the real (realisic) power pattern defines the following conditions: ? t j = 150 c ? f cpu0 =200mhz ? f sri = f max = f cpu1 = f cpu2 300 mhz ? f spb = f stm = f gtm = f baud1 = f baud2 = f asclin =50mhz ? v dd =1.326v ? v ddp3 =3.366v ? v ext / flex = v ddm =5.1v ? all cores are active including one lockstep core ? the following peripherals are inactive: ebu, hsm, hsct , ethernet, psi5, i2c, fce, mtu, and 50% of the dsadc channels the max power pattern defines the following conditions: ? t j = 150 c ? f cpu0 =200mhz ? f sri = f max = f cpu1 = f cpu2 300 mhz ? f spb = f stm = f gtm = f baud1 = f baud2 = f asclin = 100 mhz ? v dd =1.43v ? v ddp3 =3.63v ? v ext / flex = v ddm =5.5v ? all cores and lockst ep cores are active ? all peripherals are active tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower supply current data sheet 3-362 v 1.1 2015-05 table 3-34 power supply parameter symbol values unit note / test condition min. typ. max. sum of i dd 1.3 v core and peripheral supply currents i dd cc - - 750 ma max power pattern with f sri/cpux = 270 mhz with v dd = 1.3v + 10%; valid for feature package t, tp, and tc products - - 800 ma max power pattern with fsri/cpux = 300 mhz with vdd = 1.33v + 7.5%. valid for feature package t, tp, and tc products - - 950 ma max power pattern. valid for feature package ta and tb products - - 930 ma max power pattern. valid for feature package tx and ty products - - 567 ma real power pattern. valid for feature package t, tp, and tc products - - 637 ma real power pattern. valid for feature package ta, tb, tx and ty products tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower supply current data sheet 3-363 v 1.1 2015-05 i dd core current during active power-on reset (porst held low) i ddporst cc - - 140 ma valid for feature package t, tp, and tc products; t j =125c - - 220 ma valid for feature package t, tp, and tc products; t j =150c - - 176 ma valid for feature package ta, tb, tx, and ty products; t j =125c - - 310 ma valid for feature package t, tp, and tc products; t j =165c - - 290 ma valid for feature package ta, tb, tx, and ty products; t j =150c - - 405 ma valid for feature package ta, tb, tx, and ty products; t j =165c i dd core current of cpu1 main core with cpu1 lockstep core inactive i ddc10 cc - - 62 ma real power pattern i dd core current of cpu1 main core with lockstep core active i ddc11 cc - - i ddc10 + 48 ma real power pattern i dd core current of cpu2 main core i ddc20 cc - - 60 ma real power pattern i dd core current added by hsm i ddhsm cc - - 20 ma hsm running at 100mhz. i dd core current added by amu i ddamu cc - - 48 ma real power pattern i dd core current added by fft i ddfft cc - - 40 ma fft running at 200mhz sum of 3.3 v supply currents without pad activity i ddx3rail cc - - 104 1) ma real power pattern i ddfl3 flash memory current i ddfl3 cc - - 84 2) ma flash read current --84 3) ma flash read current while programming dflash table 3-34 power supply (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower supply current data sheet 3-364 v 1.1 2015-05 i ddp3 supply current without pad activity i ddp3 cc - - 29 2) ma real power pattern; incl. osc & flash read current --46 3) ma incl. osc and flash programming current --46 4) ma incl. osc current and flash 3.3v programming current when using external 5v supply i ddp3 supply current for lvdsh pads in lvds mode i ddp3lvdsh cc --16 ma sum of external and adc supply currents (incl. i extflex + i ddm + i extlvdsm ) i extrail cc - - 98 ma real power pattern sum of i ext and i flex supply current without pad activity i ext/flex cc - - 16 ma real power pattern; porst output inactive. i ext supply current for lvdsm pads in lvds mode i extlvdsm cc --20 5) ma real power pattern i ddm supply current i ddm cc - - 62 ma real power pattern; sum of currents of dsadc and vadc modules - - 52 ma current for dsadc module only; 50% dsadc channels active. - - 100 6) ma max power pattern; all dsadc channels active 100% time. - - 10 ma real pattern; current for vadc only --20 7) ma max power pattern; all vadc converters are active 100% time sum of all currents (incl. i extrail + i ddx3rail + i dd ) i ddtot cc - - 770 ma real power pattern; valid for feature package t, tp, and tc products - - 840 ma real power pattern; valid for feature package ta, tb, tx, and ty products table 3-34 power supply (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower supply current data sheet 3-365 v 1.1 2015-05 sum of all currents with dc- dc evr13 regulator active 8) i ddtotdc3 cc - - 460 ma real power pattern; v ext = 3.3 v sum of all currents with dc- dc evr13 regulator active 8) i ddtotdc5 cc - - 370 ma real power pattern; v ext = 5 v sum of all currents (standby mode) i evrsb cc - - 150 9) a standby ram is active. power to remaining domains switched off. t j = 25 c ; v evrsb = 5 v sum of all currents (sleep mode) i sleep cc - - 24 ma all cpus in idle, all peripherals in sleep, f sri/spb = 1 mhz via lpdiv divider; t j = 25 c ; valid for feature package t, tp, and tc products - - 26 ma all cpus in idle, all peripherals in sleep, f sri/spb = 1 mhz via lpdiv divider; t j = 25 c ; valid for feature package ta, tb, tx, and ty products maximum power dissipation pd cc - - 2382 mw max power pattern ; valid for feature package ta and tb products - - 2140 mw max power pattern. valid for feature package t, tp, and tc products - - 2350 mw max power pattern. valid for feature package tx and ty products - - 1600 mw real power pattern. valid for feature package t, tp, and tc products - - 1700 mw real power pattern. valid for feature package ta, tb, tx, and ty products 1) in case evr33 is not used, inje ction current into 3.3v vddp3 supply rail with active sink on 5v vext rail should be limited to 500 ma if during power sequencing 3.3v is supplied before 5v by external regulator. table 3-34 power supply (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower supply current data sheet 3-366 v 1.1 2015-05 3.13.1 calculating the 1.3 v current consumption the current consumption of the 1. 3 v rail compose out of two parts: ? static curren t consumption ? dynamic current consumption the static current consumption is re lated to the device temperature t j and the dynamic current consumption depends of the configured clocking frequencies and the software applicati on executed. these two parts needs to be added in order to get the rail current consumption. valid for feature package t, tp, and tc products: (3.2) (3.3) valid for feature package ta, tb, tx, and ty products: (3.4) (3.5) 2) realistic pflash read pattern with 70% pflash bandwidth utlilization and a code mix of 50% 0s and 50% 1s. a common decoupling capacitor of atleast 100nf for ( v ddfl3 + v ddp3 ) is used. dflash read current is also included. flash read current is predominantly drawn from v ddfl3 pin and a minor part drawn from the neighbouring v ddp3 pin. 3) continuous dflash programming in burst mode with 3.3 v supply and realistic pflash read acce ss in parallel. erase currents of the corresponding flash modules are less t han the respective programming currents at v ddp3 pin. programming and erasing flash may generate transient current spikes of up to x ma for maximum x us which is handled by the decoupling and buffer capacitors. this parameter is relevant for external power supply dimensioning and not for thermal considerations. 4) in addition to the current specified, upto 4 ma is additionally drawn at v ext supply in burst programming mode with 5v external supply. erase currents of the corresponding flash mo dules are less than the respective programming currents at v ddp3 supply. this parameter is relevant for external power supply dimensioning and not for thermal considerations. 5) the current consumption is for 2 pairs of lvdsm differential p ads (8 pins). a single pair of lvdsm differential pads (4 pins) consumes 7 ma. 6) the current consumption is for 6 ds channels with standard performance (mcfg=11b). a single ds channel instance consumes 6-8 ma. 7) a single converter instance of vadc unit consumes 2 ma. 8) the total current drawn from external regulator is estimated with 72% evr13 smps regulator efficiency. i ddtotdc x is calculated from i ddtot using the scaled core current [( i dd x v dd )/(vinxefficiency)] and constitu tes all other rail currents and i ddm . 9) sum of all currents during run mode at v evrsb supply pin is less than 8 ma. it is recommended to have atleast 100 nf decoupling capacitor at this pin. i 0 0 894 ma c -------- - , e 00289 , t j c [] = i 0 4 319 ma c -------- - , e 00259 , t j c [] = i 0 2 731 ma c -------- - , e 00244 , t j c [] = i 0 5 832 ma c -------- - , e 00257 , t j c [] = tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower supply current data sheet 3-367 v 1.1 2015-05 function 2 / 4 defines the typical stat ic current consumption a nd function 3 / 5 defines the maximum static current consumption. both functions are valid for v dd =1.326v. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-368 v 1.1 2015-05 3.14 power-up a nd power-down 3.14.1 external supply mode 5 v & 1.3 v supplies are externally supplied. 3.3v is generated internally by evr33. ? external supplies vext and vdd may ramp-up or ramp-down in dependent of each other with regard s to start, rise and fall time(s). voltage ramp-up from a residual threshold (eg : up to 1 v) should also lead to a normal startup of the device. ? the rate at which current is drawn from the external regulator (diext /dt or didd /dt) is limited in the start-up phase to a maximum of 50 ma/100 us. ? porst is active/asserted when either porst ( input) or porst (output) is active/asserted. ? porst (input) active means that the reset is held active by external ag ents by pulling the porst pin low. it is recommended to keep the porst (input) asserted until all the external supplies are above their primary reset thresholds. ? porst (output) active means that c asserts the re set internally and drives the porst pin low thus propagating the reset to external devices. the porst (ou tput) is asserted by the c when atleast one among the three supply domains (1.3 v, 3.3 v or 5 v) viol ate their primary under-voltage reset thresholds.the porst (output) is deasserted by the c when all supp lies are above their primary reset thresholds and the basic supply and clock infrastructure is available. ? the power sequence as shown in figure 3-4 is enumerated below ? t1 refers to the point in time when basic supply and cl ock infrastructure is available as the external supplies ramp up. the supply mode is evaluated based on th e hwcfg [0:2] pins and consequently a soft start of evr33 regulator is initiated. ? t2 refers to the point in time when all supplies are above their primary reset thresholds. evr33 regulator has ramped up. porst (output) is deasserted and hwcf g [0:7] pins are latched on porst rising edge. firmware execution is initiated. ? t3 refers to the point in time when firmware execution is completed. user code execution starts with a default frequency of 100 mhz. ? t4 refers to the point in time du ring the ramp-down phase when atleast one of the externally provided or generated supplies (1.3 v, 3.3 v or 5 v) drop below their respective primary under-voltage reset thresholds. please note that there is no special requirements for porst slew rates. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-369 v 1.1 2015-05 figure 3-4 external supply mode - 5 v and 1.3 v externally supplied v ext (externally supplied ) evr33 ramp-up phase porst (output ) t0 1 t1 2 t2 0 v 0 5.0 v 2. 97 v pr im ar y reset thr eshold 3 t3 firmware execution basic supply & clock infrastructure porst ( input ) user code execution 0 v 1.30 v v dd (externally supplied ) 1. 17 v pr im ar y reset thr eshold 5.5 v 4.5 v 1. 33 v power ramp-down phase 4 f cpu = 100 m hz default on firmware exit t4 startup_diag_1 v 0.1 0 v 3.30 v 3. 63 v 2. 97 v v ddp3 ( inter nally gener ated by evr33 ) pr im ar y reset thr eshold tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-370 v 1.1 2015-05 3.14.2 single supply mode 5 v single supply mode. 1.3 v & 3.3 v are generated internally by evr13 & evr33. ? the rate at which current is drawn from the external regu lator (diext /dt) is limited in the start-up phase to a maximum of 50 ma/100 us. ? porst is active/asserted when either porst ( input) or porst (output) is active/asserted. ? porst (input) active means that the reset is held active by external ag ents by pulling the porst pin low. it is recommended to keep the porst (input) asserted until th e external supply is above the respective primary reset threshold. ? porst (output) active means that c asserts the re set internally and drives the porst pin low thus propagating the reset to external devices. the porst (ou tput) is asserted by the c when atleast one among the three supply domains (1.3 v, 3.3 v or 5 v) viol ate their primary under-voltage reset thresholds.the porst (output) is deasserted by the c when all supp lies are above their primary reset thresholds and the basic supply and clock infrastructure is available. ? the power sequence as shown in figure 3-5 is enumerated below ? t1 refers to the point in time when basic supply and cl ock infrastructure is available as the external supply ramps up. the supply mode is evaluated based on the hwcfg [0:2] pins and consequently a soft start of evr13 and evr33 regulators are initiated. ? t2 refers to the point in time w hen all supplies are above their primary reset thresholds. evr13 and evr33 regulators have ramped up. porst (output) is deasserted and hwcfg [0:7] pins are latched on porst rising edge. firmware execution is initiated. ? t3 refers to the point in time when firmware execution is completed. user code execution starts with a default frequency of 100 mhz. ? t4 refers to the point in time du ring the ramp-down phase when atleast one of the externally provided or generated supplies (1.3 v, 3.3 v or 5 v) drop below their respective primary under-voltage reset thresholds. please note that there is no special requirements for porst slew rates. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-371 v 1.1 2015-05 figure 3-5 single supply mode - 5 v single supply v ext (externally supplied ) evr13 & evr 33 ram p-up phase t0 1 t1 2 t2 0 v 0 5.0 v 2. 97 v pr im ar y reset thr eshold 3 t3 firmware execution basic supply & clock infrastructure user code execution 0 v 1.30 v v d d ( inter nally gener ated by evr13 ) 1. 17 v pr im ar y reset thr eshold 5.5 v 4.5 v 1. 33 v power ramp - down phase 4 f cpu = 100 m hz default on firmware exit t4 startup_diag_2 v 0.1 0 v 3.30 v 3. 63 v 2. 97 v v ddp3 ( inter nally gener ated by evr33 ) pr im ar y reset thr eshold porst (output ) porst ( input ) tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-372 v 1.1 2015-05 3.14.3 external supply mode all supplies, namely 5 v, 3.3 v & 1.3 v, are externally supplied. ? external supplies vext ,, vddp3 & vdd may ramp-up or ramp-down indep endent of each ot her with regards to start, rise and fall time(s). ? the rate at which current is drawn from the external re gulator (diext /dt, didd /dt or diddp3 /dt) is limited in the start-up phase to a maximum of 50 ma/100 us. ? porst is active/asserted when either porst ( input) or porst (output) is active/asserted. ? porst (input) active means that the reset is held active by external ag ents by pulling the porst pin low. it is recommended to keep the porst (input) asserted until all the external supplies are above their primary reset thresholds. ? porst (output) active means that c asserts the re set internally and drives the porst pin low thus propagating the reset to external devices. the porst (ou tput) is asserted by the c when atleast one among the three supply domains (1.3 v, 3.3 v or 5 v) viol ate their primary under-voltage reset thresholds.the porst (output) is deasserted by the c when all supp lies are above their primary reset thresholds and the basic supply and clock infrastructure is available. ? the power sequence as shown in figure 3-6 is enumerated below ? t1 refers to the point in time when all supplies are above their primary reset thresholds and basic clock infrastructure is available. the supply mode is ev aluated based on the hwcfg [0:2] pins. porst (output) is deasserted and hwcfg [0:7] pins are latched on po rst rising edge. firmware execution is initiated. ? t2 refers to the point in time when firmware execution is completed. user code execution starts with a default frequency of 100 mhz. ? t3 refers to the po int in time during the ramp-down phase wh en atleast one of the externally provided supplies (1.3 v, 3.3 v or 5 v) drop below their respective primary under-voltage reset thresholds. please note that there is no special requirements for porst slew rates. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-373 v 1.1 2015-05 figure 3-6 external supply mode - 5 v, 3.3 v & 1.3 v externally supplied v ext (externally supplied ) t0 1 0 v 0 5.0 v 2. 97 v pr im ar y reset thr eshold 2 t2 firmware execution basic supply & clock infrastructure user code execution 0 v 1.30 v v dd (exter nally supplied ) 1. 17 v pr im ar y reset thr eshold 5.5 v 4.5 v 1. 33 v power ramp - down phase 3 f cpu =100 m hz default on firmware exit t3 startup_diag_3 v 0.1 0 v 3.30 v 3. 63 v 2. 97 v v ddp3 ( exter nally supplied ) pr im ar y reset thr eshold porst (output ) porst ( input ) t1 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-374 v 1.1 2015-05 3.14.4 single supply mode 3.3 v single supply mode. 1.3 v is generated internally by evr13. ? the rate at which current is drawn from the external regu lator (diext /dt) is limited in the start-up phase to a maximum of 50 ma/100 us. ? porst is active/asserted when either porst ( input) or porst (output) is active/asserted. ? porst (input) active means that the reset is held active by external ag ents by pulling the porst pin low. it is recommended to keep the porst (input) asserted until th e external supply is above the respective primary reset threshold. ? porst (output) active means that c asserts the re set internally and drives the porst pin low thus propagating the reset to external devices. the porst (ou tput) is asserted by the c when atleast one among the three supply domains (1.3 v or 3.3 v) violate their primary under-voltage reset thresholds.the porst (output) is deasserted by the c when all supp lies are above their primary reset thresholds and the basic supply and clock infrastructure is available. ? the power sequence as shown in figure 3-7 is enumerated below ? t1 refers to the point in time when basic supply and cl ock infrastructure is available as the external supply ramps up. the supply mode is evaluated based on the hwcfg [0:2] pins and consequently a soft start of evr13 regulator is initiated. ? t2 refers to the point in time when all supplies are above their primary reset thresholds. evr13 regulator has ramped up. porst (output) is deasserted and hwcf g [0:7] pins are latched on porst rising edge. firmware execution is initiated. ? t3 refers to the point in time when firmware execution is completed. user code execution starts with a default frequency of 100 mhz. ? t4 refers to the point in time du ring the ramp-down phase when atleast one of the externally provided or generated supplies (1.3 v or 3.3 v) drop below their respective primary under-voltage reset thresholds. please note that there is no special requirements for porst slew rates. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpower-up and power-down data sheet 3-375 v 1.1 2015-05 figure 3-7 single supply mo de - 3.3 v single supply evr13 ramp-up phase t0 1 t1 2 t2 0 3 t3 firmware execution basic supply & clock infrastructure user code execution 0 v 1.30 v v dd ( inter nally gener ated by evr 13) 1. 17 v pr im ar y reset thr eshold 1. 33 v power ramp - down phase 4 f cpu = 100 m hz default on firmware exit t4 startup_diag_4 v 0.1 porst (output ) porst ( input ) 0 v 3.30 v 3. 63 v 2. 97 v v ddp3 ( exter nally supplied ) pr im ar y reset thr eshold v ext (exter nally supplied ) & tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationreset timing data sheet 3-376 v 1.1 2015-05 3.15 reset timing table 3-35 reset timings parameter symbol values unit note / test condition min. typ. max. application reset boot time 1) 1) the duration of the boot time is defined between the rising edge of the internal application reset and the clock cycle when the first user instruction has entered th e cpu pipeline and its processing starts. t b cc - - 350 2) 2) the timing values assumes programmed bmi with esr0cnt inactive. s operating with max. frequencies. system reset boot time t bs cc - - 1 ms power on reset boot time 3) 3) the duration of the boot time is defined by all external supply voltages are inside there operation condictions and the clock cycle when the first user instruction has enter ed the cpu pipel ine and its processing starts. t bp cc - - 2.5 2) ms dv/dt =1 v/ms . including evr ramp- up and firmware execution time - - 1.11 2) ms firmware execution time; without evr operation (external supply only) minimum porst hold time incase of power fail event issued by evr primary monitor t evrpor cc 10 - - s evr start-up or ramp-up time t evrstartup cc --1 ms dv/dt =1 v/ms . evr13 and evr33 active minimum porst active hold time after powe r supplies are stable at operating levels 4) t poa cc 1 - - ms configurable porst digital filter delay in addition to analog pad filter delay t porstdf cc 600 - 1200 ns hwcfg pins hold time from esr0 rising edge t hdh cc 16 / f spb --ns hwcfg pins setup time to esr0 rising edge t hds cc 0 - - ns ports inactive after esr0 reset active t pi cc - - 8/ f spb ns ports inactive after porst reset active 5) t pip cc - - 150 ns hold time from porst rising edge t poh sr 150 - - ns setup time to porst rising edge t pos sr 0 - - ns tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationreset timing data sheet 3-377 v 1.1 2015-05 figure 3-8 power, pad and reset timing 4) the regulator that supplies v ext should ensure that v ext is in the operational region bef ore porst is externally released by the regulator. incase of 5v nomina l supply, it should be ensured that v ext > 4v before porst is released. incase of 3.3v nominal supply , it should be ensured that v ext > 3v before porst is released. the additional minimum porst hold time is required as an additional mechanism to avoid consecut ive porst toggling owing to slow supply slopes or residual supply ramp-ups. it is also required to activate external porst atleast 100us before power-fail is recognised to avoid consecutive porst toggling on a power fail event. 5) this parameter includes the delay of the analog spike filter in the porst pad. reset_beh_aurix vddp porst pads pad- state undefined vdd v ddppa v ddppa pad- state undefined v ddpr programmed z / h tristate z / pullup h t poa t poa hwcfg esr0 t pip z / h cold warm t hdh testmode t pos t poh t pos t poh trst t pi programmed programmed t pi power -on config t hda t hdh config t hda t hdh config tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationevr data sheet 3-378 v 1.1 2015-05 3.16 evr table 3-36 3.3v parameter symbol values unit note / test condition min. typ. max. input voltage range 1) 1) a maximum pass device dropout voltage of 700mv is includ ed in the minimum input voltage to ensure optimal pass device operation. v in sr - - 5.50 v pass device=off chip 4 - 5.50 v pass device=on chip output voltage operational range including load/line regulation and aging incase of ldo regulator v out cc 2.97 3.3 3.63 v pass device=off chip 2.97 3.3 3.63 v pass device=on chip output v ddx3 static voltage accuracy after trimming and aging without dynamic load/line regulation incase of ldo regulator. v outt cc 3.225 3.3 3.375 v pass device=off chip 3.225 3.3 3.375 v pass device=on chip output buffer capacitance on v out 2) c out cc - 2.2 - f pass device=off chip - 2.2 - f pass device=on chip primary undervoltage reset threshold for v ddx3 3) v rst33 cc - - 3.0 v by reset release before evr trimming on supply ramp-up. startup time t str cc - - 1000 s pass device=off chip - - 1000 s pass device=on chip external v in supply ramp 4) dvin/dt sr - 1 50 v/ms pass device=off chip - 1 50 v/ms pass device=on chip load step response dvout/diout cc - - 240 mv di =-100 ma ; tsettle =20 s ; pass device=off chip - - 240 mv di =-70 ma /20 ns ; tsettle =20 us ; pass device=on chip -240 - - mv di =100 ma ; tsettle =20 s ; pass device=off chip -240 - - mv di =50 ma /20 ns ; tsettle =20 us ; pass device=on chip line step response dvout/dvin cc -20 - 20 mv dv/dt =1 v/ms ; pass device=off chip -20 - 20 mv dv/dt =1 v/ms ; pass device=on chip tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationevr data sheet 3-379 v 1.1 2015-05 2) it is recommended to select a capacitor with esr less than 50 mohm (0.5mhz - 10 mhz). it is also recommended that the resistance of the supply trace from the pin to the evr output capacitor is less than 100 mohm. 3) the reset release on supply ramp-up is delayed by a time dur ation 20-40 us after reaching undervoltage reset threshold. this serves as a time hysteresis to avoid multiple cons ecutive cold porst events during slow supply ramp-ups owing to voltage drop/current jumps when reset is released. the reset limit of 2,97v at pin is fo r the case with 3.3v generated internally from evr33. in case the 3.3v supply is provided externally, the bondwire drop will cause a reset at a higher voltage of 3.0v at the v ddp3 pin. 4) evr robust against residual voltage ramp-up starting between 0-1 v. table 3-37 1.3v parameter symbol values unit note / test condition min. typ. max. input voltage range 1) 1) a maximum pass device dropout voltage of 700mv is includ ed in the minimum input voltage to ensure optimal pass device operation. v in sr 2.97 - 5.5 v pass device=off chip output voltage operational range including load/line regulation and aging incase of ldo regulator v out cc 1.17 1.3 1.43 v pass device=off chip output v dd static voltage accuracy after trimming without dynamic load/line regulation with aging incase of ldo regulator. v outt cc 1.275 1.3 1.325 v pass device=off chip output buffer capacitance on v out 2) 2) it is recommended to select a capacitor with esr less than 50 mohm (0.5mhz - 10 mhz). it is also recommended that the resistance of the supply trace from the pin to the evr output capacitor is less than 100 mohm. c out cc 3 4.7 6.3 f pass device=off chip primary undervoltage reset threshold for v dd 3) 3) the reset release on supply ramp-up is delayed by a time dur ation 30-60 s after reaching undervoltage reset threshold. this serves as a time hysteresis to avoid multiple cons ecutive cold porst events during slow supply ramp-ups owing to voltage drop/current jumps when reset is released. v rst13 cc - - 1.17 v by reset release before evr trimming on supply ramp-up. pass device=off chip startup time t str cc - - 1000 s pass device=off chip external v in supply ramp 4) 4) evr robust against residual voltage ramp-up starting between 0-1 v. dvin/dt sr - 1 50 v/ms pass device=off chip load step response dvout/diout cc - - 100 mv di =-150 ma ; tsettle =20 s ; pass device=off chip -100 - - mv di =100 ma ; tsettle =20 s ; pass device=off chip line step response dvout/dvin cc -10 - 10 mv dv/dt =1 v/ms ; pass device=off chip tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationevr data sheet 3-380 v 1.1 2015-05 table 3-38 supply monitoring parameter symbol values unit note / test condition min. typ. max. v ext primary undervoltage monitor accuracy after trimming 1) 1) the monitor tolerances constitute the inherent variation of the bandgap and adc over process, voltage and temperature operational ranges. the xxxpriuv parameters are device indi vidually tested in production with 1% tolerance about the min and max xxxpriuv limits. v extpriuv sr 2.86 2.92 2.97 v v ext = undervoltage reset threshold v ddp3 primary undervoltage monitor accuracy after trimming 1) v ddp3priuv sr 2.86 2.90 2.97 v v ddp3 = undervoltage reset threshold v dd primary undervoltage monitor accuracy after trimming 1) v ddpriuv sr 1.13 1.15 1.17 v v dd = undervoltage reset threshold v ext secondary supply monitor accuracy v extmon cc 4.9 5.0 5.1 v swdxxval v ext monitoring threshold=5v=da h v ddp3 secondary supply monitor accuracy v ddp3mon cc 3.23 3.30 3.37 v evr33xxval v ddp3 monitoring threshold=3.3v=90 h v dd secondary supply monitor accuracy v ddmon cc 1.27 1.30 1.33 v evr13xxval v dd monitoring threshold=1.3v=df h evr primary and secondary monitor measurement latency for a new supply value t evrmon cc - - 1.8 s table 3-39 evr13 smps external components parameter symbol values unit note / test condition min. typ. max. external output capacitor value 1) c outdc sr 15.4 22 29.7 f i dddc =1a 6.5 10 13.5 f i dddc =400ma external output capacitor esr c dc_esr sr - - 50 mohm f 0.5mhz ; f 10mhz - - 100 ohm f =10hz external input capacitor value 1) c in sr 6.5 10 13.5 f i dddc =1a 4.42 6.8 9.18 f i dddc =400ma external input capacitor esr c in_esr sr - - 50 mohm f 0.5mhz ; f 10mhz - - 100 ohm f =100hz external inductor value 2) l dc sr 2.31 3.3 4.29 h f dcdc =1.5mhz 3.29 4.7 6.11 h f dcdc =1mhz external inductor esr l dc_esr sr - - 0.2 ohm p + n-channel mosfet logic level v ll sr - - 2.5 v tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationevr data sheet 3-381 v 1.1 2015-05 p + n-channel mosfet drain source breakdown voltage |v br_ds | sr - - 7 v p + n-channel mosfet drain source on-state resistance r on sr - - 150 mohm i dddc =1a; v gs =2.5 v ; t a =25 c - - 200 mohm i dddc =400ma; v gs =2.5 v ; t a =25 c p + n-channel mosfet gate charge q ac sr-4-nc i dddc =1a; mos- v gs =5v -8-nc i dddc =400ma; mos- v gs =5v external mosfet commutation time t c sr 10 30 40 ns configurable n-channel mosfet reverse diode forward voltage v rdn sr-0.8-v 1) capacitor min-max range represent typical 35% tolerance including dc bias effect. the trace resistance from the capacitor to the supply or ground rail should be limited to 25 mohm. 2) external inductor min-max range represent typical 30% tolerance at a dc bias current of 100ma. table 3-40 evr13 smps parameter symbol values unit note / test condition min. typ. max. input v ddp3 voltage range v in cc 2.97 - 3.63 v input v ext voltage range v in sr 2.97 - 5.5 v smps regulator output voltage range including load/line regulation and aging 1) v dddc cc 1.17 - 1.43 v v dd 2.97v ; v dd 5.5v ; i dddc 1ma ; i dddc 1a smps regulator static voltage output accuracy after trimming without dynamic load/line regulation with aging. 2) v dddct cc 1.275 1.3 1.325 v v dd 2.97v ; v dd 5.5v ; i dddc 1ma ; i dddc 1a programmable switching frequency f dcdc cc 0.4 - 2.0 mhz switching frequency modulation spread ? f dcspr cc - - 2% mhz maximum ripple at i max (peak- to-peak) 3) ? v dddc cc - - 15 mv v dd 2.97v ; v dd 5.5v ; i dddc 300ma ; i dddc 1a no load current consumption of smps regulator i dcnl cc - 5 10 ma f dcdc =1 mhz table 3-39 evr13 smps external components (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationevr data sheet 3-382 v 1.1 2015-05 smps regulator load transient response dvout/diout cc -25 - 25 mv di < 200 ma ; f dcdc =1 mhz ; t r =0.1s; t f =0.1s; v dddc =1.3v -65 - 65 mv di < 400 ma ; f dcdc =1 mhz ; t r =0.1s; t f =0.1s; v dddc =1.3v -130 - 130 mv di < 700 ma ; f dcdc =1 mhz ; t r =0.1s; t f =0.1s; v dddc =1.3v maximum output current of the regulator i max sr - - 1 a limited by thermal constraints and component choice smps regulator efficiency n dc cc - 85 - % v in =3.3 v ; i dddc =300 ma ; f dcdc =1 mhz -75-% v in =5 v ; i dddc =400 ma ; f dcdc =1.5 mhz -80-% v in =5 v ; i dddc =400 ma ; f dcdc =1 mhz 1) incase of smps mode, it shall be ensured that the v dd output pin shall be connected on pcb level to all other v dd input pins. 2) incase of f sri running with max frequency, it shall be ensured that the v dd operating range is limited to 1.235v upto 1.430v. the dcdc may be configured in this case with a nominal volt age of 1.33v7.5%. the stat ic accuracy and regulation parameter ranges remain al so valid for this case. 3) if frequency spreading (sdfreqsprd = 1) is activated, an additional ripple of 1% need to be considered. table 3-40 evr13 smps (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationphase locked loop (pll) data sheet 3-383 v 1.1 2015-05 3.17 phase locked loop (pll) note: the specified pll jitter values are valid if the capacitive load per pin does not exceed c l = 20 pf with the maximum driver and sharp edge. note: the maximum peak-to-peak noise on the power supply voltage, is limited to a peak-to-peak voltage of v pp = 100 mv for noise frequencies below 300 khz and v pp = 40 mv for noise frequencies above 300 khz. these conditions can be achieved by appropriate blocki ng of the supply voltage as near as possible to the supply pins and using pcb supply and ground planes. table 3-41 pll parameter symbol values unit note / test condition min. typ. max. pll base frequency f pllbase cc 80 150 360 mhz vco frequency range f vco sr 400 - 800 mhz vco input frequency range f ref cc 8 - 24 mhz modulation amplitude ma cc 0 - 2 % peak period jitter dp cc -200 - 200 ps peak accumulated jitter d pp cc -5 - 5 ns without modulation total long term jitter j tot cc - - 11.5 ns including modulation; ma 1% system frequency deviation f sysd cc - - 0.01 % with active modulation modulation variation frequency f mv cc 2 3.6 5.4 mhz pll lock-in time t l cc 11.5 - 200 s tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationeray phase locked loop (eray_pll) data sheet 3-384 v 1.1 2015-05 3.18 eray phase locked loop (eray_pll) note: the specified pll jitter values are valid if the capacitive load per pin does not exceed c l = 20 pf with the maximum driver and sharp edge. note: the maximum peak-to-peak noise on the power supply voltage, is limited to a peak-to-peak voltage of v pp = 100 mv for noise frequencies below 300 khz and v pp = 40 mv for noise frequencies above 300 khz. these conditions can be achieved by appropriate blocki ng of the supply voltage as near as possible to the supply pins and using pcb supply and ground planes. table 3-42 pll_eray parameter symbol values unit note / test condition min. typ. max. pll base frequency of the eray pll f pllbase_era y cc 50 200 320 mhz vco frequency range of the eray pll f vco_eray sr 400 - 480 mhz vco input frequency of the eray pll f ref sr 16 - 24 mhz accumulated_jitter d p cc -0.5 - 0.5 ns accumulated jitter at sysclk pin d pp cc -0.8 - 0.8 ns pll lock-in time t l cc 5.6 - 200 s tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationac specifications data sheet 3-385 v 1.1 2015-05 3.19 ac specifications all ac parameters are specified for the complette operating range defined in chapter 3.4 unless otherwise noted in colum note / test condition. unless otherwise noted in the figures the timings are defined with the following guidelines: figure 3-9 definition of rise / fall times figure 3-10 time reference point definition 10 % 90% 10 % 90% v ss v ext/fl ex /v ddp3 t r rise_fall t f timing_reference v ext/fl ex /v ddp3 timing reference points v ext /fl ex /v ddp3 v ss v ext/fl ex /v ddp3 22 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationjtag parameters data sheet 3-386 v 1.1 2015-05 3.20 jtag parameters the following parameters are applicable for communication through the jtag debug interface. the jtag module is fully compliant with ieee1149.1-2000. figure 3-11 test clock timing (tck) table 3-43 jtag parameter symbol values unit note / test condition min. typ. max. tck clock period t 1 sr 25 - - ns tck high time t 2 sr 10 - - ns tck low time t 3 sr 10 - - ns tck clock rise time t 4 sr - - 4 ns tck clock fall time t 5 sr - - 4 ns tdi/tms setup to tck rising edge t 6 sr 6.0 - - ns tdi/tms hold after tck rising edge t 7 sr 6.0 - - ns tdo valid after tck falling edge (propagation delay) 1) 1) the falling edge on tck is used to generate the tdo timing. t 8 cc 3.0 - - ns c l 20pf --16.5 ns c l 50pf tdo hold after tck falling edge 1) t 18 cc 2 - - ns tdo high impedance to valid from tck falling edge 1)2) 2) the setup time for tdo is given implicitly by the tck cycle time. t 9 cc - - 17.5 ns c l 50pf tdo valid output to high impedance from tck falling edge 1) t 10 cc - - 17.5 ns c l 50pf mc_jtag_tck 0.9 v ddp 0.5 v ddp t 1 t 2 t 3 0.1 v ddp t 5 t 4 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationjtag parameters data sheet 3-387 v 1.1 2015-05 figure 3-12 jtag timing t 6 t 7 t 6 t 7 t 9 t 8 t 10 tck tms tdi tdo mc_jtag t 18 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationdap parameters data sheet 3-388 v 1.1 2015-05 3.21 dap parameters the following parameters are applicable for communication through the dap debug interface. figure 3-13 test clock timing (dap0) figure 3-14 dap timing host to device table 3-44 dap parameter symbol values unit note / test condition min. typ. max. dap0 clock period t 11 sr 6.25 - - ns dap0 high time t 12 sr 2 - - ns dap0 low time t 13 sr 2 - - ns dap0 clock rise time t 14 sr - - 1 ns f =160mhz --2 ns f =80mhz dap0 clock fall time t 15 sr - - 1 ns f =160mhz --2 ns f =80mhz dap1 setup to dap0 rising edge t 16 sr 4 - - ns dap1 hold after dap0 rising edge t 17 sr 2 - - ns dap1 valid per dap0 clock period 1) 1) the host has to find a suitable sampling point by analyzing the sync telegram response. t 19 cc 3 - - ns c l =20pf ; f =160mhz 8 - - ns c l =20pf ; f =80mhz 10 - - ns c l =50pf ; f =40mhz mc_dap0 0.9 v ddp 0.5 v ddp t 11 t 12 t 13 0.1 v ddp t 15 t 14 t 16 t 17 dap0 dap1 mc_ dap1_rx tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationdap parameters data sheet 3-389 v 1.1 2015-05 figure 3-15 dap timing device to host (dap1 and dap2 pins) note: the dap1 and dap2 device to host timing is indi vidual for both pins. there is no guaranteed max. signal skew. dap1 mc_ dap1_tx t 11 t 19 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-390 v 1.1 2015-05 3.22 asclin spi master timing this section defines the timings for the asclin in th e tc290 / TC297 / tc298 / tc299, for 5v power supply. note: pad asymmetry is already in cluded in the following timings. table 3-45 master mode mp+ss/mprss output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 20 - - ns c l =25pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -3 - 3 ns 0 < c l < 50pf mtsr delay from asclko shifting edge t 51 cc -7 - 6 ns c l =25pf aslson delay from the first asclko edge t 510 cc 5 - 35 ns c l =25pf; pad used = lpm mrst setup to asclko latching edge t 52 sr 30 - - ns c l =25pf mrst hold from asclko latching edge t 53 sr -4.5 - - ns c l =25pf table 3-46 master mode mp+sm/mprsm output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 50 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -2 - 3+0.01 * c l ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -10 - 10 ns c l =50pf aslson delay from the first asclko edge t 510 cc 5 - 35 ns c l =50pf; pad used = lpm mrst setup to asclko latching edge t 52 sr 50 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -9 - - ns c l =50pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-391 v 1.1 2015-05 table 3-47 master mode mpss output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 20 - - ns c l =25pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -2 - 3.5+0.035 * c l ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -7 - 6 ns c l =25pf aslson delay from the first asclko edge t 510 cc -7 - 6 ns c l =25pf mrst setup to asclko latching edge t 52 sr 31 - - ns c l =25pf, else 33 3) 3) please note that these pins didn't s upport the hystereses inactive feature. --ns c l =25pf, for p14.2, p14.4, and p15.1 mrst hold from asclko latching edge t 53 sr -5 - - ns c l =25pf table 3-48 master mode mpsm output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 100 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -3 - 4+0.04 * c l ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -11 - 10 ns c l =50pf aslson delay from the first asclko edge t 510 cc -11 - 10 ns c l =50pf mrst setup to asclko latching edge t 52 sr 60 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -10 - - ns c l =50pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-392 v 1.1 2015-05 table 3-49 master mode medium output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 200 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -8 - 4+0.06 * c l ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -20 - 18.5 ns c l =50pf aslson delay from the first asclko edge t 510 cc -20 - 20 ns c l =50pf mrst setup to asclko latching edge t 52 sr 70 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -10 - - ns c l =50pf table 3-50 master mode weak output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 1000 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -30 - 30+0.15 * c l ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -75 - 75 ns c l =50pf aslson delay from the first asclko edge t 510 cc -65 - 65 ns c l =50pf mrst setup to asclko latching edge t 52 sr 510 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -50 - - ns c l =50pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-393 v 1.1 2015-05 figure 3-16 asclin spi master timing asclin_tmgmm.vsd asclko mtsr t 51 t 51 mrst t 53 data valid aslso t 510 t 50 t 500 t 52 data valid tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-394 v 1.1 2015-05 3.23 asclin spi master timing this section defines the timings for the asclin in the tc290 / TC297 / tc298 / tc29 9, for 3.3v power supply, medium performance pads, strong sharp edge (mpss), c l =25pf. note: pad asymmetry is already in cluded in the following timings. table 3-51 master mode mp+ss/mprss output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 40 - - ns c l =25pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -5 - 5 ns 0 < c l < 50pf mtsr delay from asclko shifting edge t 51 cc -12 - 12 ns c l =25pf aslson delay from the first asclko edge t 510 cc 0 - 60 ns c l =25pf; pad used = lpm mrst setup to asclko latching edge t 52 sr 50 - - ns c l =25pf mrst hold from asclko latching edge t 53 sr -5 - - ns c l =25pf table 3-52 master mode mp+sm/mprsm output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 100 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -3 - 7 ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -17 - 17 ns c l =50pf aslson delay from the first asclko edge t 510 cc 0 - 60 ns c l =50pf; pad used = lpm mrst setup to asclko latching edge t 52 sr 85 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -5 - - ns c l =50pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-395 v 1.1 2015-05 table 3-53 master mode mpss output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 40 - - ns c l =25pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -5 - 7+0.07 * c l ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -12 - 12 ns c l =25pf aslson delay from the first asclko edge t 510 cc -12 - 12 ns c l =25pf mrst setup to asclko latching edge t 52 sr 50 - - ns c l =25pf mrst hold from asclko latching edge t 53 sr -5 - - ns c l =25pf table 3-54 master mode mpsm output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 200 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -5 - 9+0.06 * c l ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -19 - 17 ns c l =50pf aslson delay from the first asclko edge t 510 cc -19 - 17 ns c l =50pf mrst setup to asclko latching edge t 52 sr 100 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -13 - - ns c l =50pf table 3-55 master mode medium output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) t 50 cc 400 - - ns c l =50pf deviation from ideal duty cycle 2) t 500 cc -6-0.07 * c l -6+0.07 * c l ns 0 < c l < 200pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-396 v 1.1 2015-05 mtsr delay from asclko shifting edge t 51 cc -33 - 25 ns c l =50pf aslson delay from the first asclko edge t 510 cc -35 - 35 ns c l =50pf mrst setup to asclko latching edge t 52 sr 120 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -13 - - ns c l =50pf 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. table 3-56 master mode weak output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 2000 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -110 - 150 ns 0 < c l < 200pf mtsr delay from asclko shifting edge t 51 cc -170 - 170 ns c l =50pf aslson delay from the first asclko edge t 510 cc -170 - 170 ns c l =50pf mrst setup to asclko latching edge t 52 sr 510 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr -40 - - ns c l =50pf table 3-57 master mode a2ss output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) t 50 cc 20 - - ns c l =50pf deviation from ideal duty cycle 2) t 500 cc -3 - 3 ns c l =50pf mtsr delay from asclko shifting edge t 51 cc -4 - 4 ns c l =50pf aslson delay from the first asclko edge t 510 cc -5 - 4 ns c l =50pf table 3-55 master mode medium output pads (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationasclin spi master timing data sheet 3-397 v 1.1 2015-05 figure 3-17 asclin spi master timing mrst setup to asclko latching edge t 52 sr 17 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr 0 - - ns c l =50pf 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. table 3-58 master mode a2sm output pads parameter symbol values unit note / test condition min. typ. max. asclko clock period 1) 1) pll jitter not included. should be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bitcon.samplepoint bitf ield with the finest granularity of t max = 1 / f max . t 50 cc 40 - - ns c l =50pf deviation from ideal duty cycle 2) 2) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -4 - 4 ns c l =50pf mtsr delay from asclko shifting edge t 51 cc -8 - 6 ns c l =50pf aslson delay from the first asclko edge t 510 cc -8 - 9 ns c l =50pf mrst setup to asclko latching edge t 52 sr 26 - - ns c l =50pf mrst hold from asclko latching edge t 53 sr 0 - - ns c l =50pf table 3-57 master mode a2ss output pads (cont?d) parameter symbol values unit note / test condition min. typ. max. asclin_tmgmm.vsd asclko mtsr t 51 t 51 mrst t 53 data valid aslso t 510 t 50 t 500 t 52 data valid tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-398 v 1.1 2015-05 3.24 qspi timings, master and slave mode this section defines the timings for the qspi in the tc 290 / TC297 / tc298 / tc299, for 5v pad power supply. it is assumed that sclko, mtsr, and sl so pads have the same pad settings: ? lvdsm output pads,lvdsh input pad, master mode, c l =25pf ? medium performance plus pads (mp+): ? strong sharp edge (mp+ss), c l =25pf ? strong medium edge (mp+sm), c l =50pf ? medium edge (mp+m), c l =50pf ? weak edge (mp+w), c l =50pf ? medium performance pads (mp): ? strong sharp edge (mpss), c l =25pf ? strong medium edge (mpsm), c l =50pf ? medium and low performance pads (mp/lp), the identical output strength settings: ? medium edge (lp/mpm), c l =50pf ? weak edge (mpw), c l =50pf table 3-59 master mode timing, lvdsm output pads for data and clock parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 20 2) 2) the capacitive load on the lvds pins is differenti al, the capacitive load on the cmos pins is single ended. --ns c l =25pf deviation from the ideal duty cycle 3) 4) 3) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 4) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -1 - 1 ns c l =25pf mtsr delay from sclko shifting edge t 51 cc -3 - 3 ns c l =25pf slson deviation from the ideal programmed position t 510 cc 0 - 30 ns c l =25pf; mpsm -5 - 7 ns c l =25pf; mpss -4 - 7 ns mp+ss; c l =25pf -1 - 15 ns mp+sm; c l =25pf mrst setup to sclk latching edge 5) 5) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 19 5) --ns c l =25pf; lvdsm 5v output and lvdsh 3.3v input mrst hold from sclk latching edge t 53 sr -6 5) --ns c l =25pf; lvdsm 5v output and lvdsh 3.3v input tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-399 v 1.1 2015-05 table 3-60 master mode mp+ss/mprss output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 20 - - ns c l =25pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -3 - 3 ns 0 < c l < 50pf mtsr delay from sclko shifting edge t 51 cc -7 - 6 ns c l =25pf slson deviation from the ideal programmed position t 510 cc -7 - 6 ns c l =25pf mrst setup to sclk latching edge 4) 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 27 4)5) 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. --ns c l =25pf mrst hold from sclk latching edge t 53 sr -4.5 4)5) --ns c l =25pf table 3-61 master mode mp+sm/mprsm output pads for data and clock parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 50 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -2 - 3+0.01 * c l ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -10 - 10 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -10 - 10 ns mp+sm; c l =50pf -13 - 1 ns mpss; c l =50pf 0 - 40 ns mp+m, mpm, lpm; c l =50pf mrst setup to sclk latching edge 4) t 52 sr 50 4)5) --ns c l =50pf mrst hold from sclk latching edge t 53 sr -9 4)5) --ns c l =50pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-400 v 1.1 2015-05 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. table 3-62 master mode timing mpss output pads for data and clock, cl=50pf parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 40 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -2 - 3.5+0.035 * c l ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -8 - 8 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -8 - 8 ns mpss; c l =50pf -1 - 15 ns mp+sm; c l =50pf 0 - 50 ns mp+m, mpm, lpm; c l =50pf mrst setup to sclk latching edge 4) 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 40 4)5) 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. --ns c l =50pf mrst hold from sclk latching edge t 53 sr -5 4)5) --ns c l =50pf table 3-63 master mode timing mpsm output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 100 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) t 500 cc -3 - 4+0.04 * c l ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -11 - 10 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -11 - 10 ns c l =50pf mrst setup to sclk latching edge 4) t 52 sr 60 4)5) --ns c l =50pf mrst hold from sclk latching edge t 53 sr -10 4)5) --ns c l =50pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-401 v 1.1 2015-05 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. table 3-64 master mode timing mprm/mp+m/mpm/lpm output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 200 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -10 - 16+0.04 * c l ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -15 - 20 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -20 - 20 ns c l =50pf mrst setup to sclk latching edge 4) 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 70 4)5) 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. --ns c l =50pf mrst hold from sclk latching edge t 53 sr -10 4)5) --ns c l =50pf table 3-65 master mode weak output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 1000 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) t 500 cc -30 - 30+0.15 * c l ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -65 - 65 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -65 - 65 ns c l =50pf mrst setup to sclk latching edge 4) t 52 sr 300 4)5) --ns c l =50pf mrst hold from sclk latching edge t 53 sr -40 4)5) --ns c l =50pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-402 v 1.1 2015-05 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. table 3-66 slave mode timing parameter symbol values unit note / test condition min. typ. max. sclk clock period t 54 sr 4 x t max --ns sclk duty cycle t 55/t54 sr 40 - 60 % mtsr setup to sclk latching edge t 56 sr 4 1) 1) except pin p15.1. - - ns hystheresis inactive 5 1) - - ns input level al 5 1) - - ns input level ttl mtsr hold from sclk latching edge t 57 sr 3.5 1) - - ns hystheresis inactive 6 1) - - ns input level al 9 1) - - ns input level ttl slsi setup to first sclk shift edge t 58 sr 5 1) - - ns hystheresis inactive 4 1) - - ns input level al 8 1) - - ns input level ttl 6 - - ns only for pin 15.1, al slsi hold from last sclk latching edge t 59 sr 3 1) - - ns hystheresis inactive 4 1) - - ns input level al 8 1) - - ns input level ttl mrst delay from sclk shift edge t 60 cc 10 - 70 ns mp+m/mprm; c l =50pf 9 - 50 ns mp+sm/mprsm; c l =50pf 5 - 30 ns mp+ss/mprss; c l =25pf 40 - 300 ns mp+w/mprw; c l =50pf 10 - 70 ns mpm/lpm; c l =50pf 10 - 55 ns mpsm; c l =50pf 5 - 30 ns mpss; c l =25pf 40 - 300 ns mpw/lpw; c l =50pf slsi to valid data on mrst t 61 sr - - 5 ns tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-403 v 1.1 2015-05 figure 3-18 master mode timing figure 3-19 slave mode timing 3.25 qspi timings, master and slave mode this section defines the timings for the qspi in the tc 290 / TC297 / tc298 / tc299, for 3.3v pad power supply. it is assumed that sclko, mtsr, and sl so pads have the same pad settings: ? lvdsm output pads,lvdsh input pad, master mode, c l =25pf ? medium performance plus pads (mp+): ? strong sharp edge (mp+ss), c l =25pf ? strong medium edge (mp+sm), c l =50pf ? medium edge (mp+m), c l =50pf ? weak edge (mp+w), c l =50pf ? medium performance pads (mp): ? strong sharp edge (mpss), c l =25pf ? strong medium edge (mpsm), c l =50pf ? medium and low performance pads (mp/lp), the identical output strength settings: qspi_tmgmm.vsd sclk 1)2) mtsr 1) t 51 mrst 1) t 53 data valid slson 2) 1) this timing is based on the following setup: econ.cph = 1, econ.cpol = 0, econ.b=0 (no sampling point delay). 2) t510 is the deviation from the ideal position configured with the leading delay, bacon.lpre and bacon.lead > 0. t 50 t 500 t 52 data valid sampling point t 510 0.5 v ext/flex 0.5 v ext/flex 0.5 v ext/flex qspi_tmgsm.vsd sclki 1) t 55 mtsr 1) t 57 data valid t 56 slsi 1) this timing is based on the following setup: econ.cph = 1, econ.cpol = 0. t 54 t 55 t 59 last latching sclk edge first latching sclk edge t 57 data valid t 56 mrst 1) t 60 first shift sclk edge t 60 t 61 t 58 0.5 v ext/flex 0.5 v ext/flex tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-404 v 1.1 2015-05 ? medium edge (lp/mpm), c l =50pf ? weak edge (mpw), c l =50pf table 3-67 master mode timing, lvdsm output pads for data and clock parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 20 - - ns c l =25pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -2 - 2 ns c l =25pf mtsr delay from sclko shifting edge t 51 cc -5 - 5 ns c l =25pf slson deviation from the ideal programmed position t 510 cc -2 - 55 ns c l =25pf; mpsm -9 - 12 ns c l =25pf; mpss -7 - 12 ns mp+ss; c l =25pf -2 - 26 ns mp+sm; c l =25pf mrst setup to sclk latching edge 4) 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 20 - - ns c l =25pf; lvdsm 5v output and lvdsh 3.3v input mrst hold from sclk latching edge t 53 sr -6 - - ns c l =25pf; lvdsm 5v output and lvdsh 3.3v input table 3-68 master mode mp+ss/mprss output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 40 - - ns c l =25pf deviation from the ideal duty cycle 2) 3) t 500 cc -5 - 5 ns 0 < c l < 50pf mtsr delay from sclko shifting edge t 51 cc -12 - 12 ns c l =25pf slson deviation from the ideal programmed position t 510 cc -12 - 12 ns c l =25pf mrst setup to sclk latching edge 4) t 52 sr 50 4)5) --ns c l =25pf mrst hold from sclk latching edge t 53 sr -5 4)5) --ns c l =25pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-405 v 1.1 2015-05 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. table 3-69 master mode mp+sm/mprsm output pads for data and clock parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 100 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -3 - 7 ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -17 - 17 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -17 - 17 ns mp+sm; c l =50pf -22 - 2 ns mpss; c l =50pf 0 - 70 ns mp+m; mpm; lpm; c l =50pf mrst setup to sclk latching edge 4) 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 85 4)5) 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. --ns c l =50pf mrst hold from sclk latching edge t 53 sr -10 4)5) --ns c l =50pf table 3-70 master mode timing mpss output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) t 50 cc 40 - - ns c l =25pf deviation from the ideal duty cycle 2) 3) t 500 cc -5 - 5+0.04 * c l ns c l =25pf mtsr delay from sclko shifting edge t 51 cc -7 - 7 ns c l =25pf slson deviation from the ideal programmed position t 510 cc -10 - 10 ns c l =25pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-406 v 1.1 2015-05 mrst setup to sclk latching edge 4) t 52 sr 50 4)5) --ns c l =25pf mrst hold from sclk latching edge t 53 sr -6 4)5) --ns c l =25pf 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. table 3-71 master mode timing mpsm output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 200 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -5 - 9+0.06 * c l ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -19 - 19 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -19 - 17 ns c l =50pf mrst setup to sclk latching edge 4) 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 100 4)5) 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. --ns c l =50pf mrst hold from sclk latching edge t 53 sr -13 4)5) --ns c l =50pf table 3-72 master mode timing mprm/mp+m/mpm/lpm output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) t 50 cc 400 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) t 500 cc -6-0.07 * c l -6+0.095 * c l ns 0 < c l < 200pf table 3-70 master mode timing mpss output pads (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-407 v 1.1 2015-05 mtsr delay from sclko shifting edge t 51 cc -25 - 33 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -35 - 35 ns c l =50pf mrst setup to sclk latching edge 4) t 52 sr 120 4)5) --ns c l =50pf mrst hold from sclk latching edge t 53 sr -13 4)5) --ns c l =50pf 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. table 3-73 master mode weak output pads parameter symbol values unit note / test condition min. typ. max. sclko clock period 1) 1) documented value is valid for master transmit or slave receiv e only. for full duplex the external spi counterpart timing has to be taken into account. t 50 cc 2000 - - ns c l =50pf deviation from the ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted using the bit fields econz.a, b and c with the finest granularity of t max = 1 / f max . 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 500 cc -110 - 125 ns 0 < c l < 200pf mtsr delay from sclko shifting edge t 51 cc -170 - 170 ns c l =50pf slson deviation from the ideal programmed position t 510 cc -170 - 170 ns c l =50pf mrst setup to sclk latching edge 4) 4) for compensation of the average on-chip delay the q spi module provides the bit fields econz.a, b and c. t 52 sr 510 4)5) 5) the setup and hold times are valid for both sett ings of the input pads thresholds: ttl and al. --ns c l =50pf mrst hold from sclk latching edge t 53 sr -40 4)5) --ns c l =50pf table 3-72 master mode timing mprm/mp+m/mpm/lpm output pads (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-408 v 1.1 2015-05 table 3-74 slave mode timing parameter symbol values unit note / test condition min. typ. max. sclk clock period t 54 sr 4 x t max --ns sclk duty cycle t 55/t54 sr 40 - 60 % mtsr setup to sclk latching edge t 56 sr 7 1) 1) except pin p15.1 - - ns hystheresis inactive 9 1) - - ns input level al 7 1) - - ns input level ttl mtsr hold from sclk latching edge t 57 sr 5 1) - - ns hystheresis inactive 11 1) - - ns input level al 16 1) - - ns input level ttl slsi setup to first sclk shift edge t 58 sr 7 1) - - ns hystheresis inactive 7 1) - - ns input level al 14 1) - - ns input level ttl 11 - - ns only for pin p15.1, al slsi hold from last sclk latching edge t 59 sr 5 1) - - ns hystheresis inactive 7 1) - - ns input level al 14 1) - - ns input level ttl mrst delay from sclk shift edge t 60 cc 13 - 120 ns mp+m/mprm; c l =50pf 12.5 - 85 ns mp+sm/mprsm; c l =50pf 5.5 - 50 ns mp+ss/mprss; c l =25pf 70 - 500 ns mp+w/mprw; c l =50pf 13 - 120 ns mpm/lpm; c l =50pf 13 - 100 ns mpsm; c l =50pf 6 - 52 ns mpss; c l =25pf 70 - 500 ns mpw/lpw; c l =50pf slsi to valid data on mrst t 61 sr - - 9 ns tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationqspi timings, master and slave mode data sheet 3-409 v 1.1 2015-05 figure 3-20 master mode timing figure 3-21 slave mode timing qspi_tmgmm.vsd sclk 1)2) mtsr 1) t 51 mrst 1) t 53 data valid slson 2) 1) this timing is based on the following setup: econ.cph = 1, econ.cpol = 0, econ.b=0 (no sampling point delay). 2) t510 is the deviation from the ideal position configured with the leading delay, bacon.lpre and bacon.lead > 0. t 50 t 500 t 52 data valid sampling point t 510 0.5 v ext/flex 0.5 v ext/flex 0.5 v ext/flex qspi_tmgsm.vsd sclki 1) t 55 mtsr 1) t 57 data valid t 56 slsi 1) this timing is based on the following setup: econ.cph = 1, econ.cpol = 0. t 54 t 55 t 59 last latching sclk edge first latching sclk edge t 57 data valid t 56 mrst 1) t 60 first shift sclk edge t 60 t 61 t 58 0.5 v ext/flex 0.5 v ext/flex tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationmsc timing 5 v operation data sheet 3-410 v 1.1 2015-05 3.26 msc timing 5 v operation the following section defines the timings for 5v pad power supply. note: pad asymmetry is already in cluded in the following timings. note: load for lvds pads are defined as differential loads in the following timings. table 3-75 lvds clock/data (lvds pads in lvds mode) parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . t 40 cc 2 * t a 2) 3) 2) t a depends on the clock source selected for baud rate generation in the abra block of the msc. 3) the capacitive load on the lvds pins is differenti al, the capacitive load on the cmos pins is single ended. --nslvdsm; c l =50pf deviation from ideal duty cycle 4) 5) t 400 cc -1 - 1 ns lvdsm; 0 < c l < 50pf sopx output delay 6) t 44 cc -3 - 4 ns lvdsm; c l =50pf; option en01 -4 - 4.5 ns lvdsm; c l =50pf; option en01d enx output delay 6) t 45 cc -4 - 5 ns mp+ss/mprss; option en01; c l =25pf -3.5 - 7 ns mp+ss/mprss; option en01; c l =50pf -3 - 11 ns mp+sm/mprsm; option en01d; c l =50pf -2.5 - 9 ns mp+ss/mprss; option en23; c l =25pf -2.5 - 10 ns mp+ss/mprss; option en23; c l =50pf -3 - 11 ns mpss; option en01; c l =50pf -7 - 3 ns mp+ss/mprss; option en01; c l =0pf -5 - 3 ns mp+sm/mprsm; option en01d; c l =0pf -4 - 6 ns mp+ss/mprss; option en23; c l =0pf -7 - 4 ns mpss; option en01; c l =0pf sdi bit time t 46 cc 8 * t msc - - ns upstream timing sdi rise time 7) t 48 sr - - 200 ns upstream timing sdi fall time 7) t 49 sr - - 200 ns upstream timing tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationmsc timing 5 v operation data sheet 3-411 v 1.1 2015-05 4) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 5) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 6) from fclp rising edge. 7) when using slow and asymmetrical edges, like in case of ope n drain upstream connection, the application must take care that the bit is long enough (the baud rate is low enough) so that under worst case conditions the three sampling points in the middle of the bi t are not violated. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationmsc timing 5 v operation data sheet 3-412 v 1.1 2015-05 timing options for t 45 the wiring shown in the figure 3-22 provides three useful timing options for t 45 . depending on the signals selected with the alternate output lines (alt1 to alt7) in the ports: ? en01 - fcln, son, en0, en1 - t 45 reference timing ? en01d - fclnd, sond, en0, en1 - t 45 window shifted to the left ? en23 - fcln, son, en2, en3 - t 45 window shifted to the right the timings corresponding to en01, en01d, and en23 are defined in the lvds mode. in order to use the en23 timings, the application should use the en2 and en3 outputs of the msc module. figure 3-22 timing options for t 45 mapping b, cmos mp pads this timing applies for the dedicated cmos pads, pin mapping b: ? mp strong sharp (mpss) output pads for the clock and the data signals ? mp strong sharp or strong medium (mp+ss or mp+sm) output pads for enable signals table 3-76 mpss clock/data (lvds pads in cmos mode, option en01) parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) t 40 cc 2 * t a 2) 3) --nsmpss; c l =50pf deviation from ideal duty cycle 4) 5) t 400 cc -2 - 3+0.035 * c l ns mpss; 0 < c l < 100pf msc pad en0 alt1 altx alty alt7 pad en1 alt1 altx alty alt7 pad alt1 altx alty alt7 pad alt1 altx alty alt7 fclp fcln sop son lvdsm lvdsm en2 en3 fcln fclnd son sond cmos cmos _doublepath_4a.vsd tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationmsc timing 5 v operation data sheet 3-413 v 1.1 2015-05 sopx output delay 6) t 44 cc -4 - 7 ns mpss; c l =50pf enx output delay 6) t 45 cc -6 - 7 ns mp+ss/mprss; c l =50pf -2 - 16.5 ns mp+sm/mprsm; c l =50pf -4 - 10 ns mpss; c l =50pf 0 - 32 ns mpsm; c l =50pf; except pin p13.0 0 - 32 ns mpsm; c l =50pf; pin p13.0 5 - 45 ns mpm/mp+m/mprm; c l =50pf -11 - 7.5 ns mp+ss/mprss; c l =0pf -4 - 13 ns mp+sm/mprsm; c l =0pf -10 - 7 ns mpss; c l =0pf -1 - 22 ns mpsm; c l =0pf -2 - 25 ns mp+m/mpm/mprm; c l =0pf sdi bit time t 46 cc 8 * t msc - - ns upstream timing sdi rise time 7) t 48 sr - - 200 ns upstream timing sdi fall time 7) t 49 sr - - 200 ns upstream timing 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . 2) t a depends on the clock source selected for baud rate generation in the abra block of the msc. 3) fclp signal high and low can be minimum 1 * t msc . 4) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 5) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 6) from fclp rising edge. 7) when using slow and asymmetrical edges, like in case of ope n drain upstream connection, the application must take care that the bit is long enough (the baud rate is low enough) so that under worst case conditions the three sampling points in the middle of the bi t are not violated. table 3-77 mp+sm/mprsm clock/data parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) t 40 cc 2 * t a - - ns mp+sm/mprsm; c l =50pf deviation from ideal duty cycle 2) 3) t 400 cc -3 - 3+0.01 * c l ns mp+sm/mprsm; 0 < c l < 200pf table 3-76 mpss clock/data (lvds pads in cmos mode, option en01) (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationmsc timing 5 v operation data sheet 3-414 v 1.1 2015-05 sopx output delay 4) t 44 cc -5 - 7 ns mp+sm; c l =50pf enx output delay 4) t 45 cc -13 - 2 5) ns mpss; c l =50pf -5 - 11 ns mp+sm/mprsm; c l =50pf 1 - 25 ns mpsm; c l =50pf 3 - 37 ns mp+m/mpm/mprm; c l =50pf -19 - 2 ns mpss; c l =0pf -13 - 8 ns mp+sm; c l =0pf -5 - 17 ns mpsm; c l =0pf -5 - 20 ns mpm/mp+m/mprm; c l =0pf 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 4) from fclp rising edge. 5) if en1 is configured to p13.0 the ma x limt is increased by 0.5ns to 2.5ns. table 3-78 mpm/mp+m/mprm clock/data parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . t 40 cc 2 * t a - - ns mpm/mp+m/mprm; c l =50pf deviation from ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 400 cc -16 - 4+0.04 * c l ns mpm/mp+m; 0 < c l < 200pf sopx output delay 4) 4) from fclp rising edge. t 44 cc -11 - 20 ns mpm/mp+m; c l =50pf enx output delay 4) t 45 cc -13 - 24 ns mpm/mp+m/mprm; c l =50pf -33 - 17 ns mpm/mp+m/mprm; c l =0pf table 3-77 mp+sm/mprsm clock/data (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationms c timing 3.3 v operation data sheet 3-415 v 1.1 2015-05 figure 3-23 msc interface timing note: the sop data signal is sampled with the falling edge of fclp in the target device. 3.27 msc timing 3.3 v operation the following section defines the timings for 3.3v pad power supply. mapping a, combo pads in lvds mode or cmos mode the timing applies for the lvds pads in lvds operating mode: ? the lvdsm output pads for clock and data signals set in lvds mode ? the cmos mp pads for enable signals, with strong driver sharp edge (mpss) or strong driver medium edge (mpsm). table 3-79 lvds clock/data (lvds pads in lvds mode) parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) t 40 cc 2 * t a 2) 3) --nslvdsm; c l =50pf deviation from ideal duty cycle 4) 5) t 400 cc -2 - 2 ns lvdsm; 0 < c l < 50pf sopx output delay 6) t 44 cc -5 - 5 ns lvdsm; c l =50pf; option en01 -7 - 7 ns lvdsm; c l =50pf; option en01d msc_timing_a.vsd t 44 t 44 t 40 sop fclp sdi t 46 t 48 0.1 v ext/flex 0.9 v ext/flex t 49 t 46 t 45 t 45 en t 400 0.5 v ext/flex tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationms c timing 3.3 v operation data sheet 3-416 v 1.1 2015-05 mapping b, cmos mp pads this timing applies for the dedicated cmos pads, pin mapping b: ? mp strong sharp (mpss) output pads for the clock and the data signals ? mp strong sharp or strong medium (mpss or mpsm) output pads for enable signals enx output delay 6) t 45 cc -7 - 9.5 ns mp+ss/mprss; option en01; c l =25pf -5 - 13 ns mp+ss/mprss; option en01; c l =50pf -5 - 26 ns mp+sm/mprsm; option en01d; c l =50pf -4 - 16 ns mp+ss/mprss; option en23; c l =25pf -4 - 17 ns mp+ss/mprss; option en23; c l =50pf -5 - 19 ns mpss; option en01; c l =50pf -12 - 5.5 ns mp+ss/mprss; option en01; c l =0pf -9 - 11 ns mp+sm/mprsm; option en01d; c l =0pf -7 - 9 ns mp+ss/mprss; option en23; c l =0pf -12 - 7 ns mpss; option en01; c l =0pf sdi bit time t 46 cc 8 * t msc - - ns upstream timing sdi rise time 7) t 48 sr - - 200 ns upstream timing sdi fall time 7) t 49 sr - - 200 ns upstream timing 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . 2) t amin = t max . when t max = 100 mhz, t 40 = 20 ns 3) the capacitive load on the lvds pins is differenti al, the capacitive load on the cmos pins is single ended. 4) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 5) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. 6) from fclp rising edge. 7) when using slow and asymmetrical edges, like in case of ope n drain upstream connection, the application must take care that the bit is long enough (the baud rate is low enough) so that under worst case conditions the three sampling points in the middle of the bi t are not violated. table 3-79 lvds clock/data (lvds pads in lvds mode) (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationms c timing 3.3 v operation data sheet 3-417 v 1.1 2015-05 table 3-80 mpss clock/data (lvds pads in cmos mode, option en01) parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . t 40 cc 2 * t a 2) 3) 2) t amin = t max . when t max = 100 mhz, t 40 = 20 ns 3) fclp signal high and low can be minimum 1 * t msc . --nsmpss; c l =50pf deviation from ideal duty cycle 4) 5) 4) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 5) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 400 cc -5 - 7+0.07 * c l ns mpss; 0 < c l < 100pf sopx output delay 6) 6) from fclp rising edge. t 44 cc -7 - 12 ns mpss; c l =50pf enx output delay 6) t 45 cc -9 - 12 ns mp+ss/mprss; c l =50pf -4 - 26 ns mp+sm/mprsm; c l =50pf -7 - 17 ns mpss; c l =50pf 0 - 56 ns mpsm; c l =50pf; except pin p13.0 0 - 58 ns mpsm; c l =50pf; pin p13.0 4 - 77 ns mpm/mp+m/mprm; c l =50pf -19 - 8 ns mp+ss/mprss; c l =0pf -7 - 19 ns mp+sm/mprsm; c l =0pf -17 - 8 ns mpss; c l =0pf -2 - 38 ns mpsm; c l =0pf -4 - 41 ns mp+m/mpm/mprm; c l =0pf sdi bit time t 46 cc 8 * t msc - - ns upstream timing sdi rise time 7) 7) when using slow and asymmetrical edges, like in case of ope n drain upstream connection, the application must take care that the bit is long enough (the baud rate is low enough) so that under worst case conditions the three sampling points in the middle of the bi t are not violated. t 48 sr - - 200 ns upstream timing sdi fall time 7) t 49 sr - - 200 ns upstream timing tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationms c timing 3.3 v operation data sheet 3-418 v 1.1 2015-05 table 3-81 mp+sm/mprsm clock/data parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . t 40 cc 2 * t a - - ns mp+sm/mprsm; c l =50pf deviation from ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 400 cc -6 - 7 ns mp+sm/mprsm; 0 < c l < 200pf sopx output delay 4) 4) from fclp rising edge. t 44 cc -9 - 12 ns mp+sm; c l =50pf enx output delay 4) t 45 cc -20 - 4 ns mpss; c l =50pf -9 - 19 ns mp+sm/mprsm; c l =50pf 0 - 44 ns mpsm; c l =50pf 0 - 63 ns mp+m/mpm/mprm; c l =50pf -33 - 0 ns mpss; c l =0pf -23 - 9 ns mp+sm/mprsm; c l =0pf -9 - 28 ns mpsm; c l =0pf -9 - 31 ns mpm/mp+m/mprm; c l =0pf table 3-82 mpm/mp+m/mprm clock/data parameter symbol values unit note / test condition min. typ. max. fclpx clock period 1) 1) fclp signal rise/fall times are the rise/fall times of the lvdsm pads, and the high/low times are min 1 * t a . t 40 cc 2 * t a - - ns mpm/mp+m/mprm; c l =50pf deviation from ideal duty cycle 2) 3) 2) the pll jitter is not included. it shou ld be considered additionally, corresponding to the used baudrate. the duty cycle can be adjusted if the abra block is used. 3) positive deviation lenghtens the high time and shortens the low time of a clock period. negative deviation does the opposite. t 400 cc -6-0.95 * c l -6+0.07 * c l ns mpm/mp+m/mprm; 0 < c l < 200pf sopx output delay 4) t 44 cc -19 - 34 ns mpm/mp+m; c l =50pf enx output delay 4) t 45 cc -19 - 38 ns mpm/mp+m/mprm; c l =50pf -57 - 27 ns mpm/mp+m/mprm; c l =0pf tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationms c timing 3.3 v operation data sheet 3-419 v 1.1 2015-05 figure 3-24 msc interface timing note: the sop data signal is sampled with the falling edge of fclp in the target device. 4) from fclp rising edge. msc_timing_a.vsd t 44 t 44 t 40 sop fclp sdi t 46 t 48 0.1 v ext/flex 0.9 v ext/flex t 49 t 46 t 45 t 45 en t 400 0.5 v ext/flex tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionethernet interface (eth) characteristics data sheet 3-420 v 1.1 2015-05 3.28 ethernet interface (eth) characteristics 3.28.1 eth measurement reference points figure 3-25 eth measurement reference points eth_testpoints.vsd eth clock 1.4 v 1.4 v 2.0 v 0.8 v 2.0 v 0.8 v t r t f eth i/o tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionethernet interface (eth) characteristics data sheet 3-421 v 1.1 2015-05 3.28.2 eth management signal pa rameters (eth_mdc, eth_mdio) figure 3-26 eth management signal timing table 3-83 eth management signal parameters parameter symbol values unit note / test condition min. typ. max. eth_mdc period t 1 cc 400 - - ns c l =25pf eth_mdc high time t 2 cc 160 - - ns c l =25pf eth_mdc low time t 3 cc 160 - - ns c l =25pf eth_mdio setup time (output) t 4 cc 10 - - ns c l =25pf eth_mdio hold time (output) t 5 cc 10 - - ns c l =25pf eth_mdio data valid (input) t 6 sr 0 - 300 ns c l =25pf eth_timing-mgmt.vsd eth_mdc eth_mdio (output ) t 5 valid data t 4 valid data t 6 eth_mdio (input ) eth_mdc eth_mdio sourced by controller : eth_ mdio sourced by phy: eth_mdc t 1 t 3 t 2 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionethernet interface (eth) characteristics data sheet 3-422 v 1.1 2015-05 3.28.3 eth mii parameters in the following, the parameters of the mii (media independent interface) are described. figure 3-27 eth mii signal timing table 3-84 eth mii signal timing parameters parameter symbol values unit note / test condition min. typ. max. clock period t 7 sr 40 - - ns c l =25pf; baudrate=100mbps 400 - - ns c l =25pf; baudrate=10mbps clock high time t 8 sr 14 - 26 ns c l =25pf; baudrate=100mbps 140 1) 1) defined by 35% of clock period. -260 2) 2) defined by 65% of clock period. ns c l =25pf; baudrate=10mbps clock low time t 9 sr 14 - 26 ns c l =25pf; baudrate=100mbps 140 1) -260 2) ns c l =25pf; baudrate=10mbps input setup time t 10 sr 10 - - ns c l =25pf input hold time t 11 sr 10 - - ns c l =25pf output valid time t 12 cc 0 - 25 ns c l =25pf eth_timing-mii.vsd eth_mii_rx_clk eth_mii_txd[3:0] eth_mii_txen eth_mii_rxd[3:0] eth_mii_rx_dv eth_mii_rx_er eth_mii_tx_clk t 11 valid data t 10 valid data t 12 (sourced by controller ) (sourced by phy ) t 7 t 9 t 8 eth_mii_rx_clk eth_mii_tx_clk tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificat ionethernet interface (eth) characteristics data sheet 3-423 v 1.1 2015-05 3.28.4 eth rmii parameters in the following, the parameters of the rmii (reduced media independent interface) are described. figure 3-28 eth rmii signal timing table 3-85 eth rmii signal timing parameters parameter symbol values unit note / test condition min. typ. max. eth_rmii_ref_cl clock period t 13 cc 20 - - ns c l =25pf; 50ppm eth_rmii_ref_cl clock high time t 14 cc 7 1) 1) defined by 35% of clock period. -13 2) 2) defined by 65% of clock period. ns c l =25pf eth_rmii_ref_cl clock low time t 15 cc 7 1) -13 2) ns c l =25pf ethtxen, ethtxd[1:0], ethrxd[1:0], ethcrsdv, ethrxer; setup time t 16 cc 4 - - ns c l =25pf ethtxen, ethtxd[1:0], ethrxd[1:0], ethcrsdv, ethrxer; hold time t 17 cc 2 - - ns c l =25pf eth_timing-rmii .vsd eth_rmii_ref_cl t 17 valid data t 16 t 13 t 15 t 14 eth_rmii_ref_cl ethtxen, ethtxd[1:0], ethrxd[1:0], ethcrsdv, ethrxer tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificatione-ray parameters data sheet 3-424 v 1.1 2015-05 3.29 e-ray parameters table 3-86 transmit parameters parameter symbol values unit note / test condition min. typ. max. rise time of txen t dcctxenrise2 5 cc --9 ns c l =25pf fall time of txen t dcctxenfall25 cc --9 ns c l =25pf sum of rise and fall time t dcctxrise25+ dcctxfall25 cc - - 9 ns 20% - 80%; c l =25pf sum of delay between tp1_ff and tp1_cc and delays derived from tp1_ffi, rising edge of txen t dcctxen01 cc --25 ns sum of delay between tp1_ff and tp1_cc and delays derived from tp1_ffi, falling edge of txen t dcctxen10 cc --25 ns asymmetry of sending t tx_asym cc -2.45 - 2.45 ns c l =25pf sum of delay between tp1_ff and tp1_cc and delays derived from tp1_ffi, rising edge of txd t dcctxd01 cc --25 ns sum of delay between tp1_ff and tp1_cc and delays derived from tp1_ffi, falling edge of txd t dcctxd10 cc --25 ns txd signal sum of rise and fall time at tp1_bd t txd_sum cc - - 9 ns table 3-87 receive parameters parameter symbol values unit note / test condition min. typ. max. acceptance of asymmetry at receiving part t dcctxasymacc ept25 sr -30.5 - 43.0 ns c l =25pf acceptance of asymmetry at receiving part t dcctxasymacc ept15 sr -31.5 - 44.0 ns c l =15pf threshold for detecting logical high t ucclogic1 sr 35 - 70 % threshold for detecting logical low t ucclogic0 sr 30 - 65 % tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificatione-ray parameters data sheet 3-425 v 1.1 2015-05 sum of delay between tp4_cc and tp4_ff and delays derived from tp4_ffi, rising edge of rxd t dccrxd01 cc --10 ns sum of delay between tp1_cc and tp1_cc and delays derived from tp4_ffi, falling edge of rxd t dccrxd10 cc --10 ns table 3-87 receive parameters (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationhsct parameters data sheet 3-426 v 1.1 2015-05 3.30 hsct parameters table 3-88 hsct - rx/tx setup timing parameter symbol values unit note / test condition min. typ. max. rx o/p duty cycle dcrx cc 40 - 60 % bias startup time t bias cc - 5 10 s bias distributor waking up from power down and provide stable bias. rx startup time t rxi cc - 5 - s wake-up rx from power down. tx startup time t tx cc - 5 - s wake-up tx from power down. table 3-89 hsct - rx parasitics and loads parameter symbol values unit note / test condition min. typ. max. capacitance total budget c total cc - 3.5 5 pf total budget for complete receiver including silicon, package, pins and bond wire parasitic inductance budget htotal cc-5-nh table 3-90 lvdsh - reduced tx and rx (red) parameter symbol values unit note / test condition min. typ. max. output differential voltage v od cc 150 200 285 mv rt = 100 ohm 20% @2pf output voltage high v oh cc - - 1463 mv rt = 100 ohm 20% output voltage low v ol cc 937 - - mv rt = 100 ohm 20% output offset (common mode) voltage v os cc 1.08 1.2 1.32 v rt = 100 ohm 20% @2pf input voltage range v i sr - - 1.6 v absolute max = 1.6 v + (285mv/2) = 1.743 0.15 - - v absolute min = 0.15 v - (285 mv /2) = 0 v input differential threshold v idth sr -100 - 100 mv 100 mv for 55% of bit period; note absolute value (vidth - vidthl) data frequency dr cc 5 - 320 mbps tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationhsct parameters data sheet 3-427 v 1.1 2015-05 receiver differential input impedance r in cc 90 100 110 ohm 0 v < v i < 1.6v 80 100 120 ohm 1.6 v < v i < 2.0v slew rate srtx cc - - 2 v/ns change in vos between 0 and 1 dvos cc - - 50 mv peak to peak (including dc transients). change in vod between 0 and 1 dvod cc - - 50 mv peak to peak (including dc transients) fall time 1) t fall cc 0.26 - 1.2 ns rt = 100 ohm 20% @2pf rise time 1) t rise cc 0.26 - 1.2 ns rt = 100 ohm 20% @2pf 1) rise / fall times are defined for 10% - 90% of v od table 3-91 hsct pll parameter symbol values unit note / test condition min. typ. max. pll frequency range f pll cc 12.5 320 320 mhz pll input frequency f ref cc 10 - 20 mhz pll lock-in time t lock cc - - 50 s bit error rate based on 10 mhz reference clock at slave pll side ber 10 cc - - 10exp-9 - bit error rate based on slave interface reference clock at 10 mhz bit error rate based on 20 mhz reference clock at slave pll side ber 20 cc - - 10exp- 12 - bit error rate based on slave interface reference clock at 20 mhz absolute rms jitter (tx out) j abs10 cc -125 - 125 ps measured at link tx out; valid for reference frequency at 10 mhz absolute rms jitter (tx out) j abs20 cc -85 - 85 ps measured at link tx out; valid for reference frequency at 20 mhz table 3-90 lvdsh - reduced tx and rx (red) (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specific ationhsct parameters data sheet 3-428 v 1.1 2015-05 accumulated rms jitter (rx side) j acc10 cc - - 145 ps measured at link rx input, based on 5000 measures, each 300 clock cycles; valid for reference frequency at 10 mhz accumulated rms jitter (link rx side) j acc20 cc - - 115 ps measured at link rx input, based on 5000 measures, each 300 clock cycles; valid for reference frequency at 20 mhz total jitter peak to peak tj pp cc - - 2083 ps total jitter as sum of deterministic jitter and random jitter table 3-92 hsct sysclk parameter symbol values unit note / test condition min. typ. max. frequency f sysclk cc 10 - 20 mhz frequency error dferr cc -1 - 1 % duty cycle dcsys cc 45 - 55 % load impedance r load cc 10 - - kohm load capacitance c load cc - - 10 pf integrated phase noise i pn cc - - -58 db single sideband phase noise in 10 khz to 10 mhz at 20 mhz sysclk table 3-91 hsct pll (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationinter-ic (i2c) interface timing data sheet 3-429 v 1.1 2015-05 3.31 inter-ic (i2c ) interface timing this section defines the timings for i2c in the tc290 / TC297 / tc298 / tc299. all i2c timing parameter are sr for master mode and cc for slave mode. table 3-93 i2c standard mode timing parameter symbol values unit note / test condition min. typ. max. fall time of both sda and scl t 1 - - 300 ns measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line capacitive load for each bus line c b sr - - 400 pf bus free time between a stop and atart condition t 10 4.7 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line rise time of both sda and scl t 2 - - 1000 ns measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line data hold time t 3 0 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line data set-up time t 4 250 - - ns measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line low period of scl clock t 5 4.7 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line high period of scl clock t 6 4 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line hold time for the (repeated) start condition t 7 4 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationinter-ic (i2c) interface timing data sheet 3-430 v 1.1 2015-05 set-up time for (repeated) start condition t 8 4.7 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line set-up time for stop condition t 9 4 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line table 3-94 i2c fast mode timing parameter symbol values unit note / test condition min. typ. max. fall time of both sda and scl t 1 20+0.1* c b - 300 ns measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line capacitive load for each bus line c b sr - - 400 pf bus free time between a stop and atart condition t 10 1.3 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line rise time of both sda and scl t 2 20+0.1* c b - 300 ns measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line data hold time t 3 0 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line data set-up time t 4 100 - - ns measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line low period of scl clock t 5 1.3 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line high period of scl clock t 6 0.6 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line table 3-93 i2c standard mode timing (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationinter-ic (i2c) interface timing data sheet 3-431 v 1.1 2015-05 figure 3-29 i2c standard and fast mode timing hold time for the (repeated) start condition t 7 0.6 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line set-up time for (repeated) start condition t 8 0.6 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line set-up time for stop condition t 9 0.6 - - s measured with a pull- up resistor of 4.7 kohms at each of the scl and sda line table 3-94 i2c fast mode timing (cont?d) parameter symbol values unit note / test condition min. typ. max. scl sda scl sda t 1 t 2 t 1 t 2 t 10 t 9 t 7 t 8 t 7 t 3 t 4 t 5 t 6 ps sr s 70% 30 % 9 th clock 9 th clock tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationebu timings data sheet 3-432 v 1.1 2015-05 3.32 ebu timings 3.32.1 bfclko output clock timing v ss = 0 v; v dd = 1.3 v 5%; v ddebu = 2.5 v 5% and 3.3 v 5%,; c l = 35 pf figure 3-30 bfclko output clock timing 3.32.2 ebu asynchronous timings v ss = 0 v; v dd = 1.3 v 5%; v ddebu = 2.5 v 5% and 3.3 v 5%, class b pins; c l = 35 pf for address/data; c l = 40pf for the control lines. for each timing, the accumulated pll jitter of the progra med duration in number of clock periods must be added separately. operating conditions apply and c l = 35 pf. table 3-95 bfclk0 output clock timing parameters 1) 1) not subject to production test, ve rified by design/characterization. parameter symbol values unit note / test conditi on min. typ. max. bfclko clock period t bfclko cc 13.33 2) 2) the pll jitter characteristics add to this value according to the application settings. see the pll jitter parameters. ?? ns? bfclko high time t 5 cc 3 ? ? ns ? bfclko low time t 6 cc 3 ? ? ns ? bfclko rise time t 7 cc ? ? 3 ns ? bfclko fall time t 8cc ??3ns? bfclko duty cycle t 5 /( t 5 + t 6 ) 3) 3) the pll jitter is not included in this parameter. if the bfclko frequency is equal to f cpu , the k divider has to be regarded. dc 35 50 55 % ? table 3-96 common asynchronous timings parameter symbol values unit note / test condition min. typ. max. ad(31:0) output delay to adv# rising edge, multiplexed read / write t 13 cc -5.5 - 2 ns ad(31:0) output delay to adv# rising edge, multiplexed read / write t 14 cc -5.5 - 2 ns 0.9 v dd mct04883_mod 0.5 v ddp05 bfclko t bfclko t 5 t 6 0.1 v dd t 8 t 7 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationebu timings data sheet 3-433 v 1.1 2015-05 address valid to cs falling edge (deviation from programmed value) t 15 cc -2 - 2 ns address valid -> adv falling edge (deviation from programmed value) t 16 cc -2 - 2 ns adv falling edge -> cs falling edge (deviation from programmed value) t 17 cc -2 - 2 ns pulse wdih deviation from the ideal programmed width due to pad asymmetry, rise delay - fall delay t a cc -0.8 - 0.8 ns edge=medium -0.8 - 0.8 ns edge=sharp table 3-97 asynchronous read timings parameter symbol values unit note / test condition min. typ. max. a(23:0) output delay to rd rising edge, deviation from the ideal programmed value t 0 cc -2.5 - 2.5 ns ad(31:0) output delay to adv# rising edge, multiplexed read / write t 13 cc -2.5 - 10 ns ad(31:0) output delay to adv# rising edge, multiplexed read / write t 14 cc -2.5 - 10 ns data input hold from cs rising edge t 18 cc -4 - - ns data input setup to cs rising edge t 19 cc 12 - - ns a(23:0) output delay to rd rising edge, deviation from the ideal programmed value t 1 cc -2.5 - 2.5 ns cs rising edge to rd rising edge, deviation from the ideal programmed value t 2 cc -2 - 2.5 ns adv rising edge to rd rising edge, deviation from the ideal programmed value t 3 cc -1.5 - 4.5 ns bc rising edge to rd rising edge, deviation from the ideal programmed value t 4 cc -2.5 - 2.5 ns table 3-96 common asynchronous timings (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationebu timings data sheet 3-434 v 1.1 2015-05 figure 3-31 multiplexed read access wait input setup to rd rising edge t 5 sr 12 - - ns wait input hold to rd rising edge t 6 sr 0 - - ns data input setup to rd rising edge t 7 sr 12 - - ns data input hold to rd rising edge t 8 sr 0 - - ns mr / w output delay to rd# rising edge, deviation from the ideal programmed value t 9 cc -2.5 - 1.5 ns table 3-97 asynchronous read timings (cont?d) parameter symbol values unit note / test condition min. typ. max. new_muxwr_async_10.vsd cs[3:0] cscomb adv ad[31:0] data out bc[3:0] wait a[23:0] valid address next addr. ebu state address phase address hold phase (opt.) command phase recovery phase (opt.) new addr. phase addrc aholdc rdwait rdrecovc addrc 1...15 0...15 duration limits in ebu_clk cycles 1...31 0...15 1...15 control bitfield: t 30 t 31 t a t 32 t a t 33 t a t a t a t 34 t 37 t 38 t 39 t 35 t 36 data hold phase pv + pv + pv + pv + pv + pv + pv + pv + pv + pv = programmed value, t ebu_clk * sum (correponding bitfield values) datac 0...15 pv + pv + address out t 13 t 14 pv + rd/wr mr/w tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationebu timings data sheet 3-435 v 1.1 2015-05 figure 3-32 demultiplexed read access table 3-98 asynchronous write timings parameter symbol values unit note / test condition min. typ. max. a(23:0) output delay to wr rising edge, deviation from the ideal programmed value t 30 cc -2.5 - 2.5 ns a(23:0) output delay to wr rising edge, deviation from the ideal programmed value t 31 cc -2.5 - 2.5 ns cs rising edge to wr rising edge, deviation from the ideal programmed value t 32 cc -2 - 2 ns new_demuxwr_async_10.vsd cs[3:0] cscomb adv ad[31:0] data out bc[3:0] wait a[23:0] valid address next addr. ebu state address phase address hold phase (opt.) command phase recovery phase (opt.) new addr. phase addrc aholdc rdwait rdrecovc addrc 1...15 0...15 duration limits in ebu_clk cycles 1...31 0...15 1...15 control bitfield: t 30 t 31 t a t 32 t a t 33 t a t a t a t 34 t 37 t 38 t 39 t 35 t 36 data hold phase pv + pv + pv + pv + pv + pv + pv + pv + pv + pv = programmed value, t ebu_clk * sum (correponding bitfield values) datac 0...15 pv + pv + mr/w rd/wr tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationebu timings data sheet 3-436 v 1.1 2015-05 3.32.3 ebu burst mode access timing v ss = 0 v; v dd = 1.3 v 5%; v ddebu = 2.5 v 5% and 3.3 v 5%; c l = 35 pf; adv rising edge to wr rising edge, deviation from the ideal programmed value t 33 cc -2.5 - 2 ns bc rising edge to wr rising edge, deviation from the ideal programmed value t 34 cc -2.5 - 2 ns wait input setup to wr rising edge, deviation from the ideal programmed value t 35 sr 12 - - ns wait input hold to wr rising edge, deviation from the ideal programmed value t 36 cc 0 - - ns data output delay to wr rising edge, deviation from the ideal programmed value t 37 cc -5.5 - 10 ns data output delay to wr rising edge, deviation from the ideal programmed value t 38 cc -5.5 - 2 ns mr / w output delay to wr rising edge, deviation from the ideal programmed value t 39 cc -2.5 - 1.5 ns table 3-99 burst read timings parameter symbol values unit note / test condition min. typ. max. output delay from bfclko rising edge t 10 cc -2 - 2 ns d(31:0) output delay from bfclko rising edge t 10a cc -2 - 10 ns rd and rd/wr active/inactive after bfclko active edge t 12 cc -2 - 2 ns csx output delay from bfclko active edge t 21 cc -2.5 - 1.5 ns adv active/inactive after bfclko active edge t 22 cc -2 - 2 ns baa active/inactive after bfclko active edge t 22a cc -2.5 - 4.5 ns data setup to bfclki rising edge t 23 sr 3 - - ns table 3-98 asynchronous write timings (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationebu timings data sheet 3-437 v 1.1 2015-05 figure 3-33 ebu burst mode read / write access timing data hold from bfclki rising edge t 24 sr 0 - - ns wait setup (low or high) to bfclki rising edge t 25 sr 3 - - ns wait hold (low or high) from bfclki rising edge t 26 sr 0 - - ns table 3-99 burst read timings (cont?d) parameter symbol values unit note / test condition min. typ. max. data (addr+4) burstrdwr_4.vsd t 10 bfclki bfclko a[23:0] t 22 adv t 21 address phase(s) command phase(s) burst phase(s) recovery phase(s) next addr. phase(s) t 22 t 21 t 21 burst start address next addr. rd rd/wr d[31:0] (32-bit) wait t 12 t 12 data (addr+0) t 24 baa d[15:0] (16-bit) t 22a burst phase(s) data (addr+2) data (addr+0) t 22a t 10 t 22 t 23 t 24 t 23 1) t 26 t 25 output delays are always referenced to bclko. the reference clock for input characteristics depends on bit ebu_bfcon.fdbken. ebu_bfcon.fdbken = 0: bfclko is the input reference clock. ebu_bfcon.fdbken = 1: bfclki is the input reference clock (ebu clock feedback enabled). 1) cs[3:0] cscomb tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationebu timings data sheet 3-438 v 1.1 2015-05 3.32.4 ebu arbitration signal timing v ss = 0 v; v dd = 1.5 v 5%; v ddebu = 2.5 v 5% and 3.3 v 5% ; t a = -40c to +125c; c l = 35 pf; figure 3-34 ebu arbitration signal timing table 3-100 ebu arbitration timings parameter symbol values unit note / test condition min. typ. max. output delay from bfclko rising edge t 27 cc - - 4.5 ns data setup to bfclko falling edge t 28 sr 15 - - ns data hold from bfclko falling edge t 29 sr 2 - - ns ebuarb_1 bfclko hlda output breq output t 27 t 27 t 27 t 27 t 29 t 28 t 29 t 28 bfclko hold input hlda input tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationcif parameters data sheet 3-439 v 1.1 2015-05 3.33 cif parameters cif timings are valid only for temperatures up the t j = 150c. table 3-101 timings for 5v parameter symbol values unit note / test condition min. typ. max. pixel clock period t 70 sr 10.42 - - ns 96 mhz hsync, vsync set up time t 71 sr 2.5 - - ns al input level, hysteresis bypass 2 - - ns ttl input level, hysteresis bypass 6.5 - - ns ttl input level, hysteresis on 4 - - ns al input level, hysteresis on hsync, vsync hold time t 72 sr 2.5 - - ns al input level, hysteresis bypass 2.5 - - ns ttl input level, hysteresis bypass 7 - - ns ttl input level, hysteresis on 4 - - ns al input level, hysteresis on pixel data set up time t 73 sr 2.5 - - ns al input level, hysteresis bypass 2 - - ns ttl input level, hysteresis bypass 6.5 - - ns ttl input level, hysteresis on 4 - - ns al input level, hysteresis on pixel data hold time t 74 sr 2.5 - - ns al input level, hysteresis bypass 2.5 - - ns ttl input level, hysteresis bypass 7 - - ns ttl input level, hysteresis on 4 - - ns al input level, hysteresis on tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationcif parameters data sheet 3-440 v 1.1 2015-05 table 3-102 timings for 3.3v parameter symbol values unit note / test condition min. typ. max. pixel clock period t 70 sr 10.42 - - ns hsync, vsync set up time t 71 sr 3.5 - - ns al input level, hysteresis bypass 4.5 - - ns al input level, hysteresis on 9 - - ns ttl input level, hysteresis on 3 - - ns ttl input level, hysteresis bypass hsync, vsync hold time t 72 sr 4 - - ns al input level, hysteresis bypass 5 - - ns al input level, hysteresis on 10 - - ns ttl input level, hysteresis on 3.5 - - ns ttl input level, hysteresis bypass pixel data set up time t 73 sr 3.5 - - ns al input level, hysteresis bypass 4.5 - - ns al input level, hysteresis on 9 - - ns ttl input level, hysteresis on 3 - - ns ttl input level, hysteresis bypass pixel data hold time t 74 sr 4 - - ns al input level, hysteresis bypass 5 - - ns al input level, hysteresis on 10 - - ns ttl input level, hysteresis on 3.5 - - ns ttl input level, hysteresis bypass table 3-103 timings for 0.4v to 2. 4v input signals (2.8v imager) parameter symbol values unit note / test condition min. typ. max. pixel clock period t 70 sr 10.42 - - ns tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationcif parameters data sheet 3-441 v 1.1 2015-05 hsync, vsync set up time t 71 sr 3 - - ns hysteresis bypass, 3.3v10% 9 - - ns ttl input levels, 3.3v10% 4.5 - - ns ttl input levels, 5v10% hsync, vsync hold time t 72 sr 3.5 - - ns hysteresis bypass, 3.3v10% 10 - - ns ttl input levels, 3.3v10% 5 - - ns ttl input levels, 5v10% pixel data set up time t 73 sr 3 - - ns hysteresis bypass, 3.3v10% 9 - - ns ttl input levels, 3.3v10% 4.5 - - ns ttl input levels, 5v10% pixel data hold time t 74 sr 3.5 - - ns hysteresis bypass, 3.3v10% 10 - - ns ttl input levels, 3.3v10% 5 - - ns ttl input levels, 5v10% table 3-104 timings for 0.4v to 2.4v input signals (2.8v imager), 5% pad power supply parameter symbol values unit note / test condition min. typ. max. pixel clock period t 70 sr 10.42 - - ns hsync, vsync set up time t 71 sr 3 - - ns hysteresis bypass, 3.3v5% 9 - - ns ttl input levels, 3.3v5% 4.5 - - ns ttl input levels, 5v5% hsync, vsync hold time t 72 sr 3.5 - - ns hysteresis bypass, 3.3v5% 10 - - ns ttl input levels, 3.3v5% 5 - - ns ttl input levels, 5v5% table 3-103 timings for 0.4v to 2. 4v input signals (2.8v imager) (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationcif parameters data sheet 3-442 v 1.1 2015-05 pixel data set up time t 73 sr 3 - - ns hysteresis bypass, 3.3v5% 9 - - ns ttl input levels, 3.3v5% 4.5 - - ns ttl input levels, 5v5% pixel data hold time t 74 sr 3.5 - - ns hysteresis bypass, 3.3v5% 10 - - ns ttl input levels, 3.3v5% 5 - - ns ttl input levels, 5v5% table 3-105 timings for 1.8v imager, ttl input level parameter symbol values unit note / test condition min. typ. max. pixel clock period t 70 sr 10.42 - - ns hsync, vsync set up time t 71 sr 3 - - ns input signal 0.1v to 1.7v 9 - - ns input signal 0.2v to 1.6v 4.5 - - ns input signal 0.3v to 1.5v 3.5 - - ns input signal 0.4v to 1.4v hsync, vsync hold time t 72 sr 3.5 - - ns input signal 0.1v to 1.7v 10 - - ns input signal 0.2v to 1.6v 5 - - ns input signal 0.3v to 1.5v 4 - - ns input signal 0.4v to 1.4v pixel data set up time t 73 sr 3 - - ns input signal 0.1v to 1.7v 9 - - ns input signal 0.2v to 1.6v 4.5 - - ns input signal 0.3v to 1.5v 3.5 - - ns input signal 0.4v to 1.4v table 3-104 timings for 0.4v to 2.4v input si gnals (2.8v imager), 5% pad power supply (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationcif parameters data sheet 3-443 v 1.1 2015-05 pixel data hold time t 74 sr 3.5 - - ns input signal 0.1v to 1.7v 10 - - ns input signal 0.2v to 1.6v 5 - - ns input signal 0.3v to 1.5v 4 - - ns input signal 0.4v to 1.4v table 3-106 timings for 1.8v imager, 3. 3v5% pad power supply, ttl input level parameter symbol values unit note / test condition min. typ. max. pixel clock period t 70 sr 10.42 - - ns hsync, vsync set up time t 71 sr 3 - - ns input signal 0.1v to 1.7v 9 - - ns input signal 0.2v to 1.6v 4.5 - - ns input signal 0.3v to 1.5v 3.5 - - ns input signal 0.4v to 1.4v hsync, vsync hold time t 72 sr 3.5 - - ns input signal 0.1v to 1.7v 10 - - ns input signal 0.2v to 1.6v 5 - - ns input signal 0.3v to 1.5v 4 - - ns input signal 0.4v to 1.4v pixel data set up time t 73 sr 3 - - ns input signal 0.1v to 1.7v 9 - - ns input signal 0.2v to 1.6v 4.5 - - ns input signal 0.3v to 1.5v 3.5 - - ns input signal 0.4v to 1.4v table 3-105 timings for 1.8v imager, ttl input level (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationcif parameters data sheet 3-444 v 1.1 2015-05 pixel data hold time t 74 sr 3.5 - - ns input signal 0.1v to 1.7v 10 - - ns input signal 0.2v to 1.6v 5 - - ns input signal 0.3v to 1.5v 4 - - ns input signal 0.4v to 1.4v table 3-106 timings for 1.8v imager, 3. 3v5% pad power supply, ttl input level (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationflash target parameters data sheet 3-445 v 1.1 2015-05 3.34 flash target parameters program flash program and erase operation is only allowed up the t j = 150c. flash timing parameter are valid for f fsi =100mhz. table 3-107 flash parameter symbol values unit note / test condition min. typ. max. program flash erase time per logical sector t erp cc - - 1 s cycle count < 1000 - 0.207 + 0.003 * ( s [kbyte]) / ( f fsi [mhz]) 1) - s cycle count < 1000, for sector of size s program flash erase time per multi-sector command t merp cc - - 1 s for consecutive logical sectors in a physical sector, cycle count < 1000 - 0.207 + 0.003 * ( s [kbyte]) / ( f fsi [mhz]) 1) - s for consecutive logical sector range of size s in a physical sector, cycle count < 1000 program flash program time per page in 5 v mode t prp5 cc - - 50 + 3000/( f fsi [mhz]) s 32 byte program flash program time per page in 3.3 v mode t prp3 cc - - 81 + 3400/( f fsi [mhz]) s 32 byte program flash program time per burst in 5 v mode t prpb5 cc - - 125 + 9500/( f fsi [mhz]) s 256 byte program flash program time per burst in 3.3 v mode t prpb3 cc - - 410 + 12000/( f f si [mhz]) s 256 byte program flash program time for 1 mbyte with burst programming in 5 v mode excluding communication t prpb5_1mb cc - - 0.9 s derived value for documentation purpose, valid for f fsi = 100mhz program flash program time for complete pflash with burst programming in 5 v mode excluding communication t prpb5_pf cc - - 7.2 s derived value for documentation purpose, valid for f fsi = 100mhz write page once adder t add cc - - 15 + 500/( f fsi [mhz]) s adder to program time when using write page once tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationflash target parameters data sheet 3-446 v 1.1 2015-05 program flash suspend to read latency t spndp cc - - 12000/( f f si [mhz]) s for write burst, verify erased and for multi- (logical) sector erase commands data flash erase time per sector 2) t erd cc - 0.12 + 0.08/( f fsi [mhz]) 1) - s cycle count < 1000 -0.57 + 0.15/( f fsi [mhz]) 1) 0.928 + 0.15/( f fsi [mhz]) s cycle count < 125000 data flash erase time per multi-sector command 2) t merd cc - 0.12 + 0.01 * ( s [kbyte]) / ( f fsi [mhz]) 1) - s for consecutive logical sector range of size s, cycle count < 1000 -0.57 + 0.019 * ( s [kbyte]) / ( f fsi [mhz]) 1) 0.928 + 0.019 * ( s [kbyte]) / ( f fsi [mhz]) s for consecutive logical sector range of size s, cycle count < 125000 data flash erase disturb limit n dfd cc - - 50 cycles program time data flash per page 3) t prd cc - - 50 + 2500/( f fsi [mhz]) 3) s 8 byte complete device flash erase time pflash and dflash 4) t er_dev cc - - 17 s derived value for documentation purpose (excl. ucbs and hsms), valid for f fsi = 100mhz data flash program time per burst 3) t prdb cc - - 96 + 4400/( f fsi [mhz]) 3) s 32 bytes data flash suspend to read latency t spndd cc - - 12000/( f f si [mhz]) s wait time after margin change t fl_margindel cc --10 s program flash retention time, sector t ret cc 20 - - years max. 1000 erase/program cycles data flash endurance per eepromx sector 5) n e_eep10 cc 125000 - - cycles max. data retention time 10 years data flash endurance per hsmx sector 5) n e_hsm cc 125000 - - cycles max. data retention time 10 years table 3-107 flash (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationflash target parameters data sheet 3-447 v 1.1 2015-05 ucb retention time t rtu cc 20 - - years max. 100 erase/program cycles per ucb, max 400 erase/program cycles in total data flash access delay t df cc - - 100 ns see pmu_fcon.wsdfla sh data flash ecc delay t dfecc cc - - 20 ns see pmu_fcon.wsecd f program flash access delay t pf cc - - 30 ns see pmu_fcon.wspfla sh program flash ecc delay t pfecc cc - - 10 ns see pmu_fcon.wsecp f number of erase operations on df0 over lifetime n erd0 cc - - 750000 cycles number of erase operations on df1 over lifetime n erd1 cc - - 500000 cycles junction temperature limit for pflash program/erase operations t jpflash sr - - 150 c 1) all typical values were characterised, but are not tested. typical values are safe median values at room temperature 2) under out-of-spec conditions (e.g. over-cycling) or in case of activation of wl oriented defects, the duration of erase processes may be increased by up to 50%. 3) time is not dependent on program mode (5v or 3.3v). 4) using 512 kbyte erase commands. 5) only valid when a robust eeprom emulation algorithm is used. for more details see the users manual. table 3-107 flash (cont?d) parameter symbol values unit note / test condition min. typ. max. tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpackage outline data sheet 3-448 v 1.1 2015-05 3.35 package outline figure 3-35 package outlines lf-bga-292-6 figure 3-36 package outlines pg-bga-416-26 co de standoff a b c d e f g h j k 1 2 3 4 5 6 7 8 9 10 i ndex marking (lasered ) index marking 0. 1 c 11 12 l m 13 14 pn seatin g plan e 0. 8 18 15 17 16 20 19 r t u v w y coplanarity 292 x 0. 15 0. 08 m c 0. 15 m c a b 292 x c a b 17 0 .1 17 0. 1 0. 33 mi n 1.7 max 0.5 0 . 0 5 19 x 0. 8 = 15 .2 0.8 19 x 0 .8 = 1 5. 2 27 27 a b c d e f g h j k l m n p r t u v w y 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 416 x 0,41 min co de 0. 15 coplanarity 416 x a b i ndex marki ng 2x 2x c 21 22 23 24 25 26 ac af ae ad ab aa c 0. 1 c seatin g pl ane 0.25 m c a b 0. 1 m c stand off 0. 1 d d (lasered ) 0.1 (0.56) 2 .15 max (0.95) 25 x 1 .0 = 25 0. 63 -0 .1 3 +0.07 1.0 1. 0 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpackage outline data sheet 3-449 v 1.1 2015-05 figure 3-37 package outlines pg-lfbga-516-5 you can find all of our packages, sorts of packing and others in our infineon internet page ?products?: http://www.infineo n.com/products. 3.35.1 package parameters 3.35.2 tc290 carrier tape table 3-108 thermal characteristics of the package device package rqjct 1) 1) the top and bottom thermal resistances between the case and the ambient ( r tcat , r tcab ) are to be combined with the thermal resistances between the junction and the case given above ( r tjct , r tjcb ), in order to calculate the total thermal resistance between the junction and the ambient ( r tja ). the thermal resistances between the case and the ambient ( r tcat , r tcab ) depend on the external system (pcb, case) characteristics, and are under user responsibility. the junction temperature can be calc ulated using the following equation: t j = t a + r tja * p d , where the r tja is the total thermal resistance between the junction and the am bient. this total junction ambient resistance r tja can be obtained from the upper four partial thermal resistances. thermal resistances as measured by the ?cold plate method? (mil spec-883 method 1012.1). rqjcb 1) rqja unit note TC297 lf-bga-292-6 3,0 4,3 15,1 k/w tc298 pg-bga-416-26 2,9 5,4 12,8 k/w tc299 pg-lfbga-516-5 2,8 4,3 15,1 k/w 25 25 516x 0,3 min co de 0.15 coplanarity 516 x a b i ndex marki ng 2x 2x c 0. 1 c seatin g pl ane 0.15 m c a b 0. 08 m c stand off 0.1 d d (lasered ) 0.1 1.7 max 29 x 0.8 = 23.2 0. 5 0.8 0. 8 a b c d e f g h j k 1 2 3 4 5 6 7 8 9 10 11 12 l m 13 14 pn 18 15 17 16 20 19 r t u v w y aa ab ac ad ae af ag ah aj ak 21 22 23 24 25 26 27 28 29 30 0 . 1 0.1 0.05 29 x 0.8 = 23.2 0. 8 index marking tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificationpackage outline data sheet 3-450 v 1.1 2015-05 figure 3-38 carrier tape dimenions table 3-109 tc290 chip dimenions device a b t tc290 8,806 mm 9,392 mm 0,3 mm tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step electrical specificati onquality declarations data sheet 3-451 v 1.1 2015-05 3.36 quality declarations table 3-110 quality parameters parameter symbol values unit note / test condition min. typ. max. operation lifetime t op - - 24500 hour esd susceptibility according to human body model (hbm) v hbm - - 2000 v conforming to jesd22-a114-b esd susceptibility of the lvds pins v hbm1 - - 500 v esd susceptibility according to charged device model (cdm) v cdm - - 500 v for all other balls/pins; conforming to jesd22-c101-c - - 750 v for corner balls/pins; conforming to jesd22-c101-c moisture sensitivity level msl - - 3 conforming to jedec j-std--020c for 240c tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-452 v 1.1 2015-05 4 history version 0.6 is the first version of this document. 4.1 changes from version version 0.6 to 0.71 ? changes in table 'timings for 1.8v imager, 3.3v +-5% pad power supply, ttl input level' of cif ? add min 3.5 ns to t 72 ? add min 3.5 ns to t 74 ? add min 3 ns to t 71 ? add min 3 ns to t 73 ? add min 3.5 ns to t 71 ? add min 3.5 ns to t 73 ? add min 4 ns to t 74 ? add min 5 ns to t 72 ? add min 4 ns to t 72 ? add min 5 ns to t 74 ? add min 10.42 ns to t 70 ? add min 9 ns to t 71 ? add min 10 ns to t 72 ? add min 9 ns to t 73 ? add min 10 ns to t 74 ? add min 4.5 ns to t 71 ? add min 4.5 ns to t 73 ? changes in table 'timings for 0.4v to 2.4v input si gnals (2.8v imager), +-5% pad power supply' of cif ? add min 3.5 ns to t 74 ? add min 3 ns to t 71 ? add min 3 ns to t 73 ? add min 3.5 ns to t 72 ? add min 5 ns to t 74 ? add min 10.42 ns to t 70 ? add min 9 ns to t 71 ? add min 10 ns to t 72 ? add min 9 ns to t 73 ? add min 10 ns to t 74 ? add min 4.5 ns to t 71 ? add min 4.5 ns to t 73 ? add min 5 ns to t 72 ? changes in table 'timings for 1.8v imager, ttl input level' of cif ? add min 3 ns to t 71 ? add min 3.5 ns to t 74 ? add min 3.5 ns to t 72 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-453 v 1.1 2015-05 ? add min 3 ns to t 73 ? add min 3.5 ns to t 71 ? add min 3.5 ns to t 73 ? add min 4 ns to t 74 ? add min 4.5 ns to t 73 ? add min 10.42 ns to t 70 ? add min 5 ns to t 74 ? add min 5 ns to t 72 ? add min 4 ns to t 72 ? add min 9 ns to t 71 ? add min 10 ns to t 72 ? add min 9 ns to t 73 ? add min 10 ns to t 74 ? add min 4.5 ns to t 71 ? changes in table 'timings for 0.4v to 2.4v input signals (2.8v imager)' of cif ? add min 3.5 ns to t 72 ? add min 3.5 ns to t 74 ? add min 3 ns to t 71 ? add min 3 ns to t 73 ? add min 5 ns to t 72 ? add min 5 ns to t 74 ? add min 10.42 ns to t 70 ? add min 9 ns to t 71 ? add min 10 ns to t 72 ? add min 9 ns to t 73 ? add min 10 ns to t 74 ? add min 4.5 ns to t 73 ? add min 4.5 ns to t 71 ? changes in table 'timings for 5v' of cif ? change name of t imings for 5v from timings for 5v+-10% pad power supply to timings for 5v ? changes in table 'timings for 3.3v' of cif ? change name of t imings for 3.3v from timings for 3.3v+-10% pad power supply to timings for 3.3v ? power supply ? change note of pd from 'max power pattern ; adas devices' to 'max power pattern ; valid for feature package ta and tb products' ? change max value of pd from 985 mw to 2310 mw ? change max value of pd from 1670 mw to 1700 mw ? change note of i ddtot from 'real power pattern . adas devices' to 'real power patter n . valid for feature package ta and tb products' ? add max 840 ma to i ddtot ? change note of pd from 'max power pattern' to 'max power pattern. valid for feature package t, tp, tc, tx, and ty products' tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-454 v 1.1 2015-05 ? change max value of pd from 2030 mw to 2140 mw ? change note of pd from 'real power pattern' to 'real power pattern. valid for feature package t, tp, tc, tx, and ty products' ? change max value of pd from 1575 mw to 1600 mw ? change max value of i ddfl3 from 75 ma to 84 ma ? change note of i ddporst from '' to 'valid for feature packag e t, tp, tc, tx, and ty products' ? change max value of i ddm from 73 ma to 62 ma ? change max value of i sleep from 20 ma to 24 ma ? change note of i dd from 'max power pattern' to 'max power pattern. valid for feature package t, tp, tc, tx, and ty products' ? change note of i dd from 'real power pattern' to 'real power pa ttern. valid for featur e package t, tp, tc, tx, and ty products' ? change max value of i ddamu from 52 ma to 48 ma ? change max value of i extrail from 99 ma to 98 ma ? change note of i ddtot from 'real power pattern' to 'real power pattern. valid for feature package t, tp, tc, tx, and ty products' ? add footnote 'in case evr33 is not used, injection cu rrent into 3.3v vddp3 supply rail with active sink on 5v vext rail should be limited to 50 0 ma if during power sequencing 3.3v is supplied before 5v by external regulator.' to i ddx3rail ? change max value of i ddc10 from 54 ma to 62 ma ? change max value of i ddc11 from iddc10 + 50 ma to iddc10 + 48 ma ? change max value of i ddc20 from 50 ma to 60 ma ? change max value of i ext/flex from 6 ma to 16 ma ? change note of i ddporst from 'valid for sak- tc29xta-... products' to 'valid for feat ure package ta and tb products' ? change note of i ddporst from '' to 'valid for feature packag e t, tp, tc, tx, and ty products' ? change max value of i ddm from 46 ma to 52 ma ? change note of i ddporst from 'valid for sak- tc29xta-... products' to 'valid for feat ure package ta and tb products' ? change note of i ddporst from '' to 'valid for feature packag e t, tp, tc, tx, and ty products' ? change note of i ddporst from 'valid for sak- tc29xta-... products' to 'valid for feat ure package ta and tb products' ? change max value of i ddm from 27 ma to 10 ma ? change max value of i ddm from 80 ma to 100 ma ? change max value of i ddm from 51 ma to 20 ma ? update footnote of power supply to ' a single converter instanc e of vadc unit consumes 2 ma.' ? change note of i dd from 'max power pattern with f sri/cpux = 270 mhz with v dd = 1.235v + 7.5%' to 'max power pattern with f sri/cpux = 270 mhz with v dd = 1.235v + 7.5%; valid for feature package t, tp, and tc products' ? change note of i dd from 'max power pattern. valid for feature package t, tp, tc, tx, and ty products' to 'max power pattern. valid for feature package t, tp, and tc products' ? change note of pd from 'real power pattern. valid for feature package t, tp, tc, tx, and ty products' to 'real power pattern. valid for feature package t, tp, and tc products' tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-455 v 1.1 2015-05 ? change note of i ddporst from 'valid for feature package t, tp, tc, tx, and ty products' to 'valid for feature package t, tp, and tc products' ? change note of i ddm from 'real power pattern; sum of currents of dsadc and vadc modules' to 'real power pattern; sum of currents of dsadc and vadc modules' ? change note of i sleep from 'all cpus in idle, all peripherals in sleep, f sri/spb = 1 mhz via lpdiv divider; t j = 25 c ' to 'all cpus in idle, all peripherals in sleep, f sri/spb = 1 mhz via lpdiv divider; t j = 25 c ; valid for feature package t, tp, and tc products' ? change max value of i dd from 880 ma to 900 ma ? change note of i dd from 'max power pattern. valid for feature package ta and tb products' to 'max power pattern. valid for feature package ta, tb, tx, and ty products' ? change note of pd from 'max power pattern ; valid for feature package ta and tb products' to 'max power pattern ; valid for feature package ta, tb, tx, and ty products' ? add max 26 ma to i sleep ? change note of i sleep from 'all cpus in idle, all peripherals in sleep, f sri/spb = 1 mhz via lpdiv divider; t j = 25 c ; valid for da product variant' to 'all cp us in idle, all peripherals in sleep, f sri/spb = 1 mhz via lpdiv divider; t j = 25 c ; valid for feature package ta, tb, tx, and ty products' ? change max value of i sleep from 19 ma to 26 ma ? change note of i ddporst from 'valid for feature package t, tp, tc, tx, and ty products' to 'valid for feature package t, tp, and tc products' ? change note of i ddm from 'current for dsadc mo dule only; 50% dsadc channels active at a time' to 'current for dsadc module only; 50% dsadc channels active.' ? change note of i ddporst from 'valid for feature package ta and tb products' to 'valid for feature package ta, tb, tx, and ty products' ? change note of i ddporst from 'valid for feature package t, tp, tc, tx, and ty products' to 'valid for feature package t, tp, and tc products' ? change note of i ddporst from 'valid for feature package ta and tb products' to 'valid for feature package ta, tb, tx, and ty products' ? operating conditions ? update footnote of operating conditions to 'the sum of f cpu0 + f cpu1 + f cpu2 have to be below 803 mhz for all feature packages t, tp, tc,tx, and ty. for details see aurix tc29x variants. this is to limit the current consumption, v dd , and t a .' ? add max 200 mhz to f ebu ? add footnote 'all v ddp3 pins shall be connected together externally on the pcb.' to v ddp3 ? change description of v ddp3 from 'digital supply voltage for lvdsh and a2 apds' to 'digital supply voltage for lvdsh and a2 pads' ? change description of v ddp3 from 'digital supply voltage for lvdsh and a2 apds' to 'digital supply voltage for lvdsh and a2 pads' ? change min value of v ddppa from 0.7 v to 0.72 v ? add max 180 mhz to f ebu ? remove footnote of operating conditions to 'the sum of f cpu0 + f cpu1 + f cpu2 have to be below 803 mhz for all feature packages t, tp, tc,tx, and ty. for de tails see aurix tc29x variants. this is to limit the current consumption, v dd , and t a . ? add min 2.97 v to v ebu ? add max 3.63 v to v ebu ? add typ 3.3 v to v ebu tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-456 v 1.1 2015-05 ? add min 4.5 v to v flexe ? add parameter v flexe ? change description of v flexe from 'digital supply voltage for extend ed flex port' to 'digital supply voltage for ebu flex port' ? add min 2.97 v to v flexe ? add max 5.5 v to v flexe ? add max 4.5 v to v flexe ? add typ 3.3 v to v flexe ? add typ 5.0 v to v flexe ? changes in table 'class f' of standard_pads ? remove footnote ' v ilx = 0.25 * v ddp3 - 0.058v' from v ilf ? add footnote ' v ilx = 0.25 * v ddp3 + 0.058v' to v ilf ? changes in table 'class mpr 5v' of standard_pads ? change min value of hysmpr from 0.1 * v ext/flex v to 0.09 * v ext/flex v ? change min value of hysmpr from 0.08 * v ext/flex v to 0.075* v ext/flex v ? changes in table 'class i 5v' of standard_pads ? change min value of hysi from 0.08 * v ext/flex v to 0.075 * v ext/flex v ? change max value of v ilhi from 2.85 v to 3.0 v ? change min value of hysi from 0.1 * v ext/flex v to 0.09 * v ext/flex v ? change min value of hysi from 0.073 * v ext/flex v to 0.07 * v ext/flex v ? changes in table 'class a2' of standard_pads ? remove footnote ' v ilx = 0.25 * v ddp3 - 0.058v' from v ila2 ? add footnote ' v ilx = 0.25 * v ddp3 + 0.058v' to v ila2 ? changes in table 'class i 3.3v' of standard_pads ? change min value of hysi from 0.047 * v ext/flex v to 0.045 * v ext/flex v ? changes in table 'class mp 5v' of standard_pads ? change max value of v ilhmp from 2.85 v to 3.0 v ? change min value of hysmp from 0.1 * v ext/flex v to 0.09 * v ext/flex v ? change min value of hysmp from 0.08 * v ext/flex v to 0.075 * v ext/flex v ? changes in table 'class lp 5v' of standard_pads ? change min value of hyslp from 0.1 * v ext/flex v to 0.09 * v ext/flex v ? change min value of hyslp from 0.08 * v ext/flex v to 0.075 * v ext/flex v ? change max value of v ilhlp from 2.85 v to 3.0 v ? changes in table 'class mp+ 5v' of standard_pads ? change min value of hysmpp from 0.1 * v ext/flex v to 0.09 * v ext/flex v ? change max value of v ilhmpp from 2.85 v to 3.0 v ? change min value of hysmpp from 0.08 * v ext/flex v to 0.075 * v ext/flex v ? add footnote 'for currents smaller than the i ol/oh from the test condition th e defined max. value stays unchanged.' to r dsonmprw ? add footnote 'for currents smaller than the i ol/oh from the test condition th e defined max. value stays unchanged.' to r dsonmprm tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-457 v 1.1 2015-05 ? add footnote 'for currents smaller than the i ol/oh from the test condition th e defined max. value stays unchanged.' to r dsonmprs ? add footnote 'rise / fall times are defined 10% - 90% of v ext/flex .' to t mpr ? changes in table 'lvdsh - reduced tx and rx (red)' of lvdsh ? change description of t fall from 'fall time (10% - 90%)' to 'fall time' ? change description of t rise from 'rise time (10% - 90%)' to 'rise time' ? change description of t fall from 'fall time (10% - 90%)' to 'fall time' ? change description of t rise from 'rise time (10% - 90%)' to 'rise time' ? change note of v od from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of v os from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of v os from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of v os from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of v od from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of t rise from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of t fall from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of v ol from 'rt = 100 ohm +/- 20%' to 'rt = 100 ohm 20%' ? change note of v oh from 'rt = 100 ohm +/- 20%' to 'rt = 100 ohm 20%' ? change note of t rise from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of v od from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? change note of t fall from 'rt = 100 ohm +/- 20% @2pf' to 'rt = 100 ohm 20% @2pf' ? changes in table 'lvdsh - ieee standar d lvds reduced link (redl)' of lvdsh ? change description of t rise10 from 'vod rise time (10% - 90%)' to ' v od rise time' ? change description of t fall10 from 'vod fall time (10% - 90%)' to ' v od fall time' ? change note of v oh from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v os from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of t rise10 from 'zl = 100 ohm +/- 5% @ 2pf' to 'zl = 100 ohm 5% @ 2pf' ? change note of t fall10 from 'zl = 100 ohm +/- 5% @ 2p f' to 'zl = 100 ohm 5% @ 2pf' ? change note of v od from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of dvod from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v os from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of dvos from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v ol from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v od from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? changes in table 'lvdsh - ieee standard lvds general pur pose link (gpl)' of lvdsh ? change description of t rise20 from 'rise time (20% - 80%)' to 'rise time' ? change description of t fall20 from 'fall time (20% - 80%)' to 'fall time' ? add footnote 'rise / fall times are defined for 20% - 80% of v od ' to t rise20 ? add footnote 'rise / fall times are defined for 10% - 90% of v od ' to t rise ? add footnote 'rise / fall times are defined for 20% - 80% of v od ' to t fall20 ? add footnote 'rise / fall times are defined for 10% - 90% of v od ' to t rise10 ? add footnote 'rise / fall times are defined for 10% - 90% of v od ' to t fall10 ? add footnote 'rise / fall times are defined for 10% - 90% of v od ' to t fall tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-458 v 1.1 2015-05 ? change note of v i from 'driver ground potential difference < 925 mv; rt = 100 ohm +/- 20%' to 'driver ground potential difference < 925 mv; rt = 100 ohm 20%' ? change note of t fall20 from 'zl = 100 ohm +/- 5% @ 2 pf' to 'zl = 100 ohm 5% @ 2 pf' ? change note of v os from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v od from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of dvod from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of dvos from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v os from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of t rise20 from 'zl = 100 ohm +/- 5% @2 pf' to 'zl = 100 ohm 5% @2 pf' ? change note of v oh from 'rt = 100 ohm +/- 5% (400 mv/2) + 1275 mv' to 'rt = 100 ohm 5% (400 mv/2) + 1275 mv' ? change note of v i from 'driver ground potential difference < 925 mv; rt = 100 ohm +/- 20%' to 'driver ground potential difference < 925 mv; rt = 100 ohm 20%' ? change note of v ol from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v od from 'rt = 100 ohm +/- 5%' to 'rt = 100 ohm 5%' ? change note of v i from 'driver ground potential difference < 925 mv; rt = 100 ohm +/- 10%' to 'driver ground potential difference < 925 mv; rt = 100 ohm 10%' ? change note of v i from 'driver ground potential difference < 925 mv; rt = 100 ohm +/- 10%' to 'driver ground potential difference < 925 mv; rt = 100 ohm 10%' ? vadc_33v ? change typ value of q conv from 60 pc to 7 pc ? change typ value of q conv from 15 pc to 3 pc ? change max value of t bwr from 50 cycles to 60 cycles ? change t bwr from typ to max ? add min 0 pc to q conv ? add min 4 pc to q conv ? add max 15 pc to q conv ? add max 8 pc to q conv ? change note of i oz2 from '' to ' v arefx = v aref2 ' ? change description of i oz2 from 'positive reference pin leakage' to 'positive reference v arefx pin leakage' ? change note of i oz2 from '' to ' v arefx = v aref2 ' ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? change description of i oz3 from 'negative reference pin le akage' to 'negative reference v agndx pin leakage' ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? change max value of t bwg from 50 cycles to 120 cycles ? change predicate of t bwg from typ to max ? add min -2 a to i oz3 ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? add max 2 a to i oz3 ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? add min -2 a to i oz2 ? change note of i oz2 from '' to ' v arefx = v aref2 ' ?add ' v arefx = v aref2 ' t j =150 c to t j tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-459 v 1.1 2015-05 ?add ' v arefx = v aref2 ' t j =150 c to t j ? add max 2 a to i oz2 ? change note of i oz2 from '' to ' v arefx = v aref2 ' ? add footnote 'this parameter is valid for soldered dev ices and requires careful analog board design.' to enrms ? change note of tue from '12-bit resolution ' to '12-bit resolution; t j 150 c' ? change note of tue from '12-bit resolution ' to '12-bit resolution; t j 150 c' ? change note of ea dnl from '' to '12-bit resolution' ? change note of ea dnl from '' to '12-bit resolution' ? change note of ea inl from '' to '12- bit resolution; t j 150 c' ? change note of ea inl from '' to '12- bit resolution; t j 150 c' ? change note of ea off from '' to '12- bit resolution; t j 150 c' ? change note of ea off from '' to '12- bit resolution; t j 150 c' ? change note of ea gain from '' to '12-bit resolution; t j 150 c' ? change note of ea gain from '' to '12-bit resolution; t j 150 c' ? change note of q conv from ' v ain = 3.3v, charge consumed from reference pin, precharging disabled' to ' v ain = 3.3 v, charge consumed from re ference pin, precharging disabled' ? change note of q conv from ' v ain = 3.3v, charge consumed from reference pin, precharging enabled' to ' v ain = 3.3 v, charge consumed from re ference pin, precharging enabled' ? add min -12 lsb to tue ? add max 12 lsb to tue ? add min -12 lsb to ea inl ? add max 12 lsb to ea inl ? add min -6 lsb to ea off ? add max 6 lsb to ea off ? add min -6 lsb to ea gain ? add max 6 lsb to ea gain ? add min -6 a to i oz2 ? add min -3.5 a to i oz2 ? add max 6 a to i oz2 ? add max 3.5 a to i oz2 ? add min -6.5 a to i oz3 ? add min -12 a to i oz3 ? add max 6.5 a to i oz3 ? add max 12 a to i oz3 ? add max 10 % to dvcsd ? add max 28 kohm to r csd ? add min v ssm v to v agnd ? add min v ssm v to v agnd ? evr/dcdc ? update footnote of dcdc to 'incase of tc29x runni ng with fsri = 300 mhz, it shall be ensured that the vdd operating range is limited to 1. 235v upto 1.430v. the dcdc may be configured in this case with a tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-460 v 1.1 2015-05 nominal voltage of 1.33v + - 7.5%. t he static accuracy and regulation par ameter ranges remain also valid for this case.' ? update footnote of dcdc to 'incase of tc29x runni ng with fsri = 300 mhz, it shall be ensured that the vdd operating range is limited to 1. 235v upto 1.430v. the dcdc may be configured in this case with a nominal voltage of 1.33v7.5%. the static accuracy a nd regulation parameter ranges remain also valid for this case.' ? changes in table 'evr13 smps ex ternal components' of evr/dcdc ? change name of c outdc from cdc to coutdc ? add footnote 'incase of tc29x runn ing with fsri = 300 mhz, it shall be ensured that the vdd operating range is limited to 1.235v upto 1.430v. the dcdc may be configured in this case with a nominal voltage of 1.33v + - 7.5%. the static accuracy and regulation parameter ranges remain also valid for this case.' to v dd_dc ? remove footnote 'it is recommended to place the flying capacitor close to the pins without vias to have minimal routing resistance from pin to the c apacitor terminal of less than 25mohm.' from c fly ? add footnote 'capacitor min-max range represent ty pical +-35% tolerance including dc bias effect. the trace resistance from the capacitor to the supply or ground rail should be limited to 25 mohm.' to c fly ? add footnote 'capacitor min-max range represent ty pical +-35% tolerance including dc bias effect. the trace resistance from the capacitor to the supply or ground rail should be limited to 25 mohm.' to c outdc ? add footnote 'incase of smps mode, it shall be ensured that the vdd output pin shall be connected on pcb level to all other v dd input pins.' to v dddc ? evr/back-up clock ? add footnote 'all v ext pins shall be connected togethe r externally on the pcb.' to v ext ? vadc ? add min 0 pc to q conv ? add min 8 pc to q conv ? add max 20 pc to q conv ? add max 10 pc to q conv ? change max value of t bwr from 50 cycles to 60 cycles ? change predicate of t bwr from typ to max ? change max value of t bwg from 50 cycles to 120 cycles ? change t bwg from typ to max ? change note of i oz2 from '' to ' v arefx = v aref2 ' ? change note of i oz2 from '' to ' v arefx = v aref2 ' ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? change typ value of q conv from 20 pc to 3 pc ? change typ value of q conv from 80 pc to 14 pc ?add ' v arefx = v aref2 ' t j =150 c to t j ? add min -2 a to i oz2 ? change note of i oz2 from '' to ' v arefx = v aref2 ' ?add ' v arefx = v aref2 ' t j =150 c to t j ? add max 2 a to i oz2 ? change note of i oz2 from '' to ' v arefx = v aref2 ' ? add min -2.5 a to i oz3 tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-461 v 1.1 2015-05 ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? add max 2.5 a to i oz3 ? change note of i oz3 from '' to ' v agndx = v agnd2 ' ? change note of q conv from ' v ain = 5v, charge consumed from reference pin, precharging enabled' to ' v ain = 5 v, charge consumed from reference pin, precharging enabled' ? change note of q conv from ' v ain = 5v, charge consumed from reference pin, precharging disabled' to ' v ain = 5 v, charge consumed from reference pin, precharging disabled' ? change max value of en rms from 0.5 lsb to 0.75 lsb ? change note of r ain from 'valid for analoge inputs mapped to gp ios' to 'valid for analog inputs mapped to gpios' ? add min -4 a to i oz2 ?add v aref = v ddm v to v aref ? add min -7 a to i oz2 ?add v aref = v ddm v to v aref ? add max 7 a to i oz2 ? add max 4 a to i oz2 ? add min -7 a to i oz3 ? add min -13 a to i oz3 ? add max 7 a to i oz3 ? add max 13 a to i oz3 ? add typ 0.5 lsb to en rms ? changes in table 'master mode timing, lvdsm output pads for data and clock' of qspi/3.3v ? change min value of t 52 from 37 ns to 20 ns ? dsadc_33v ? change max value of ed gain from 0.1 % to 0.2 % ? change min value of ed gain from -0.1 % to -0.2 % ? change note of snr from ' f pb = 30khz' to ' f pb = 30khz; v ddm = 5%' ? change note of snr from ' f pb = 50khz' to ' f pb = 50khz; v ddm = 5%' ? change note of snr from ' f pb = 100khz' to ' f pb = 100khz; v ddm = 5%' ? change note of snr from ' f pb = 30khz' to ' f pb = 30khz; v ddm = 5%' ? change note of sba from '1,5 ... 2 f d ' to '1.5 ... 2 f d ' ? change note of sba from '0,5 ... 1 f d ' to '0.5 ... 1 f d ' ? change note of snr from ' f pb = 100khz' to ' f pb = 100khz; v ddm = 5%' ? change note of snr from ' f pb = 50khz' to ' f pb = 50khz; v ddm = 5%' ? change note of sba from '2,5 ... osr/2 f d ' to '2.5 ... osr/2 f d ' ? change note of sfdr from 'vcm = 2.2v, dc coupled' to ' v cm = 2.2 v, dc coupled; v ddm = 5%' ? changes in table 'receive parameters' of eray ? change description of t dcctxasymaccept15 from 'acceptance of asymmetriy at receiving part' to 'acceptance of asymmetry at receiving part' ? change description of t dcctxasymaccept25 from 'acceptance of asymmetriy at receiving part' to 'acceptance of asymmetry at receiving part' ? change description of t dcctxasymaccept15 from 'acceptance of asymmetriy at receiving part' to 'acceptance of asymmetry at receiving part' tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-462 v 1.1 2015-05 ? change description of t dcctxasymaccept25 from 'acceptance of asymmetriy at receiving part' to 'acceptance of asymmetry at receiving part' ? absolute maximum ratings ? change note of t st from 'upto 65h @ t j = 150c' to 'upto 65h @ t j = 150c; upto 15h @ t j = 170c' ? change max value of t st from 150 c to 170 c ? reset timings ? add footnote 'the timing values assumes pr ogrammed bmi with esr0cnt inactive.' to t bp ? add footnote 'the timing values assumes pr ogrammed bmi with esr0cnt inactive.' to t b ? changes in table 'overload parameters' of overload ? change note of k ovdn from 'overload injected on lvds pad and affecting neighbor lvds pad' to 'overload injected on lvds pad and affecting neighbor lvds pads' ? change note of k ovdn from 'overload injected on gpio non lvds pad and affecting neighbor gpio non lvds pad' to 'overload injected on gpio non lvds pad and affecting neighbor lp and a2 (exept p24.x and p25.x) pads; -2ma < i in < 0ma' ? change note of k ovdp from 'overload injected on lvds pad and affecting neighbor lvds pad' to 'overload injected on lvds pad and affecting neighbor lvds pads' ? change note of k ovdp from 'overload injected on gpio non lvds pad and affecting neighbor gpio non lvds pad' to 'overload injected on gpio non lvds pad and affecting neighbor gpio non lvds pads' ? change max value of k ovdn from 0.9 to 0.93 ? change note of k ovdn from 'coupling between pads 21.2 and 21.3' to 'coupling between pads 21.0, 21.1,21.2 and 21.3' ? change note of k ovdn from 'overload injected on gpio non lvds pad and affecting neighbor gpio non lvds pad' to 'overload injected on gpio non lvds pad and affecting neighbor lp and a2 pads; -2ma < i in < 0ma' ? change max value of k ovdn from 1.5*10 -3 to 6*10 -4 ? add max 1.7*10 -3 to k ovdn ? add max 2*10 -2 to k ovdn ? add max 1*10 -2 to k ovdn ? change note of k ovdn from 'overload injected on gpio non lvds pad and affecting neighbor lp and a2 pads; -5ma < i in < -2ma' to 'overload injected on gpio non lvds pad and affecting neighbor lp and a2 pads (exept p25.2 and p25.4); -5ma < i in < -2ma' ? add max 1.6*10 -4 to k ovdp ? change max value of k ovdp from 1*10 -4 to 1.6*10 -4 ? change note of v ous from 'valid for lp, mp, mp+, and mpr pads' to 'limited to 60h ov er lifetime; valid for lp, mp, mp+, and mpr pads' ? change note of k ovap from 'else' to '' ? change max value of k ovan from 1*10 -3 to 6*10 -4 ? add max 1*10 -4 to k ovdp ? change note of k ovdp from 'overload injected on gpio pad and affecting neighbor p32.4 pad' to 'overload injected on gpio pad and affecting neighbor p32.4 and p33.12 pad' ? add max 1.4*10 -2 to k ovdn ? add max 4*10 -3 to k ovdn ? add 3*10 -3 nounit to overload parameters ? change note of k ovan from 'else' to 'else; -1ma < i in < 0ma' tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-463 v 1.1 2015-05 ? change note of k ovap from '' to '5ma < i in < 0ma' ? change note of k ovan from 'analog inputs overlaid with class lp pads or pull down diagnostics' to 'analog inputs overlaid with class lp pads or pull down diagnostics; -1ma < i in < 0ma' ? change max value of k ovdn from 1.4*10 -2 to 1.5*10 -2 ? add max 3*10 -3 to k ovan ?dsadc ? change description of i oz5 from 'positive reference pin le akage' to 'positive reference v aref1 pin leakage' ? change description of i oz6 from 'negative reference pin leakage' to 'negative reference v agnd1 pin leakage' ? change min value of ed gain from -0.1 % to -0.2 % ? change max value of ed gain from 0.1 % to 0.2 % ? change min value of ed off from -350 mv to -100 mv ? add max 100 mv to ed off ? change typ value of ed off from -150 mv to mv ? change note of snr from ' f pb = 30khz' to ' f pb = 30 khz; v ddm = 5%' ? change min value of snr from 76 db to 80 db ? change note of snr from ' f pb = 50khz' to ' f pb = 50 khz; v ddm = 5%' ? change min value of snr from 74 db to 78 db ? add footnote 'single-ended mode reduces the snr by 6 db if the unused input is grounded, by 3 db if the unused input connects to v cm (gain = 2).' to snr ? remove footnote 'single-ended mode reduces the snr by 6 db if the unused input is grounded, by 3 db if the unused input connects to v cm (gain = 2).' from snr ? change min value of ed gain from -5 % to -3.5 % ? change max value of ed gain from 5 % to 3.5 % ? change note of r dain from 'exact value (+-1%) av ailable in ucb' to 'exact va lue (1%) available in ucb' ? add footnote 'the variation of the impedance between different channels is < 1.5%.' to r dain ? change note of r dain from 'exact value (+-1%) av ailable in ucb' to 'exact va lue (1%) available in ucb' ? change note of r dain from 'exact value (+-1%) av ailable in ucb' to 'exact va lue (1%) available in ucb' ? change note of snr from ' f pb = 100khz' to ' f pb = 100 khz; v ddm = 5%' ? change min value of snr from 69 db to 74 db ? remove footnote '10 khz only with 10mhz modulator clock frequency reachable' from f pb ? add footnote '10 khz only reachable with 10 mhz modulator clock frequency.' to f pb ? change note of sba from '1,5 ... 2 f d ' to '1.5 ... 2 f d ' ? remove footnote 'derating factors: -2 db in standard-performance mode. -3 db for cmv = 10 b , i.e. v cm = ( v aref 2%) / 2.0.' from sba ? add footnote 'cic3, fir0, fir1 filters enabled.' to sba ? change note of sba from '2,5 ... osr/2 f d ' to '2.5 ... osr/2 f d ' ? change note of sba from '0,5 ... 1 f d ' to '0.5 ... 1 f d ' ? change note of sfdr from 'vcm = 2.2v, dc coupled' to ' v cm = 2.2 v, dc coupled; v ddm = 10%' ? add footnote 'derating factors: -2 db in standard-performance mode. -3 db for cmv = 10 b , i.e. v cm = ( v aref 2%) / 2.0.' to sfdr tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.6 to 0.71 data sheet 4-464 v 1.1 2015-05 ? remove footnote 'derating factors: -2 db in standard-performance mode. -3 db for cmv = 10 b , i.e. v cm = ( v aref 2%) / 2.0.' from sfdr ? add footnote 'sfdr = 20 * log(inl / 2 n )' to sfdr ? change description of dvcm from 'common mode voltage accuracy' to 'common mode voltage accuracy' ? change description of dvcmh from 'commom mode hold voltage deviation' to 'common mode hold voltage deviation' ? change min value of snr from 70 db to 74 db ? change min value of snr from 65 db to 70 db ? change min value of snr from 72 db to 76 db ? add typ 100 khz to f pb ? add typ 30 khz to f pb ? evr/ldo/1.3v ? change note of dvout/diout from ' di =-150 ma ; tsettle =20 s ; pass device=off chip' to ' di =-150 ma ; tsettle =20 s ; pass device=off chip' ? change note of dvout/diout from ' di =100 ma ; tsettle =20 s ; pass device=off chip' to ' di =100 ma ; tsettle =20 s ; pass device=off chip' ? add max 6.3 f to c out ? add min 3 f to c out ? evr/ldo/3.3v ? change note of dvout/diout from ' di =100 ma ; tsettle =20 s ' to ' di =50 ma /20 ns ; tsettle =20 us ' ? change note of dvout/diout from ' di =-100 ma ; tsettle =20 s ' to ' di =-70 ma /20 ns ; tsettle =20 us ' ?flash ? change max value of t prd from 75 s to 50 + 2500/( f fsi [mhz]) s ? change note of t merp from 'for consecutive logical sectors in a physical sector' to 'for consecutive logical sectors in a physical sector, cycle count < 1000' ? change max value of t prp5 from 80 s to 50 + 3000/( f fsi [mhz]) s ? change max value of t prp3 from 115 s to 81 + 3400/( f fsi [mhz]) s ? change max value of t prpb5 from 220 s to 125 + 9500/( f fsi [mhz]) s ? change note of t prpb5_1mb from 'derived value for documentation purpose' to 'derived value for documentation purpose, valid for f fsi = 100mhz' ? change note of t prpb5_pf from 'derived value for documentation purpose' to 'derived value for documentation purpose, valid for f fsi = 100mhz' ? change note of t merd from 'for consecutive logical sectors' to 'f or consecutive logical sector range of size s, cycle count < 125000' ? change max value of t merd from 1 s to 0.928 + 0.019 * ( s [kbyte]) / ( f fsi [mhz]) s ? change max value of t prdb from 140 s to 96 + 4400/( f fsi [mhz]) s ? change max value of t spndd from 120 s to 12000/( f fsi [mhz]) s ? change max value of t prpb3 from 530 s to 410 + 12000/( f fsi [mhz]) s ? change max value of t add from 20 s to 15 + 500/( f fsi [mhz]) s ? change max value of t spndp from 120 s to 12000/( f fsi [mhz]) s ? change note of t erd from '' to 'cycle count < 125000' ? change max value of t erd from 1 s to 0.928 + 0.15/( f fsi [mhz]) s tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.71 to 1.0 data sheet 4-465 v 1.1 2015-05 ? add typ 0.207 + 0.003 * ( s [kbyte]) / ( f fsi [mhz]) s to t erp ? add typ 0.12 + 0.08/( f fsi [mhz]) s to t erd ? add typ 0.207 + 0.003 * ( s [kbyte]) / ( f fsi [mhz]) s to t merp ? add typ 0.12 + 0.01 * ( s [kbyte]) / ( f fsi [mhz]) s to t merd ? add typ 0.57 + 0.15/( f fsi [mhz]) s to t erd ? add typ 0.57 + 0.019 * ( s [kbyte]) / ( f fsi [mhz]) s to t merd ? changes in table 'class mp+ 3.3v' of standard_pads ? add 5.42 ns to class mp+ 3.3v ? add 5.9 ns to class mp+ 3.3v ? add 7.65 ns to class mp+ 3.3v ? add 7.36 ns to class mp+ 3.3v ? add 4.8 ns to class mp+ 3.3v ? add 5.32 ns to class mp+ 3.3v ? add max 5.42 ns to t mpp ? add max 5.9 ns to t mpp ? add max 7.65 ns to t mpp ? add max 7.36 ns to t mpp ? add max 4.8 ns to t mpp ? add max 5.32 ns to t mpp 4.2 changes from version version 0.71 to 1.0 ?dsadc ? change min value of i oz6 from -2 % to -3 a % ? dsadc_33v ? change min value of ed gain from -0.2 % to -0.3 % ? change max value of ed gain from 0.2 % to 0.3 % ? change min value of i oz6 from -2 % to -3 a % ? changes in table 'overload parameters' of overload ? change min value of i inana from -1 ma to -3 ma ? change note of k ovan from 'else; -1ma < i in < 0ma' to 'else; -5ma < i in < 0ma' ? change note of k ovan from '-5ma < i in < -1ma' to 'analog inputs overlaid with class lp pads or pull down diagnostics; -5ma < i in < -1ma' ? change max value of k ovan from 3*10 -3 to 1*10 -2 ? reset timings ? change max value of t bp from 1.1 ms to 1.11 ms ? vadc ? change typ value of q conv from 3 pc to 10 pc ? change typ value of q conv from 14 pc to 50 pc ? change min value of i oz3 from -1 a to -2.5 a ? change note of en rms from 'target' to '' ? change max value of q conv from 20 pc to 75 pc tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.71 to 1.0 data sheet 4-466 v 1.1 2015-05 ? change max value of q conv from 10 pc to 22 pc ? change max value of i oz2 from 2 a to 3 a ? change min value of i oz3 from -2.5 a to -4.5 a ? vadc_33v ? change typ value of q conv from 7 pc to 35 pc ? change type of qconv from sr to cc ? change typ value of q conv from 3 pc to 8 pc ? change max value of q conv from 15 pc to 50 pc ? change max value of q conv from 8 pc to 17 pc ? change max value of i oz2 from 2 a to 2.5 a ? change min value of i oz3 from -2 a to -2.2 a ? evr/dcdc ? update footnote of dcdc to 'incase of f sri running with max frequency, it shall be ensured that the v dd operating range is limited to 1.235v upto 1.430v. the dcdc may be configured in this case with a nominal voltage of 1.33v7.5%. the static accuracy and regula tion parameter ranges remain also valid for this case.' ? changes in table 'evr13 smps ex ternal components' of evr/dcdc ? changes in table 'master mode timing mpss output pads' of qspi/3.3v ? change max value of t 500 from 7+0.07 * c l ns to 5+0.04 * c l ns ? change min value of t 51 from -10 ns to -7 ns ? change max value of t 51 from 10 ns to 7 ns ? power supply ? change note of i dd from 'max power pattern. valid for feature package ta, tb, tx, and ty products' to 'max power pattern. valid for feature package ta and tb products' ? change max value of i dd from 900 ma to 950 ma ? change note of pd from 'max power patte rn ; valid for feature package ta, tb, tx, and ty products' to 'max power pattern ; valid for feature package ta and tb products' ? change max value of pd from 2310 mw to 2382 mw ? change description of i ddx3rail from ' sum of 3.3 v supply currents' to ' sum of 3.3 v supply currents without pad activity' ? change note of i ext/flex from 'real power pattern with port activity absent; porst output inactive.' to 'real power pattern; porst output inactive.' ? change description of i ddio from 'sum of i ext and i flex supply current' to 'sum of i ext and i flex supply current without pad activity' ? change description of i ddp3 from ' i ddp3 supply current with no pad activity' to ' i ddp3 supply current without pad activity' ? change note of i extlvdsm from '' to 'real power pattern' ? change note of i dd from 'max power pattern. valid for featur e package t, tp, and tc products' to 'max power pattern with fsri/cpux = 300 mhz with vdd = 1. 235v + 7.5%. valid for feature package t, tp, and tc products' ? add max 930 ma to i dd ? add max 2350 mw to pd ? operating conditions ? change note of t a from 'valid for all sal products with pa ckage' to 'valid for all sal products' tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.71 to 1.1 data sheet 4-467 v 1.1 2015-05 ? change note of t a from 'valid for all sal products with pa ckage' to 'valid for all sal products' 4.3 changes from version version 0.71 to 1.1 ? package chapter ? update information for vadc functions ?with pull down diagnostics? and ?md?, no change in pinning ? correct for p22.2 pu1 to pu ?dsadc ? change note of snr from ' f pb = 30 khz; v ddm = 5%' to ' f pb = 30 khz; v ddm = 5%; f mod = 20 mhz; gain = 1' ? add footnote 'the defined limits are only valid if the following conditio n is not applicable: t j > 150c and v varef > v ddm .' to snr ? change note of i oz6 from '-2 a' to '-3 a' ? change note of snr from ' f pb = 100 khz; v ddm = 10%' to ' f pb = 100 khz; v ddm = 10%; f mod = 20 mhz; gain = 1' ? remove footnote 'systemat ic offset shift' from ed off ? add footnote 'the total dc error for the uncalibrated ca se can be calculated by the geometric addition of ed gain and ed off ' to ed off ? change note of ed gain from 'calibrated' to 'calibra ted; gain = 1; modcfg.incfgx=01' ? dsadc_33v ? change note of snr from ' f pb = 30khz; v ddm = 5%' to ' f pb = 30khz; v ddm = 5%; f mod = 20 mhz; gain = 1' ? change min value of ed gain from -0.2 % to -0.3 % ? change note of ed gain from '0.2 %' to '0.3 %' ? change min value of i oz6 from -2 a to -3 a ? change note of snr from ' f pb = 100khz; v ddm = 10%' to ' f pb = 100khz; v ddm = 10%; f mod = 20 mhz; gain = 1' ? remove footnote 'systemat ic offset shift' from ed off ? add footnote 'the total dc error for the uncalibrated ca se can be calculated by the geometric addition of ed gain and ed off ' to ed gain ( ? change note of ed gain from 'calibrated' to 'calibrate d; gain = 1; modcfg.incfgx=01' ? change min value of ed off from -350 mv to -100 mv ? change typ value of ed off from -150 mv to 0 mv ? change maxvalue of ed off from 0 mv to 100 mv ? changes in table 'overload parameters' of overload ? remove i insa ? change note of i inana from '-1 ma' to '-3 ma' ? change note of k ovan from ''-5ma < i in < -1ma'' to ''analog inputs overlaid with class lp pads or pull down diagnostics; -5ma < i in < -1ma'' ? change note of k ovan from '3*10 -3 ' to '1*10 -2 ' ? change note of k ovan from 'else; -1ma < i in < 0ma' to 'else; -5ma < i in < 0ma' ? reset timings ? change max value of t bp from 1.1 ms to 1.11 ms tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.71 to 1.1 data sheet 4-468 v 1.1 2015-05 ? vadc ? change max value of i oz2 from 2 a to 3 a ? change min value of i oz3 from -1 a to -2.5 a ? change min value of i oz3 from '-2.5 a' to '-4.5 a' ? change note of en rms from 'target' to '' ? change max value of q conv from 20 pc to 75 pc ? change note of q conv from '10 pc' to '22 pc' ? change typ value of q conv from 14 pc to 50 pc ? change typ value of q conv from 3 pc to 10 pc ? change max value of en rms from 0.75 lsb to 0.8 lsb ? remove c aint ? change footnote ' if the reference voltage is redu ced by the factor k (k < 1), tu e,dnl,inl,gain, and offset errors increase also by the factor 1/k. ' to 'if the reference voltage is reduced by the factor k (k < 1), tue,dnl,inl,gain, and offset errors increase also by the factor 1/k. v aref must be decoupled with an external capacitor.' to v aref ? vadc_33v ? change note of i oz2 from '2 a' to '2.5 a' ? change note of i oz3 from '-2 a' to '-2.2 a' ? change max value of q conv from 15 pc to 50 pc ? change max value of q conv from 8 pc to 17 pc ? change note of q conv from '7 pc' to '35 pc' ? change type of qconv from sr to cc ? change typ value of q conv from 3 pc to 8 pc ? change note of en rms from '1.5 lsb' to '1.7 lsb' ? remove c aint ? change footnote ' if the reference voltage is redu ced by the factor k (k < 1), tu e,dnl,inl,gain, and offset errors increase also by the factor 1/k. ' to 'if the reference voltage is reduced by the factor k (k < 1), tue,dnl,inl,gain, and offset errors increase also by the factor 1/k. v aref must be decoupled with an external capacitor.' to v aref ? evr/dcdc ? update footnote of dcdc to 'incase of f sri running with max frequency, it shall be ensured that the v dd operating range is limited to 1.235v upto 1.430v. the dcdc may be configured in this case with a nominal voltage of 1.33v7.5%. the static accuracy and regula tion parameter ranges remain also valid for this case.' ? changes in table 'evr13 smps ex ternal components' of evr/dcdc ? add footnote 'if freq uency spreading (sdfreqsprd = 1) is activat ed, an additional ripple of 1% need to be considered.' to dvdddc ? changes in table 'master mode timing mpss output pads' of qspi/3.3v ? change note of t 51 from '-10 ns' to '-7 ns' ? change note of t 51 from '10 ns' to '7 ns' ? change note of t 500 from '7+0.07 * c l ns' to '5+0.04 * c l ns' ? power supply ? add max 930 ma to i dd ? add max 2350 mw to pd tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 tc290 / TC297 / tc29 8 / tc299 bb-step historychanges from version version 0.71 to 1.1 data sheet 4-469 v 1.1 2015-05 ? change note of i dd from 'max power pattern. valid for feature package ta, tb, tx, and ty products' to 'max power pattern. valid for feature package ta and tb products' ? change max value of i dd from 900 ma to 950 ma ? change note of pd from 'max power patte rn ; valid for feature package ta, tb, tx, and ty products' to 'max power pattern ; valid for feature package ta and tb products' ? change max value of pd from 2310 mw to 2382 mw ? change note of i ext/flex from 'real power pattern with port activity absent; porst output inactive.' to 'real power pattern; porst output inactive.' ? change description of i ddio from 'sum of i ext and i flex supply current' to 'sum of i ext and i flex supply current without pad activity' ? change note of i extlvdsm from '' to 'real power pattern' ? change note of i ddc20 from 'measured at nominal vdd +2%.' to 'real power pattern' ? change note of i dd from 'max power pattern with f sri/cpux = 270 mhz with v dd = 1.235v + 7.5%; valid for feature package t, tp, and tc products' to 'max power pattern with f sri/cpux = 270 mhz with v dd = 1.3v + 10%; valid for feature package t, tp, and tc products' ? change description of i ddp3 from ' i ddp3 supply current with no pad activity' to ' i ddp3 supply current without pad activity' ? change description of i ddx3rail from ' sum of 3.3 v supply currents' to ' sum of 3.3 v supply currents without pad activity' ? absolute maximum ratings ? add footnote 'voltages below v inmin have no impact to the device reliabiltiy as long as the times and currents defined in section pin reliability in overl oad for the affected pad(s) are not violated.' to v ina ? add footnote 'voltages below v inmin have no impact to the device reliabiltiy as long as the times and currents defined in section pin reliability in overl oad for the affected pad(s) are not violated.' to v inb ? operating conditions ? change note of t a from 'valid for all sal products with package' to 'valid fo r all sal products' ? change note of t a from 'valid for all sal products with package' to 'valid fo r all sal products' ? changes in table 'class a2' of standard_pads ? change note of v iha2 from 'ttl;else' to 'ttl ;valid for all a2 pads e xcept tms/dap1, trst, and tck/dap0' ? change note of v ila2 from 'ttl;else' to 'ttl ;valid for all a2 pads except tms/dap1, trst, and tck/dap0' ? changes in table 'i2c standard mode timing' of i2c ? change predicate of t 7 from max to min ? evr/supply monitoring ? change note of v extmon from 'swdxxval v ext monitoring threshold=5v=dbh' to 'swdxxval v ext monitoring threshold=5v=da h ' ? change note of v ddp3mon from 'evr33xxval v ddp3 monitoring threshold=3.3v=91h' to 'evr33xxval v ddp3 monitoring threshold=3.3v=90 h ' ? change note of v ddmon from 'evr13xxval v dd monitoring threshold=1.3v=e4h' to 'evr13xxval v dd monitoring threshold=1.3v=df h ' tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 published by infineon technologies ag www.infineon.com tc290/TC297/tc298/tc299 bb-step data sheet downloaded by saravanakumar maniyam (larsen and toubro limited) at 08 sep 2015 08:06 |
Price & Availability of TC297
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |